Hi, This patch helps in proper description of max77686 regulators in DTS by allowing to control them over GPIO. This allows removal of fixed regulators from DTS which duplicate the description of hardware. The first five patches are cleanups, including board support removal. The whole patchset should be taken at once. Patchset is rebased on next-20141023 AND: 1. ARM: EXYNOS: Call regulator suspend prepare/finish https://lkml.org/lkml/2014/10/20/545 2. regulator: max77686/trats2: Disable some regulators in suspend https://lkml.org/lkml/2014/10/27/280 Best regards, Krzysztof Krzysztof Kozlowski (8): regulator: max77802: Remove support for board files regulator: max77686: Remove support for board files mfd: max77686/802: Remove support for board files regulator: max77686: Make regulator_desc array const regulator: max77686: Initialize opmode explicitly to normal mode regulator: max77686: Add external GPIO control mfd/regulator: dt-bindings: max77686: Document gpio property ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control Documentation/devicetree/bindings/mfd/max77686.txt | 3 + arch/arm/boot/dts/exynos4412-trats2.dts | 25 +--- drivers/mfd/max77686.c | 23 --- drivers/regulator/max77686.c | 158 +++++++++++++++------ drivers/regulator/max77802.c | 44 ++---- include/linux/mfd/max77686-private.h | 1 - include/linux/mfd/max77686.h | 22 --- 7 files changed, 141 insertions(+), 135 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html