Hi Abhilash, On 13 November 2014 18:50, Abhilash Kesavan <kesavan.abhilash@xxxxxxxxx> wrote: > Hello Tyler, > > On Fri, Nov 14, 2014 at 3:30 AM, Tyler Baker <tyler.baker@xxxxxxxxxx> wrote: >> In recent upstream kernels, exynos5420-based arndale boards have been > > Boot logs are only for 5250, typo ? Apologies, this is a typo. Should have been 5250 as you mentioned. > >> producing boot-time errors due to the fact they failed to set the cpu >> voltage. These message flood the serial console even after userspace >> has been loaded, yielding the console unusable without forcing a lower >> log level. These errors are produced _only_ with the >> multi_v7_defconfig and they are _not_ present >> with exynos_defconfig. Here are some recent boot logs showing the boot errors: >> >> mainline/v3.18-rc4-65-g2c54396: >> multi_v7_defconfig: >> http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc4-65-g2c54396/arm-multi_v7_defconfig/boot-exynos5250-arndale.html >> exynos_defconfig: >> http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc4-65-g2c54396/arm-exynos_defconfig/boot-exynos5250-arndale.html > > From the boot logs it appears that the S5M8767 regulator does not get > probed with multi_v7_defconfig and you get the following messages: > > [ 1.147412] deviceless supply vdd_arm not found, using dummy regulator > [ 1.152669] exynos-cpufreq exynos-cpufreq: failed to set cpu > voltage to 1300000 > [ 1.159771] cpufreq: __target_index: Failed to change cpu frequency: -22 > > Both multi_v7_defconfig and exynos_defconfig have the S5M8767 > regulator enabled. However multi_v7_defconfig does not have the S3C > I2C controller enabled while exynos_defconfig does. > Can you re-check after enabling CONFIG_I2C_S3C2410 ? I have retested my two arndale boards with multi_v7_defconfg+CONFIG_I2C_S3C2410=y on mainline, next, and arm-soc. Enabling S3C I2C controller does resolve the issue I have reported above. It seems reasonable to patch the multi_v7_defconfig to enable this option by default, thoughts? > > Regards, > Abhilash > >> >> next/next-20141113: >> multi_v7_defconfig: >> http://storage.armcloud.us/kernel-ci/next/next-20141113/arm-multi_v7_defconfig/boot-exynos5250-arndale.html >> exynos_defconfig: >> http://storage.armcloud.us/kernel-ci/next/next-20141113/arm-exynos_defconfig/boot-exynos5250-arndale.html >> >> arm-soc/v3.18-rc4-185-gbfcf8f9: >> multi_v7_defconfig: >> http://storage.armcloud.us/kernel-ci/arm-soc/v3.18-rc4-185-gbfcf8f9/arm-multi_v7_defconfig/boot-exynos5250-arndale.html >> exynos_defconfig: >> http://storage.armcloud.us/kernel-ci/arm-soc/v3.18-rc4-185-gbfcf8f9/arm-exynos_defconfig/boot-exynos5250-arndale.html >> >> Cheers, >> >> -- >> Tyler Baker >> Tech Lead, LAVA >> Linaro.org | Open source software for ARM SoCs >> Follow Linaro: http://www.facebook.com/pages/Linaro >> http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel Cheers, -- Tyler Baker Tech Lead, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html