This patch add binding documentation for Exynos5433 clock controller.
Exynos5433 has various clock domains So, this documentation explains
the detailed clock domains ans usage guide.
Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Acked-by: Geunsik Lim <geunsik.lim@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 106 +++++++++++++++++++++
1 file changed, 106 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/exynos5433-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
new file mode 100644
index 0000000..72cd0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -0,0 +1,106 @@
+* Samsung Exynos5433 CMU (Clock Management Units)
+
+The Exynos5433 clock controller generates and supplies clock to various
+controllers within the Exynos5433 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
+ which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
+ domains and bus clocks.
+ - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
+ which generates clocks for LLI (Low Latency Interface) IP.
+ - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
+ which generates clocks for DRAM Memory Controller domain.
+ - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
+ which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
+ - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
+ which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
+ - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
+ which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5433.h header and can be used in device
+tree sources.
+
+Example 1: Examples of clock controller nodes are listed below.
+
+ cmu_top: clock-controller@0x10030000 {
+ compatible = "samsung,exynos5433-cmu-top";
+ reg = <0x10030000 0x0c04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_cpif: clock-controller@0x10fc0000 {
+ compatible = "samsung,exynos5433-cmu-cpif";
+ reg = <0x10fc0000 0x0c04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_mif: clock-controller@0x105b0000 {
+ compatible = "samsung,exynos5433-cmu-mif";
+ reg = <0x105b0000 0x100c>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peric: clock-controller@0x14c80000 {
+ compatible = "samsung,exynos5433-cmu-peric";
+ reg = <0x14c80000 0x0b08>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peris: clock-controller@0x10040000 {
+ compatible = "samsung,exynos5433-cmu-peris";
+ reg = <0x10040000 0x0b20>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller@0x156e0000 {
+ compatible = "samsung,exynos5433-cmu-fsys";
+ reg = <0x156e0000 0x0b04>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller.
+
+ serial_0: serial@14C10000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14C10000 0x100>;
+ interrupts = <0 421 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART0>,
+ <&cmu_peric CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ status = "disabled";
+ };
+
+Example 3: SPI controller node that consumes the clock generated by the clock
+ controller.
+
+ spi_0: spi@14d20000 {
+ compatible = "samsung,exynos7-spi";
+ reg = <0x14d20000 0x100>;
+ interrupts = <0 432 0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI0>,
+ <&cmu_top CLK_SCLK_SPI0_PERIC>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ status = "disabled";
+ };
--
1.8.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
