Re: [PATCH v2 1/3] iio: exyno-adc: use syscon for PMU register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,


CC'ing Naveen's gmail id, since the Samsung id is invalid now.


On Tue, Sep 16, 2014 at 2:28 PM, Naveen Krishna Chatradhi
<ch.naveen@xxxxxxxxxxx> wrote:
> This patch updates the IIO based ADC driver to use syscon and regmap
> APIs to access and use PMU registers instead of remapping the PMU
> registers in the driver.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> To: linux-iio@xxxxxxxxxxxxxxx
> ---
> Changes since v1:
> Rebased on top of togreg branch of IIO git

If the changes look good, then first two patches of this series can be
picked up ?
The last dt patch then belongs to samsung tree.

>
>  drivers/iio/adc/exynos_adc.c |   30 +++++++++++++++++++++---------
>  1 file changed, 21 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index 43620fd..fe03177 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -39,6 +39,8 @@
>  #include <linux/iio/iio.h>
>  #include <linux/iio/machine.h>
>  #include <linux/iio/driver.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>
>  /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
>  #define ADC_V1_CON(x)          ((x) + 0x00)
> @@ -90,11 +92,14 @@
>
>  #define EXYNOS_ADC_TIMEOUT     (msecs_to_jiffies(100))
>
> +#define EXYNOS_ADCV1_PHY_OFFSET        0x0718
> +#define EXYNOS_ADCV2_PHY_OFFSET        0x0720
> +
>  struct exynos_adc {
>         struct exynos_adc_data  *data;
>         struct device           *dev;
>         void __iomem            *regs;
> -       void __iomem            *enable_reg;
> +       struct regmap           *pmu_map;
>         struct clk              *clk;
>         struct clk              *sclk;
>         unsigned int            irq;
> @@ -110,6 +115,7 @@ struct exynos_adc_data {
>         int num_channels;
>         bool needs_sclk;
>         bool needs_adc_phy;
> +       int phy_offset;
>         u32 mask;
>
>         void (*init_hw)(struct exynos_adc *info);
> @@ -183,7 +189,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
>         u32 con1;
>
>         if (info->data->needs_adc_phy)
> -               writel(1, info->enable_reg);
> +               regmap_write(info->pmu_map, info->data->phy_offset, 1);
>
>         /* set default prescaler values and Enable prescaler */
>         con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
> @@ -198,7 +204,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
>         u32 con;
>
>         if (info->data->needs_adc_phy)
> -               writel(0, info->enable_reg);
> +               regmap_write(info->pmu_map, info->data->phy_offset, 0);
>
>         con = readl(ADC_V1_CON(info->regs));
>         con |= ADC_V1_CON_STANDBY;
> @@ -225,6 +231,7 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
>         .num_channels   = MAX_ADC_V1_CHANNELS,
>         .mask           = ADC_DATX_MASK,        /* 12 bit ADC resolution */
>         .needs_adc_phy  = true,
> +       .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
>
>         .init_hw        = exynos_adc_v1_init_hw,
>         .exit_hw        = exynos_adc_v1_exit_hw,
> @@ -314,7 +321,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
>         u32 con1, con2;
>
>         if (info->data->needs_adc_phy)
> -               writel(1, info->enable_reg);
> +               regmap_write(info->pmu_map, info->data->phy_offset, 1);
>
>         con1 = ADC_V2_CON1_SOFT_RESET;
>         writel(con1, ADC_V2_CON1(info->regs));
> @@ -332,7 +339,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
>         u32 con;
>
>         if (info->data->needs_adc_phy)
> -               writel(0, info->enable_reg);
> +               regmap_write(info->pmu_map, info->data->phy_offset, 0);
>
>         con = readl(ADC_V2_CON1(info->regs));
>         con &= ~ADC_CON_EN_START;
> @@ -362,6 +369,7 @@ static const struct exynos_adc_data exynos_adc_v2_data = {
>         .num_channels   = MAX_ADC_V2_CHANNELS,
>         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
>         .needs_adc_phy  = true,
> +       .phy_offset     = EXYNOS_ADCV2_PHY_OFFSET,
>
>         .init_hw        = exynos_adc_v2_init_hw,
>         .exit_hw        = exynos_adc_v2_exit_hw,
> @@ -374,6 +382,7 @@ static const struct exynos_adc_data exynos3250_adc_data = {
>         .mask           = ADC_DATX_MASK, /* 12 bit ADC resolution */
>         .needs_sclk     = true,
>         .needs_adc_phy  = true,
> +       .phy_offset     = EXYNOS_ADCV1_PHY_OFFSET,
>
>         .init_hw        = exynos_adc_v2_init_hw,
>         .exit_hw        = exynos_adc_v2_exit_hw,
> @@ -558,10 +567,13 @@ static int exynos_adc_probe(struct platform_device *pdev)
>
>
>         if (info->data->needs_adc_phy) {
> -               mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -               info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
> -               if (IS_ERR(info->enable_reg))
> -                       return PTR_ERR(info->enable_reg);
> +               info->pmu_map = syscon_regmap_lookup_by_phandle(
> +                                       pdev->dev.of_node,
> +                                       "samsung,syscon-phandle");
> +               if (IS_ERR(info->pmu_map)) {
> +                       dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
> +                       return PTR_ERR(info->pmu_map);
> +               }
>         }
>
>         irq = platform_get_irq(pdev, 0);
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux