Re: [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 30, 2014 at 01:34:29PM +0530, Pankaj Dubey wrote:
> Let's handle i2c interrupt re-configuration in i2c driver. This will
> help us in removing some soc specific checks from machine files and
> will help in removing static iomapping of SYS register in exynos.c
> 
> Since only Exynos5250, and Exynos5420 has i2c nodes in DT, added syscon
> based phandle to i2c device nodes of respective SoC DT files.
> 
> Also handle saving and restoring of SYS_I2C_CFG register during
> suspend and resume of i2c driver.
> 
> CC: Rob Herring <robh+dt@xxxxxxxxxx>
> CC: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> CC: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> CC: Russell King <linux@xxxxxxxxxxxxxxxx>
> CC: devicetree@xxxxxxxxxxxxxxx
> CC: linux-doc@xxxxxxxxxxxxxxx
> CC: linux-i2c@xxxxxxxxxxxxxxx
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/i2c/i2c-s3c2410.txt        |    1 +
>  arch/arm/boot/dts/exynos5250.dtsi                  |    4 +++
>  arch/arm/boot/dts/exynos5420.dtsi                  |    4 +++

I usually don't take DTS patches. They should go via arm-soc. Please say
so if there are reasons I should take them.

> @@ -1084,6 +1092,23 @@ s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
>  	of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
>  	of_property_read_u32(np, "samsung,i2c-max-bus-freq",
>  				(u32 *)&pdata->frequency);
> +	/*
> +	 * Exynos5's legacy i2c controller and new high speed i2c
> +	 * controller have muxed interrupt sources. By default the
> +	 * interrupts for 4-channel HS-I2C controller are enabled.
> +	 * If node for first four channels of legacy i2c controller

s/node/nodes/

> +	 * are available then re-configure the interrupts via the
> +	 * system register.
> +	 */
> +	id = of_alias_get_id(np, "i2c");
> +	i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
> +			"samsung,sysreg-phandle");
> +	if (IS_ERR(i2c->sysreg)) {
> +		/* As this is not compulsory do not return error */
> +		pr_info("i2c-%d skipping re-configuration of interrutps\n", id);

I'd say drop this message. If you want to keep it, it should be dev_dbg.

> +		return;
> +	}
> +	regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
>  }

Rest looks good, thanks!

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux