On 11/18/14 15:36, Chanwoo Choi wrote: > Dear Kukjin, > Hi, > Could you please review or pick this patchset? > > Best Regards, > Chanwoo Choi > > On 10/08/2014 11:11 AM, YoungJun Cho wrote: >> From: Youngjun Cho <yj44.cho@xxxxxxxxxxx> >> >> This patch adds new board dts file to support Samsung Monk board which is >> based on Exynos3250 SoC and has different H/W configuration from Rinato. >> >> This patch is based on linux-samsung.git for-next branch and depends on >> [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board >> >> Changes from v1: >> - The 'memory' entries coalesce into one entry >> - Removes useless space >> - Puts voltage-regulator-0 under the root node >> >> This dts file support following features: >> - eMMC >> - Main PMIC (Samsung S2MPS14) >> - Interface PMIC (Maxim MAX77836, MUIC, fuel-gauge, charger) >> - RTC of Exynos3250 >> - ADC of Exynos3250 with NTC thermistor >> - I2S of Exynos3250 >> - TMU of Exynos3250 >> - Secure firmware for Exynos3250 secondary cpu boot >> - Serial ports of Exynos3250 >> - gpio-key for power key >> >> Signed-off-by: Youngjun Cho <yj44.cho@xxxxxxxxxxx> >> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> >> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx> >> Signed-off-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx> >> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> >> --- >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/exynos3250-monk.dts | 583 ++++++++++++++++++++++++++++++++++ >> 2 files changed, 585 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/exynos3250-monk.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 5728918..0c8ae64 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \ >> dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ >> da850-evm.dtb >> dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb >> -dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-rinato.dtb \ >> +dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \ >> + exynos3250-rinato.dtb \ >> exynos4210-origen.dtb \ >> exynos4210-smdkv310.dtb \ >> exynos4210-trats.dtb \ >> diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts >> new file mode 100644 >> index 0000000..615672f >> --- /dev/null >> +++ b/arch/arm/boot/dts/exynos3250-monk.dts >> @@ -0,0 +1,583 @@ >> +/* >> + * Samsung's Exynos3250 based Monk board device tree source >> + * >> + * Copyright (c) 2014 Samsung Electronics Co., Ltd. >> + * http://www.samsung.com >> + * >> + * Device tree source file for Samsung's Monk board which is based on >> + * Samsung Exynos3250 SoC. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +/dts-v1/; >> +#include "exynos3250.dtsi" >> +#include <dt-bindings/input/input.h> >> + >> +/ { >> + model = "Samsung Monk board"; >> + compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3"; >> + >> + aliases { >> + i2c7 = &i2c_max77836; >> + }; >> + >> + memory { >> + reg = <0x40000000 0x1ff00000>; >> + }; >> + >> + chosen { >> + bootargs = "console=ttySAC1,115200N8 root=/dev/mmcblk0p15 rootwait earlyprintk panic=5"; Actually, the bootargs can be supplied from bootloader and can be removed from here and it's a recent requirement from mailinglist. But I've already applied similar one in rinato.dts. So please cleanup them together later...? :) [snip] Will apply, thanks. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |