Hi Alim,
On Sat, Nov 22, 2014 at 7:07 PM, Alim Akhtar <alim.akhtar@xxxxxxxxx> wrote:
> Hi Vivek,
>
> On Fri, Nov 21, 2014 at 7:05 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
>> USB and Power regulator on Exynos7 require gpios available
>> in BUS1 pin controller block.
>> So adding the BUS1 pinctrl support.
>>
>> Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
>> ---
>> drivers/pinctrl/samsung/pinctrl-exynos.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
>> index d5d4cfc..caca5b5 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
>> @@ -1300,6 +1300,13 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
>> EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
>> };
>>
>> +/* pin banks of exynos7 pin-controller - BUS1 */
>> +static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
>> + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
>> + EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
>> + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
>> +};
>> +
> Looks like you are just trying to touch pin banks only related to USB
> stuffs, but as this patch does not have any dependencies on other
> patches in this series, will you consider adding other pin banks of
> BUS1, just for completeness of BUS1 pin-controller.
True, this just touches the USB related pinctrl.
Will add the rest pin banks of BUS1 for completeness.
Thanks for pointing out. :-)
[snip]
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
