[PATCH v7 0/2] Fine tune USB 3.0 PHY on exynos5420

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series is tested with V3 of Heikki's patches for simpliefied phy lookup table:
[PATCHv3 0/6] phy: simplified phy lookup [1] on 'usb-next' branch.
V4 of this series is giving some issue, which i have already pointed out in the
patch: [PATCHv4 2/6] phy: improved lookup method

Changes since v6:
 - Dropped the changes for adding additional phy_calibrate() callback.
 - Added phy_init() and phy_power_on() sequence in xhci-plat driver;
   NOTE: both phy_init() and phy_power_on() will now require PHY's
         'init_count' and 'power_count' to be reset to '0' so that
         we can actually re-initialize the phy. Though this has already been
         pointed out in discussion for the previous patch-series. [2]
 - Refactored return codes and error handling in cr_port functions as pointed
   out by Felipe.

Changes since v5:
 - Assigned NULL to hcd->gen_phy in error path in xhci-plat.c, so that
   we don't need to check for IS_ERR() while calibrating the PHYs in
   core/hcd.c
 - Removed extra empty lines in register definitions in exynos5-usbdrd
   phy driver.
 - Added write access for EXYNOS5_DRD_PHYREG0 register before any
   crport_handshake() call as suggested by Jingoo Han.
 - Renamed member 'calibrate' to 'phy_exynos_calibrate' of
   struct exynos5_usbdrd_phy_drvdata.

Changes since v4:
 - Rebased on latest patches by Heikki.
 - Took care of handling -EPROBE_DEFER error number while getting PHY in
   xhci plat.

Changes from v3:
 - Modified error message as per review comments from Julius.

Changes since v2:
 - Removed any check for DWC3 in xhci-plat for getting usb2-phy and usb3-phy,
   in order to make it more generic.
 - Moved the phy_calibration calls to core/hcd.c to enable a more generic
   solution for issues of calibrating the PHYs.

Changes since v1:
 - Using 'gen_phy' member of 'hcd' instead of declaring more variables
   to hold phys.
 - Added a check for compatible match for 'Synopsys-dwc3' controller,
   since the 'gen_phy' member of 'hcd' already gets the 'usb' PHY
   in core/hcd.c; but XHCI on Synopsys-dwc3 doesn't need that,
   instead two separate PHYs for UTMI+ and PIPE3 for the two HCDs
   (main hcd and shared hcd).
 - Restructured the code in 'xhci_plat_setup()' and 'xhci_plat_resume()'
   to use hcd->gen_phy directly. Also added the check for Synopsys's DWC3
   controller while trying to calibrate the PHY.

Explanation for the need of this patch-series:
"The DWC3-exynos eXtensible host controller present on Exynos5420/5800
SoCs is quirky. The PHY serving this controller operates at High-Speed
by default, so it detects even Super-speed devices as high-speed ones.
Certain PHY parameters like Tx LOS levels and Boost levels need to be
calibrated further post initialization of xHCI controller, to get
SuperSpeed operations working."

[1] https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg710094.html
[2] https://lkml.org/lkml/2014/9/2/170;   (to be specific https://lkml.org/lkml/2014/9/10/132)

Vivek Gautam (2):
  usb: host: xhci-plat: Get PHYs for xhci's hcds
  phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800

 drivers/phy/phy-exynos5-usbdrd.c |  219 +++++++++++++++++++++++++++++++++++---
 drivers/usb/host/xhci-plat.c     |   74 +++++++++++++
 2 files changed, 277 insertions(+), 16 deletions(-)

-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux