Hi Javier,
On Thu, Nov 20, 2014 at 2:15 PM, Javier Martinez Canillas
<javier.martinez@xxxxxxxxxxxxxxx> wrote:
> Hello Vivek,
>
> On 11/20/2014 08:51 AM, Vivek Gautam wrote:
>>>
>>> I tested linux-next on Exynos5800 peach-pi board with linux-next and and the two
>>> patches $Subject and [0].
>>>
>>> Below is my git hash:
>>> 4d9e6ee drm/exynos: Move platform drivers registration to module init
>>> 4545ed4 POSTED: arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy
>>> 36391a5 Add linux-next specific files for 20141119
>>> 9b1ced1 Merge branch 'akpm/master'
>>> 282497e mm: add strictlimit knob
>>
>> used exynos_defconfig
>>
>
> Same here.
>
>>>
>>> With this display works for me.
>>> Without $Subject patch i get lookup in drm.
>>>
>
> I tested with today linux-next (next-20141120) and display is indeed
> working for me. So it seems that whatever caused the error in the
> phy-exynos-mipi-video driver reported by Paolo, got fixed recently.
>
> My working git hash is:
>
> 65a8d01 arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy
> a9b43cb drm/exynos: Move platform drivers registration to module init
> 5b83d7a Add linux-next specific files for 20141120
> 1172916 mm: add strictlimit knob
>
> I did have to disable CONFIG_SND_SOC_SNOW though, otherwise the kernel
> did not boot due the issue reported previously by Kevin.
>
>>> Javier can you tell me your git hash. Was it on yesterday's linux-next ?
>>
>
> In fact, my branch where I could reproduce the phy-exynos-mipi-video issue
> was not based on yesterday's next but next-20141117. The git hash is:
>
> 9fb5d7c arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy
> f740096 drm/exynos: Move platform drivers registration to module init
> efefb5c Add linux-next specific files for 20141117
> 8c944d7 mm: add strictlimit knob
>
>> With 3.18-rc5 i could see display on Exynos5800 peach-pi with
>> following git hash:
>>
>> b6dca11 drm/exynos: dp: Remove support for unused dptx-phy
>> 7cc5c2d ARM: exynos_defconfig: Enable options for display panel support
>> d0aca5e arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy
>> fc14f9c Linux 3.18-rc5
>> e35c5a2 Merge tag 'armsoc-for-rc5' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
>>
>> I don't need this drm lockup patch with 3.18-rc5 (with exynos_defconfig).
>>
>
> Yes, that works because the commit that caused the Exynos DRM lockup was:
>
> 43c0767 ("of/platform: Move platform devices under /sys/devices/platform")
>
> which landed in next-20141105.
>
> Reverting 43c0767 and only applying [0] should have the same effect.
>
>> I am checking further with linux-samsung, coz i could see weird
>> behavior as mentioned
>> in [1] with linux-samsun/for-next merged with above git hash.
>>
>
> Great, it should be good to know what caused:
On linux-samsung tree the only patch that's missing apart from dptx-phy patches
is the syscon patch from Pankaj Dubey:
b784b98 mfd: syscon: Decouple syscon interface from platform devices
So with below git hash, linux-samsung/for-next display works fine along with
other devices that request PMU system controller :
7bd219e drm/exynos: dp: Remove support for unused dptx-phy
e8f21fd arm: dts: Exynos5: Use pmu_system_controller phandle for dp phy
7099bde Revert "Revert "ARM: exynos_defconfig: Enable options for
display panel support""
713a994 mfd: syscon: Decouple syscon interface from platform devices
7552917 Revert "ARM: exynos_defconfig: Enable options for display
panel support" /* This is Kukjin's for-next today */
ff0391a Merge branch 'v3.19-samsung-defconfig' into for-next
26c6283 Merge branch 'v3.18-samsung-fixes' into for-next
cf864fd Merge branch 'v3.18-samsung-defconfig' into for-next
98b6380 ARM: exynos_defconfig: Enable max77802 rtc and clock drivers
839275c ARM: exynos_defconfig: Use 16 minors per MMC block device
0526f27 ARM: dts: Explicitly set dr_mode on exynos5250-snow
fc14f9c Linux 3.18-rc5
>
> exynos-mipi-video-phy 10040714.video-phy: can't request region for resource [mem 0x10040714-0x1004071f]
The only reason i see this fails is since PMU is now requesting the
entire memory
region with base 0x10040000. We should convert the mipi-phy pmu
register handling
too through syscon.
>
> even when I could not reproduce it anymore with today's linux-next.
>
>>>> [0]: https://lkml.org/lkml/2014/10/30/394
>>>> [1]: http://www.spinics.net/lists/linux-samsung-soc/msg39032.html
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
