Re: [PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kukjin

On Tue, Oct 28, 2014 at 4:01 PM, Kukjin Kim <kgene@xxxxxxxxxx> wrote:
> Abhilash Kesavan wrote:
>>
> Hi,
>
> Sorry for late response.
>
>> Remove symbols SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS which
>> select the number of UART ports available on the SoC. Replace the usage
>> of SERIAL_SAMSUNG_UARTS in the serial driver with the maximum number of
>
> Well, as you know the number of uart ports are different on each Samsung SoCs
> so I don't think just using maximum number of uart ports are possible for new
> exynos7 SoC at this moment.

Thanks for the review.
The main reason for me sending this patch was so that we may be able
to re-use the serial driver on arm64 based Exynos7 too. The two
symbols mentioned above which depend on PLAT_SAMSUNG prevent this. I
initially sent a patch which changed the dependency to SERIAL_SAMSUNG
for these 2 symbols. However, Tomasz suggested that a clean-up of
these two symbols would be a better option.

Please see the discussion of the previous version here:
https://lkml.org/lkml/2014/9/29/702

Can you please let me know if the previous version is acceptable ?

>
>> UART ports possible. Removal of these symbols also helps in Exynos7
>> serial enablement.
>>
>> Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
>> Reviewed-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
>> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
>> ---
>>  drivers/tty/serial/Kconfig   |   16 ----------------
>>  drivers/tty/serial/samsung.c |   11 +++--------
>>  drivers/tty/serial/samsung.h |    5 ++++-
>>  3 files changed, 7 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
>> index 81f6ee7..9fc9092 100644
>> --- a/drivers/tty/serial/Kconfig
>> +++ b/drivers/tty/serial/Kconfig
>> @@ -247,22 +247,6 @@ config SERIAL_SAMSUNG
>>         provide all of these ports, depending on how the serial port
>>         pins are configured.
>>
>> -config SERIAL_SAMSUNG_UARTS_4
>> -     bool
>> -     depends on PLAT_SAMSUNG
>> -     default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
>> -     help
>> -       Internal node for the common case of 4 Samsung compatible UARTs
>> -
>> -config SERIAL_SAMSUNG_UARTS
>> -     int
>> -     depends on PLAT_SAMSUNG
>> -     default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
>> -     default 3
>> -     help
>> -       Select the number of available UART ports for the Samsung S3C
>> -       serial driver
>> -
>>  config SERIAL_SAMSUNG_DEBUG
>>       bool "Samsung SoC serial debug"
>>       depends on SERIAL_SAMSUNG && DEBUG_LL
>> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
>> index c78f43a..ba04c6d 100644
>> --- a/drivers/tty/serial/samsung.c
>> +++ b/drivers/tty/serial/samsung.c
>> @@ -962,14 +962,14 @@ static struct uart_ops s3c24xx_serial_ops = {
>>  static struct uart_driver s3c24xx_uart_drv = {
>>       .owner          = THIS_MODULE,
>>       .driver_name    = "s3c2410_serial",
>> -     .nr             = CONFIG_SERIAL_SAMSUNG_UARTS,
>> +     .nr             = MAX_SAMSUNG_UARTS,
>>       .cons           = S3C24XX_SERIAL_CONSOLE,
>>       .dev_name       = S3C24XX_SERIAL_NAME,
>>       .major          = S3C24XX_SERIAL_MAJOR,
>>       .minor          = S3C24XX_SERIAL_MINOR,
>>  };
>>
>> -static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
>> +static struct s3c24xx_uart_port s3c24xx_serial_ports[MAX_SAMSUNG_UARTS] = {
>>       [0] = {
>>               .port = {
>>                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
>> @@ -992,8 +992,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>>                       .line           = 1,
>>               }
>>       },
>> -#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
>> -
>>       [2] = {
>>               .port = {
>>                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock),
>> @@ -1005,8 +1003,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>>                       .line           = 2,
>>               }
>>       },
>> -#endif
>> -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
>>       [3] = {
>>               .port = {
>>                       .lock           = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock),
>> @@ -1018,7 +1014,6 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
>>                       .line           = 3,
>>               }
>>       }
>> -#endif
>>  };
>>
>>  /* s3c24xx_serial_resetport
>> @@ -1590,7 +1585,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
>>
>>       /* is this a valid port */
>>
>> -     if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
>> +     if (co->index == -1 || co->index >= MAX_SAMSUNG_UARTS)
>
> If we use max number, second condition is not required...
>
>>               co->index = 0;
>>
>>       port = &s3c24xx_serial_ports[co->index].port;
>> diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
>> index eb071dd..484b49e 100644
>> --- a/drivers/tty/serial/samsung.h
>> +++ b/drivers/tty/serial/samsung.h
>> @@ -1,6 +1,9 @@
>>  #ifndef __SAMSUNG_H
>>  #define __SAMSUNG_H
>>
>> +/* Maximum UART ports available */
>> +#define MAX_SAMSUNG_UARTS       4
>
> If there is a Samsung SoC having 5 UARTS, we need to update?

Yes, we would need to update the MAX_SAMSUNG_UARTS define for a newer
SoC with 5 uart ports but even without this patch we would have to
modify the SERIAL_SAMSUNG_UARTS symbol to handle 5 ports.
>
> And hmm...maybe we need to keep the useless array sometimes...

Yes, for the 24xx series with 3 uart ports we would.

Regards,
Abhilash
>
>> +
>>  /*
>>   * Driver for Samsung SoC onboard UARTs.
>>   *
>> @@ -38,7 +41,7 @@ struct s3c24xx_uart_info {
>>  struct s3c24xx_serial_drv_data {
>>       struct s3c24xx_uart_info        *info;
>>       struct s3c2410_uartcfg          *def_cfg;
>> -     unsigned int                    fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
>> +     unsigned int                    fifosize[MAX_SAMSUNG_UARTS];
>>  };
>>
>>  struct s3c24xx_uart_port {
>> --
>> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux