Re: [RFC PATCH] drm/exynos: Add DECON driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 22, 2014 at 8:26 PM, Inki Dae <inki.dae@xxxxxxxxxxx> wrote:
>
> Thanks for contribution.
>
> It seems reasonable that you separate device drivers into FIMD and DECON
> because many registers of them have many different offsets and fields.
> However, there may be a good solution that we can combine common sets of
> these drivers later.
Yes, this is the main reason behind sending this as RFC patch.
I want to know what's the best way to do this.
FIMD, 5433 DECON and Exynos7 DECON - all are different.
Also, in Exynos7 DECON-INT is same as DECON-EXT(Mixer).
So, even I am not sure how the driver layouts should be!

> Below are my comments.
>
> Thanks,
> Inki Dae
>
> On 2014년 10월 10일 21:48, Ajay Kumar wrote:
>> This series is based on exynos-drm-next branch of Inki Dae's tree at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
>>
>> DECON(Display and Enhancement Controller) is the new IP
>> in exynos7 SOC for generating video signals using pixel data.
>
> DECON was used since Exynos5430. And is Exynos5433 different from
> Exynos7? If so, could I get the Exynos7 user manual (TRM) for review?
Yes, Exynos5433 DECON is very much different than Exynos7 DECON.
I will see how manual can be arranged.

>>
>> DECON driver can be used to drive 2 different interfaces on Exynos7:
>> DECON-INT(video controller) and DECON-EXT(Mixer for HDMI)
>>
>> The existing FIMD driver code was used as a template to create
>> DECON driver. Only DECON-INT is supported as of now, and
>> DECON-EXT support will be added later.
>>
>> Signed-off-by: Akshu Agrawal <akshu.a@xxxxxxxxxxx>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/video/exynos-decon.txt     |   68 ++
>>  drivers/gpu/drm/exynos/Kconfig                     |   11 +-
>>  drivers/gpu/drm/exynos/Makefile                    |    1 +
>>  drivers/gpu/drm/exynos/exynos_drm_decon.c          | 1086
> ++++++++++++++++++++
>>  drivers/gpu/drm/exynos/exynos_drm_drv.c            |   17 +-
>>  drivers/gpu/drm/exynos/exynos_drm_drv.h            |   11 +
>>  include/video/samsung_decon.h                      |  346 +++++++
>>  7 files changed, 1537 insertions(+), 3 deletions(-)
>>  create mode 100644
> Documentation/devicetree/bindings/video/exynos-decon.txt
>>  create mode 100644 drivers/gpu/drm/exynos/exynos_drm_decon.c
>>  create mode 100644 include/video/samsung_decon.h
>>
>> diff --git a/Documentation/devicetree/bindings/video/exynos-decon.txt
> b/Documentation/devicetree/bindings/video/exynos-decon.txt
>> new file mode 100644
>> index 0000000..e865650
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/exynos-decon.txt
>> @@ -0,0 +1,68 @@
>> +Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
>> +
>> +DECON (Display and Enhancement Controller) is the Display Controller
> for the
>> +Exynos7 series of SoCs which transfers the image data from a video memory
>> +buffer to an external LCD interface.
>> +
>> +Required properties:
>> +- compatible: value should be "samsung,exynos7-decon";
>
> If exynos5433 was just renamed to exynos7 then, it should be one of the
> following:
>         (a) "samsung,exynos5430-decon" for Display and enhancement controller
> IP for Exynos5430
>         (b) "samsung,exynos7" for Display and enhancement controller IP for Exynos7
>
> Or,
>         (a) "samsung,exynos5430-decon" for Display and enhancement controller
> IP for Exynos5430
>
>         (b) "samsung,exynos5433-decon" for Display and enhancement controller
> IP for Exynos5433
>         (c) "samsung,exynos7" for Display and enhancement controller IP for Exynos7
Eventually, we will end up here.

>
>> +
>> +- reg: physical base address and length of the DECON registers set.
>> +
>> +- interrupt-parent: should be the phandle of the decon controller's
>> +             parent interrupt controller.
>> +
>> +- interrupts: should contain a list of all DECON IP block interrupts
> in the
>> +              order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
>> +              format depends on the interrupt controller used.
>> +
>> +- interrupt-names: should contain the interrupt names: "fifo", "vsync",
>> +     "lcd_sys", in the same order as they were listed in the interrupts
>> +        property.
>> +
>> +- pinctrl-0: pin control group to be used for this controller.
>> +
>> +- pinctrl-names: must contain a "default" entry.
>> +
>> +- clocks: must include clock specifiers corresponding to entries in the
>> +         clock-names property.
>> +
>> +- clock-names: list of clock names sorted in the same order as the clocks
>> +               property. Must contain "pclk_decon0", "aclk_decon0",
>> +            "decon0_eclk", "decon0_vclk", "sclk_dsd", aclk_lh_disp0",
>> +            "aclk_disp", "aclk_lh_disp1".
>
> Should DECON driver really control above all clocks? I think it's enough
> that DECON driver controls only lcd and bus clocks, and others could be
> configured by boot-loader or by calling clk_set_rate.
Yes, even I am not sure of the clocks. I have copied these clocks from intrnal
android code.
>> +
>> +Optional Properties:
>> +- samsung,power-domain: a phandle to DECON power domain node.
>
> You are missing many properties,
>         samsung,invert-vden
>         samsung,invert-vclk
These are not present in Exynos7 DECON!

>         display-timings
>         ...
> refer to below document,
> Documentation/devicetree/bindings/video/samsung-fimd.txt
>
>> +
>> +Example:
>> +
>> +SoC specific DT entry:
>> +
>> +     decon@13930000 {
>> +             compatible = "samsung,exynos7-decon";
>> +             interrupt-parent = <&combiner>;
>> +             reg = <0x13930000 0x1000>;
>> +             interrupt-names = "lcd_sys", "vsync", "fifo";
>> +             interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
>> +             clocks = <&clock_disp PCLK_DECON_INT>,
>> +                      <&clock_disp ACLK_DECON_INT>,
>> +                      <&clock_disp SCLK_DECON_INT_ECLK>,
>> +                      <&clock_disp SCLK_DECON_INT_EXTCLKPLL>,
>> +                      <&clock_disp SCLK_DSD>,
>> +                      <&clock_bus0 ACLK_LH_DISP0>,
>> +                      <&clock_disp ACLK_CP_DISP>,
>> +                      <&clock_bus0 ACLK_LH_DISP1>;
>> +             clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
>> +                             "decon0_vclk", "sclk_dsd", "aclk_lh_disp0",
>> +                             "aclk_disp", "aclk_lh_disp1";
>> +             status = "disabled";
>> +     };
>> +
>> +Board specific DT entry:
>> +
>> +     decon@13930000 {
>> +             pinctrl-0 = <&lcd_clk &pwm1_out>;
>> +             pinctrl-names = "default";
>> +             status = "okay";
>> +     };
>> diff --git a/drivers/gpu/drm/exynos/Kconfig
> b/drivers/gpu/drm/exynos/Kconfig
>> index fd1c070..89275ea 100644
>> --- a/drivers/gpu/drm/exynos/Kconfig
>> +++ b/drivers/gpu/drm/exynos/Kconfig
>> @@ -31,6 +31,13 @@ config DRM_EXYNOS_FIMD
>>       help
>>         Choose this option if you want to use Exynos FIMD for DRM.
>>
>> +config DRM_EXYNOS_DECON
>> +     bool "Exynos DRM DECON"
>> +     depends on DRM_EXYNOS
>> +     select FB_MODE_HELPERS
>> +     help
>> +       Choose this option if you want to use Exynos DECON for DRM.
>> +
>>  config DRM_EXYNOS_DPI
>>       bool "EXYNOS DRM parallel output support"
>>       depends on DRM_EXYNOS_FIMD
>> @@ -41,7 +48,7 @@ config DRM_EXYNOS_DPI
>>
>>  config DRM_EXYNOS_DSI
>>       bool "EXYNOS DRM MIPI-DSI driver support"
>> -     depends on DRM_EXYNOS_FIMD
>> +     depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON)
>>       select DRM_MIPI_DSI
>>       select DRM_PANEL
>>       default n
>> @@ -50,7 +57,7 @@ config DRM_EXYNOS_DSI
>>
>>  config DRM_EXYNOS_DP
>>       bool "EXYNOS DRM DP driver support"
>> -     depends on DRM_EXYNOS_FIMD && ARCH_EXYNOS && (DRM_PTN3460=n ||
> DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>> +     depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS_DECON) && ARCH_EXYNOS &&
> (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
>>       default DRM_EXYNOS
>>       select DRM_PANEL
>>       help
>> diff --git a/drivers/gpu/drm/exynos/Makefile
> b/drivers/gpu/drm/exynos/Makefile
>> index 33ae365..c3282ac 100644
>> --- a/drivers/gpu/drm/exynos/Makefile
>> +++ b/drivers/gpu/drm/exynos/Makefile
>> @@ -11,6 +11,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DMABUF) += exynos_drm_dmabuf.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)  += exynos_drm_fimd.o
>> +exynosdrm-$(CONFIG_DRM_EXYNOS_DECON) += exynos_drm_decon.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DPI)   += exynos_drm_dpi.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DSI)   += exynos_drm_dsi.o
>>  exynosdrm-$(CONFIG_DRM_EXYNOS_DP)    += exynos_dp_core.o exynos_dp_reg.o
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_decon.c
> b/drivers/gpu/drm/exynos/exynos_drm_decon.c
>> new file mode 100644
>> index 0000000..5ac4557
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_decon.c
>> @@ -0,0 +1,1086 @@
>> +/* exynos_drm_decon.c
>> + *
>> + * Copyright (C) 2014 Samsung Electronics Co.Ltd
>> + * Authors:
>> + *   Akshu Agarwal <akshu.a@xxxxxxxxxxx>
>> + *   Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute  it and/or
> modify it
>> + * under  the terms of  the GNU General  Public License as published
> by the
>> + * Free Software Foundation;  either version 2 of the  License, or
> (at your
>> + * option) any later version.
>> + *
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/exynos_drm.h>
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/kernel.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +
>> +#include <video/of_display_timing.h>
>> +#include <video/of_videomode.h>
>> +#include <video/samsung_decon.h>
>> +
>> +#include "exynos_drm_crtc.h"
>> +#include "exynos_drm_drv.h"
>> +#include "exynos_drm_fbdev.h"
>> +#include "exynos_drm_iommu.h"
>> +
>> +/*
>> + * DECON stands for Display and Enhancement controller, and
>> + * as a display controller, it transfers contents drawn on memory
>> + * to a LCD Panel through Display Interfaces such as RGB or
>> + * CPU Interface.
>> + */
>> +
>> +#define DECON_DEFAULT_FRAMERATE 60
>> +#define RESET_TIMEOUT 200
>> +#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
>> +
>> +#define WINDOWS_NR   2
>
> I know that DECON supports five overlays.
Exynos7 supports 7 overlays: 3 DMA channels and 4 local path.
Out of 3, one is secured DMA. so, we can in general use only 2 DMA layers.

>> +
>> +#define get_decon_manager(mgr)
> platform_get_drvdata(to_platform_device(dev))
>> +
>> +struct decon_win_data {
>> +     unsigned int            ovl_x;
>> +     unsigned int            ovl_y;
>> +     unsigned int            offset_x;
>> +     unsigned int            offset_y;
>> +     unsigned int            ovl_width;
>> +     unsigned int            ovl_height;
>> +     unsigned int            fb_width;
>> +     unsigned int            fb_height;
>> +     unsigned int            bpp;
>> +     unsigned int            pixel_format;
>> +     dma_addr_t              dma_addr;
>> +     bool                    enabled;
>> +     bool                    resume;
>> +};
>> +
>> +struct decon_context {
>> +     struct device                   *dev;
>> +     struct drm_device               *drm_dev;
>> +     struct clk                      *pclk;
>> +     struct clk                      *aclk;
>> +     struct clk                      *eclk;
>> +     struct clk                      *vclk;
>> +     struct clk                      *dsd;
>> +     struct clk                      *lh_disp1;
>> +     struct clk                      *aclk_disp;
>> +     struct clk                      *lh_disp0;
>> +     void __iomem                    *regs;
>> +     struct drm_display_mode         mode;
>> +     struct decon_win_data           win_data[WINDOWS_NR];
>> +     unsigned int                    default_win;
>> +     unsigned long                   irq_flags;
>> +     u32                             vidcon1;
>> +     bool                            suspended;
>> +     int                             pipe;
>> +     wait_queue_head_t               wait_vsync_queue;
>> +     atomic_t                        wait_vsync_event;
>> +
>> +     struct exynos_drm_panel_info panel;
>> +};
>> +
>> +static const struct of_device_id decon_driver_dt_match[] = {
>> +     { .compatible = "samsung,exynos7-decon"},
>
> WARNING: DT compatible string "samsung,exynos7-decon" appears
> un-documented -- check ./Documentation/devicetree/bindings/
>
>> +     {},
>> +};
>> +MODULE_DEVICE_TABLE(of, decon_driver_dt_match);
>> +
>> +static void decon_wait_for_vblank(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +
>> +     if (ctx->suspended)
>> +             return;
>> +
>> +     atomic_set(&ctx->wait_vsync_event, 1);
>> +
>> +     /*
>> +      * wait for decon to signal VSYNC interrupt or return after
>> +      * timeout which is set to 50ms (refresh rate of 20).
>> +      */
>> +     if (!wait_event_timeout(ctx->wait_vsync_queue,
>> +                             !atomic_read(&ctx->wait_vsync_event),
>> +                             HZ/20))
>> +             DRM_DEBUG_KMS("vblank wait timed out.\n");
>> +}
>> +
>> +static void decon_clear_channel(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     int win, ch_enabled = 0;
>> +
>> +     DRM_DEBUG_KMS("%s\n", __FILE__);
>> +
>> +     /* Check if any channel is enabled. */
>> +     for (win = 0; win < WINDOWS_NR; win++) {
>> +             u32 val = readl(ctx->regs + WINCON(win));
>> +
>> +             if (val & WINCONx_ENWIN) {
>> +                     val &= ~WINCONx_ENWIN;
>> +                     writel(val, ctx->regs + WINCON(win));
>> +                     ch_enabled = 1;
>> +             }
>> +     }
>> +
>> +     /* Wait for vsync, as disable channel takes effect at next vsync */
>> +     if (ch_enabled) {
>> +             unsigned int state = ctx->suspended;
>> +
>> +             ctx->suspended = 0;
>> +             decon_wait_for_vblank(mgr);
>> +             ctx->suspended = state;
>> +     }
>> +}
>> +
>> +static int decon_mgr_initialize(struct exynos_drm_manager *mgr,
>> +                     struct drm_device *drm_dev)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct exynos_drm_private *priv = drm_dev->dev_private;
>> +
>> +     mgr->drm_dev = ctx->drm_dev = drm_dev;
>> +     mgr->pipe = ctx->pipe = priv->pipe++;
>> +
>> +     /* attach this sub driver to iommu mapping if supported. */
>> +     if (is_drm_iommu_supported(ctx->drm_dev)) {
>> +             /*
>> +              * If any channel is already active, iommu will throw
>> +              * a PAGE FAULT when enabled. So clear any channel if enabled.
>> +              */
>> +             decon_clear_channel(mgr);
>> +             drm_iommu_attach_device(ctx->drm_dev, ctx->dev);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static void decon_mgr_remove(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +
>> +     /* detach this sub driver from iommu mapping if supported. */
>> +     if (is_drm_iommu_supported(ctx->drm_dev))
>> +             drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
>> +}
>> +
>> +static u32 decon_calc_clkdiv(struct decon_context *ctx,
>> +             const struct drm_display_mode *mode)
>> +{
>> +     unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh;
>> +     u32 clkdiv;
>> +
>> +     /* Find the clock divider value that gets us closest to ideal_clk */
>> +     clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->vclk), ideal_clk);
>> +
>> +     return (clkdiv < 0x100) ? clkdiv : 0xff;
>> +}
>> +
>> +static bool decon_mode_fixup(struct exynos_drm_manager *mgr,
>> +             const struct drm_display_mode *mode,
>> +             struct drm_display_mode *adjusted_mode)
>> +{
>> +     if (adjusted_mode->vrefresh == 0)
>> +             adjusted_mode->vrefresh = DECON_DEFAULT_FRAMERATE;
>> +
>> +     return true;
>> +}
>> +
>> +static void decon_mode_set(struct exynos_drm_manager *mgr,
>> +             const struct drm_display_mode *in_mode)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +
>> +     drm_mode_copy(&ctx->mode, in_mode);
>> +}
>> +
>> +static void decon_commit(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct drm_display_mode *mode = &ctx->mode;
>> +     u32 val, clkdiv;
>> +     int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
>> +
>> +     if (ctx->suspended)
>> +             return;
>> +
>> +     /* nothing to do if we haven't set the mode yet */
>> +     if (mode->htotal == 0 || mode->vtotal == 0)
>> +             return;
>> +
>> +      /* setup vertical timing values. */
>> +     vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
>> +     vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
>> +     vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
>> +
>> +     val = VIDTCON0_VBPD(vbpd - 1) | VIDTCON0_VFPD(vfpd - 1);
>> +     writel(val, ctx->regs + VIDTCON0);
>
> Check VIDTCON0~3 registers. These registers of Exynos5433 and Exynos5430
> have different offsets so you would need to consider the differences.
Do I need to add support fofr Exynos5433 DECON also?
I am not sure if I have a test setup!

>> +
>> +     val = VIDTCON1_VSPW(vsync_len - 1);
>> +     writel(val, ctx->regs + VIDTCON1);
>
> Ditto
>
>> +
>> +     /* setup horizontal timing values.  */
>> +     hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
>> +     hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
>> +     hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
>> +
>> +     /* setup horizontal timing values.  */
>> +     val = VIDTCON2_HBPD(hbpd - 1) | VIDTCON2_HFPD(hfpd - 1);
>> +     writel(val, ctx->regs + VIDTCON2);
>
> Ditto
>
>> +
>> +     val = VIDTCON3_HSPW(hsync_len - 1);
>> +     writel(val, ctx->regs + VIDTCON3);
>
> Ditto
>
>> +
>> +     /* setup horizontal and vertical display size. */
>> +     val = VIDTCON4_LINEVAL(mode->vdisplay - 1) |
>> +            VIDTCON4_HOZVAL(mode->hdisplay - 1);
>> +     writel(val, ctx->regs + VIDTCON4);
>> +
>> +     writel(mode->vdisplay - 1, ctx->regs + LINECNT_OP_THRESHOLD);
>> +
>> +     /*
>> +      * fields of register with prefix '_F' would be updated
>> +      * at vsync(same as dma start)
>> +      */
>> +     val = VIDCON0_ENVID | VIDCON0_ENVID_F;
>> +     writel(val, ctx->regs + VIDCON0);
>> +
>> +     clkdiv = decon_calc_clkdiv(ctx, mode);
>> +     if (clkdiv > 1) {
>> +             val = VCLKCON1_CLKVAL_NUM_VCLK(clkdiv - 1);
>> +             writel(val, ctx->regs + VCLKCON1);
>> +             writel(val, ctx->regs + VCLKCON2);
>> +     }
>> +
>> +     val = readl(ctx->regs + DECON_UPDATE);
>> +     val |= DECON_UPDATE_STANDALONE_F;
>> +     writel(val, ctx->regs + DECON_UPDATE);
>> +}
>> +
>> +static int decon_enable_vblank(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     u32 val;
>> +
>> +     if (ctx->suspended)
>> +             return -EPERM;
>> +
>> +     if (!test_and_set_bit(0, &ctx->irq_flags)) {
>> +             val = readl(ctx->regs + VIDINTCON0);
>> +
>> +             val |= VIDINTCON0_INT_ENABLE;
>> +             val |= VIDINTCON0_INT_FRAME;
>> +
>> +             val &= ~VIDINTCON0_FRAMESEL0_MASK;
>> +             val |= VIDINTCON0_FRAMESEL0_VSYNC;
>> +
>> +             writel(val, ctx->regs + VIDINTCON0);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static void decon_disable_vblank(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     u32 val;
>> +
>> +     if (ctx->suspended)
>> +             return;
>> +
>> +     if (test_and_clear_bit(0, &ctx->irq_flags)) {
>> +             val = readl(ctx->regs + VIDINTCON0);
>> +
>> +             val &= ~VIDINTCON0_INT_FRAME;
>> +             val &= ~VIDINTCON0_INT_ENABLE;
>> +
>> +             writel(val, ctx->regs + VIDINTCON0);
>> +     }
>> +}
>> +
>> +static void decon_win_mode_set(struct exynos_drm_manager *mgr,
>> +                     struct exynos_drm_overlay *overlay)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int win, padding;
>> +
>> +     if (!overlay) {
>> +             DRM_ERROR("overlay is NULL\n");
>> +             return;
>> +     }
>> +
>> +     win = overlay->zpos;
>> +     if (win == DEFAULT_ZPOS)
>> +             win = ctx->default_win;
>> +
>> +     if (win < 0 || win >= WINDOWS_NR)
>> +             return;
>> +
>> +
>> +     win_data = &ctx->win_data[win];
>> +
>> +     padding = (overlay->pitch / (overlay->bpp >> 3)) - overlay->fb_width;
>> +     win_data->offset_x = overlay->fb_x;
>> +     win_data->offset_y = overlay->fb_y;
>> +     win_data->fb_width = overlay->fb_width + padding;
>> +     win_data->fb_height = overlay->fb_height;
>> +     win_data->ovl_x = overlay->crtc_x;
>> +     win_data->ovl_y = overlay->crtc_y;
>> +     win_data->ovl_width = overlay->crtc_width;
>> +     win_data->ovl_height = overlay->crtc_height;
>> +     win_data->dma_addr = overlay->dma_addr[0];
>> +     win_data->bpp = overlay->bpp;
>> +     win_data->pixel_format = overlay->pixel_format;
>> +
>> +     DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n",
>> +                     win_data->offset_x, win_data->offset_y);
>> +     DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> +                     win_data->ovl_width, win_data->ovl_height);
>> +     DRM_DEBUG_KMS("paddr = 0x%lx\n", (unsigned long)win_data->dma_addr);
>> +     DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n",
>> +                     overlay->fb_width, overlay->crtc_width);
>> +}
>> +
>> +static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned
> int win)
>> +{
>> +     struct decon_win_data *win_data = &ctx->win_data[win];
>> +     unsigned long val;
>> +
>> +     val = readl(ctx->regs + WINCON(win));
>> +     val &= ~WINCONx_BPPMODE_MASK;
>> +
>> +     switch (win_data->pixel_format) {
>> +     case DRM_FORMAT_RGB565:
>> +             val |= WINCONx_BPPMODE_16BPP_565;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_XRGB8888:
>> +             val |= WINCONx_BPPMODE_24BPP_xRGB;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_XBGR8888:
>> +             val |= WINCONx_BPPMODE_24BPP_xBGR;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_RGBX8888:
>> +             val |= WINCONx_BPPMODE_24BPP_RGBx;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_BGRX8888:
>> +             val |= WINCONx_BPPMODE_24BPP_BGRx;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_ARGB8888:
>> +             val |= WINCONx_BPPMODE_32BPP_ARGB | WINCONx_BLD_PIX |
>> +                     WINCONx_ALPHA_SEL;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_ABGR8888:
>> +             val |= WINCONx_BPPMODE_32BPP_ABGR | WINCONx_BLD_PIX |
>> +                     WINCONx_ALPHA_SEL;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_RGBA8888:
>> +             val |= WINCONx_BPPMODE_32BPP_RGBA | WINCONx_BLD_PIX |
>> +                     WINCONx_ALPHA_SEL;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     case DRM_FORMAT_BGRA8888:
>> +             val |= WINCONx_BPPMODE_32BPP_BGRA | WINCONx_BLD_PIX |
>> +                     WINCONx_ALPHA_SEL;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     default:
>> +             DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
>> +
>> +             val |= WINCONx_BPPMODE_24BPP_xRGB;
>> +             val |= WINCONx_BURSTLEN_16WORD;
>> +             break;
>> +     }
>> +
>> +     DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp);
>> +
>> +     /*
>> +      * In case of exynos, setting dma-burst to 16Word causes permanent
>> +      * tearing for very small buffers, e.g. cursor buffer. Burst Mode
>> +      * switching which is based on overlay size is not recommended as
>> +      * overlay size varies alot towards the end of the screen and rapid
>
> WARNING: 'alot' may be misspelled - perhaps 'a lot'?
>
>> +      * movement causes unstable DMA which results into iommu crash/tear.
>> +      */
>> +
>> +     if (win_data->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
>> +             val &= ~WINCONx_BURSTLEN_MASK;
>> +             val |= WINCONx_BURSTLEN_8WORD;
>> +     }
>> +
>> +     writel(val, ctx->regs + WINCON(win));
>> +}
>> +
>> +static void decon_win_set_colkey(struct decon_context *ctx, unsigned
> int win)
>> +{
>> +     unsigned int keycon0 = 0, keycon1 = 0;
>> +
>> +     keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
>> +                     WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
>> +
>> +     keycon1 = WxKEYCON1_COLVAL(0xffffffff);
>> +
>> +     writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
>> +     writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
>> +}
>> +
>> +/**
>> + * shadow_protect_win() - disable updating values from shadow
> registers at vsync
>> + *
>> + * @win: window to protect registers for
>> + * @protect: 1 to protect (disable updates)
>> + */
>> +static void decon_shadow_protect_win(struct decon_context *ctx,
>> +                                                     int win, bool protect)
>> +{
>> +     u32 reg, bits, val;
>> +
>> +     reg = SHADOWCON;
>> +     bits = SHADOWCON_WINx_PROTECT(win);
>> +
>> +     val = readl(ctx->regs + reg);
>> +     if (protect)
>> +             val |= bits;
>> +     else
>> +             val &= ~bits;
>> +     writel(val, ctx->regs + reg);
>> +}
>> +
>> +static void decon_win_commit(struct exynos_drm_manager *mgr, int zpos)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int win = zpos;
>> +     unsigned long val, alpha, blendeq;
>> +     unsigned int last_x;
>> +     unsigned int last_y;
>> +
>> +     if (ctx->suspended)
>> +             return;
>> +
>> +     if (win == DEFAULT_ZPOS)
>> +             win = ctx->default_win;
>> +
>> +     if (win < 0 || win >= WINDOWS_NR)
>> +             return;
>> +
>> +     win_data = &ctx->win_data[win];
>> +
>> +     /* If suspended, enable this on resume */
>> +     if (ctx->suspended) {
>> +             win_data->resume = true;
>> +             return;
>> +     }
>> +
>> +     /*
>> +      * SHADOWCON/PRTCON register is used for enabling timing.
>> +      *
>> +      * for example, once only width value of a register is set,
>> +      * if the dma is started then decon hardware could malfunction so
>> +      * with protect window setting, the register fields with prefix '_F'
>> +      * wouldn't be updated at vsync also but updated once unprotect window
>> +      * is set.
>> +      */
>> +
>> +     /* protect windows */
>> +     decon_shadow_protect_win(ctx, win, true);
>> +
>> +     /* buffer start address */
>> +     val = (unsigned long)win_data->dma_addr;
>> +     writel(val, ctx->regs + VIDW_BUF_START(win));
>> +
>> +     /* buffer size */
>> +     writel(win_data->fb_width, ctx->regs + VIDW_WHOLE_X(win));
>> +     writel(win_data->fb_height, ctx->regs + VIDW_WHOLE_Y(win));
>> +
>> +     /* offset from the start of the buffer read */
>> +     writel(win_data->offset_x, ctx->regs + VIDW_OFFSET_X(win));
>> +     writel(win_data->offset_y, ctx->regs + VIDW_OFFSET_Y(win));
>> +
>> +     DRM_DEBUG_KMS("start addr = 0x%lx\n",
>> +                     (unsigned long)win_data->dma_addr);
>> +     DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> +                     win_data->ovl_width, win_data->ovl_height);
>> +
>> +     /* OSD position */
>> +     val = VIDOSDxA_TOPLEFT_X(win_data->ovl_x) |
>> +             VIDOSDxA_TOPLEFT_Y(win_data->ovl_y);
>> +     writel(val, ctx->regs + VIDOSD_A(win));
>> +
>> +     last_x = win_data->ovl_x + win_data->ovl_width;
>> +     if (last_x)
>> +             last_x--;
>> +     last_y = win_data->ovl_y + win_data->ovl_height;
>> +     if (last_y)
>> +             last_y--;
>> +
>> +     val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y);
>> +
>> +     writel(val, ctx->regs + VIDOSD_B(win));
>> +
>> +     DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
>> +                     win_data->ovl_x, win_data->ovl_y, last_x, last_y);
>> +
>> +             /* OSD alpha */
>> +             alpha = VIDOSDxC_ALPHA0_R_F(0x0) |
>> +                             VIDOSDxC_ALPHA0_G_F(0x0) |
>> +                             VIDOSDxC_ALPHA0_B_F(0x0);
>> +
>> +             writel(alpha, ctx->regs + VIDOSD_C(win));
>> +
>> +             alpha = VIDOSDxD_ALPHA1_R_F(0xff) |
>> +                             VIDOSDxD_ALPHA1_G_F(0xff) |
>> +                             VIDOSDxD_ALPHA1_B_F(0xff);
>> +
>> +             writel(alpha, ctx->regs + VIDOSD_D(win));
>> +
>> +     if (win != 0) {
>> +             blendeq = BLENDE_A_FUNC(BLENDE_COEF_ONE) |
>> +                     BLENDE_B_FUNC(BLENDE_COEF_ZERO) |
>> +                     BLENDE_P_FUNC(BLENDE_COEF_ZERO) |
>> +                     BLENDE_Q_FUNC(BLENDE_COEF_ZERO);
>> +
>> +             writel(blendeq, ctx->regs + BLENDE(win - 1));
>> +     }
>> +
>> +     decon_win_set_pixfmt(ctx, win);
>> +
>> +     /* hardware window 0 doesn't support color key. */
>> +     if (win != 0)
>> +             decon_win_set_colkey(ctx, win);
>> +
>> +     /* wincon */
>> +     val = readl(ctx->regs + WINCON(win));
>> +     val |= WINCONx_TRIPLE_BUF_MODE;
>> +     val |= WINCONx_ENWIN;
>> +     writel(val, ctx->regs + WINCON(win));
>> +
>> +     /* Enable DMA channel and unprotect windows */
>> +     decon_shadow_protect_win(ctx, win, false);
>> +
>> +     val = readl(ctx->regs + DECON_UPDATE);
>> +     val |= DECON_UPDATE_STANDALONE_F;
>> +     writel(val, ctx->regs + DECON_UPDATE);
>> +
>> +     win_data->enabled = true;
>> +}
>> +
>> +static void decon_win_disable(struct exynos_drm_manager *mgr, int zpos)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int win = zpos;
>> +     u32 val;
>> +
>> +     if (win == DEFAULT_ZPOS)
>> +             win = ctx->default_win;
>> +
>> +     if (win < 0 || win >= WINDOWS_NR)
>> +             return;
>> +
>> +     win_data = &ctx->win_data[win];
>> +
>> +     if (ctx->suspended) {
>> +             /* do not resume this window*/
>> +             win_data->resume = false;
>> +             return;
>> +     }
>> +
>> +     /* protect windows */
>> +     decon_shadow_protect_win(ctx, win, true);
>> +
>> +     /* wincon */
>> +     val = readl(ctx->regs + WINCON(win));
>> +     val &= ~WINCONx_ENWIN;
>> +     writel(val, ctx->regs + WINCON(win));
>> +
>> +     decon_shadow_protect_win(ctx, win, false);
>> +
>> +     win_data->enabled = false;
>> +}
>> +
>> +static void decon_window_suspend(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int i;
>> +
>> +     for (i = 0; i < WINDOWS_NR; i++) {
>> +             win_data = &ctx->win_data[i];
>> +             win_data->resume = win_data->enabled;
>> +             if (win_data->enabled)
>> +                     decon_win_disable(mgr, i);
>> +     }
>> +     decon_wait_for_vblank(mgr);
>> +}
>> +
>> +static void decon_window_resume(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int i;
>> +
>> +     for (i = 0; i < WINDOWS_NR; i++) {
>> +             win_data = &ctx->win_data[i];
>> +             win_data->enabled = win_data->resume;
>> +             win_data->resume = false;
>> +     }
>> +}
>> +
>> +static void decon_apply(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     struct decon_win_data *win_data;
>> +     int i;
>> +
>> +     for (i = 0; i < WINDOWS_NR; i++) {
>> +             win_data = &ctx->win_data[i];
>> +             if (win_data->enabled)
>> +                     decon_win_commit(mgr, i);
>> +             else
>> +                     decon_win_disable(mgr, i);
>> +     }
>> +
>> +     decon_commit(mgr);
>> +}
>> +
>> +static int decon_reg_reset(struct decon_context *ctx)
>> +{
>> +     int tries = RESET_TIMEOUT;
>> +
>> +     writel(VIDCON0_SWRESET, ctx->regs + VIDCON0);
>> +
>> +     while (tries) {
>> +             if (!(readl(ctx->regs + VIDCON0) & VIDCON0_SWRESET))
>> +                     break;
>> +             udelay(10);
>> +             tries--;
>> +     }
>> +
>> +     if (!tries) {
>> +             DRM_ERROR("Failed to reset decon\n");
>> +             return -EBUSY;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static void decon_cmu_enable(struct decon_context *ctx)
>> +{
>> +     writel(~DECON_CMU_ALL_CLKGATE_ENABLE, ctx->regs + DECON_CMU);
>> +}
>> +
>> +static void decon_blend_alpha_bits(struct decon_context *ctx)
>> +{
>> +     writel(BLENDCON_NEW_8BIT_ALPHA_VALUE, ctx->regs + BLENDCON);
>> +}
>> +
>> +static void decon_set_vidout(struct decon_context *ctx)
>> +{
>> +     writel(VIDOUTCON0_LCD_ON | VIDOUTCON0_RGBIF, ctx->regs + VIDOUTCON0);
>> +}
>> +
>> +static void decon_set_crc(struct decon_context *ctx)
>> +{
>> +     u32 val = readl(ctx->regs + CRCCTRL);
>> +
>> +     writel(val & ~(CRCCTRL_CRCCLKEN | CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F),
>> +                                                     ctx->regs + CRCCTRL);
>> +}
>> +
>> +static void decon_set_clkval(struct decon_context *ctx)
>> +{
>> +     writel(VCLKCON0_CLKVALUP | VCLKCON0_VCLKFREE, ctx->regs + VCLKCON0);
>> +}
>> +
>> +static void decon_set_fixvclk(struct decon_context *ctx)
>> +{
>> +     writel(ctx->vidcon1, ctx->regs + VIDCON1(0));
>> +}
>> +
>> +static int decon_poweron(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +     int ret;
>> +
>> +     if (!ctx->suspended)
>> +             return 0;
>> +
>> +     ctx->suspended = false;
>> +
>> +     pm_runtime_get_sync(ctx->dev);
>> +
>> +     ret = clk_prepare_enable(ctx->pclk);
>> +     if (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
>> +             goto pclk_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->aclk);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
>> +             goto aclk_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->eclk);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
>> +             goto eclk_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->vclk);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
>> +             goto vclk_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->dsd);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the dsd [%d]\n", ret);
>> +             goto dsd_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->lh_disp1);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the lh_disp1 [%d]\n", ret);
>> +             goto lh_disp1_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->aclk_disp);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the aclk_disp [%d]\n", ret);
>> +             goto aclk_disp_err;
>> +     }
>> +
>> +     ret = clk_prepare_enable(ctx->lh_disp0);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to prepare_enable the lh_disp0 [%d]\n", ret);
>> +             goto lh_disp0_err;
>> +     }
>> +
>> +     ret = decon_reg_reset(mgr->ctx);
>> +     if  (ret < 0) {
>> +             DRM_ERROR("Failed to reset decon [%d]\n", ret);
>> +             goto lh_disp0_err;
>> +     }
>> +
>> +     decon_cmu_enable(mgr->ctx);
>> +     decon_blend_alpha_bits(mgr->ctx);
>> +     decon_set_vidout(mgr->ctx);
>> +     decon_set_crc(mgr->ctx);
>> +     decon_set_fixvclk(mgr->ctx);
>> +     decon_set_clkval(mgr->ctx);
>> +
>> +     /* if vblank was enabled status, enable it again. */
>> +     if (test_and_clear_bit(0, &ctx->irq_flags)) {
>> +             ret = decon_enable_vblank(mgr);
>> +             if (ret) {
>> +                     DRM_ERROR("Failed to re-enable vblank [%d]\n", ret);
>> +                     goto enable_vblank_err;
>> +             }
>> +     }
>> +
>> +     decon_window_resume(mgr);
>> +
>> +     decon_apply(mgr);
>> +
>> +     return 0;
>> +
>> +enable_vblank_err:
>> +     clk_disable_unprepare(ctx->lh_disp0);
>> +lh_disp0_err:
>> +     clk_disable_unprepare(ctx->aclk_disp);
>> +aclk_disp_err:
>> +     clk_disable_unprepare(ctx->lh_disp1);
>> +lh_disp1_err:
>> +     clk_disable_unprepare(ctx->dsd);
>> +dsd_err:
>> +     clk_disable_unprepare(ctx->vclk);
>> +vclk_err:
>> +     clk_disable_unprepare(ctx->eclk);
>> +eclk_err:
>> +     clk_disable_unprepare(ctx->aclk);
>> +aclk_err:
>> +     clk_disable_unprepare(ctx->pclk);
>> +pclk_err:
>> +     ctx->suspended = true;
>> +     return ret;
>> +}
>> +
>> +static int decon_poweroff(struct exynos_drm_manager *mgr)
>> +{
>> +     struct decon_context *ctx = mgr->ctx;
>> +
>> +     if (ctx->suspended)
>> +             return 0;
>> +
>> +     /*
>> +      * We need to make sure that all windows are disabled before we
>> +      * suspend that connector. Otherwise we might try to scan from
>> +      * a destroyed buffer later.
>> +      */
>> +     decon_window_suspend(mgr);
>> +
>> +     clk_disable_unprepare(ctx->pclk);
>> +     clk_disable_unprepare(ctx->aclk);
>> +     clk_disable_unprepare(ctx->eclk);
>> +     clk_disable_unprepare(ctx->vclk);
>> +     clk_disable_unprepare(ctx->dsd);
>> +     clk_disable_unprepare(ctx->lh_disp1);
>> +     clk_disable_unprepare(ctx->aclk_disp);
>> +     clk_disable_unprepare(ctx->lh_disp0);
>> +
>> +     pm_runtime_put_sync(ctx->dev);
>> +
>> +     ctx->suspended = true;
>> +     return 0;
>> +}
>> +
>> +static void decon_dpms(struct exynos_drm_manager *mgr, int mode)
>> +{
>> +     DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode);
>> +
>> +     switch (mode) {
>> +     case DRM_MODE_DPMS_ON:
>> +             decon_poweron(mgr);
>> +             break;
>> +     case DRM_MODE_DPMS_STANDBY:
>> +     case DRM_MODE_DPMS_SUSPEND:
>> +     case DRM_MODE_DPMS_OFF:
>> +             decon_poweroff(mgr);
>> +             break;
>> +     default:
>> +             DRM_DEBUG_KMS("unspecified mode %d\n", mode);
>> +             break;
>> +     }
>> +}
>> +
>> +static struct exynos_drm_manager_ops decon_manager_ops = {
>> +     .dpms = decon_dpms,
>> +     .mode_fixup = decon_mode_fixup,
>> +     .mode_set = decon_mode_set,
>> +     .commit = decon_commit,
>> +     .enable_vblank = decon_enable_vblank,
>> +     .disable_vblank = decon_disable_vblank,
>> +     .wait_for_vblank = decon_wait_for_vblank,
>> +     .win_mode_set = decon_win_mode_set,
>> +     .win_commit = decon_win_commit,
>> +     .win_disable = decon_win_disable,
>> +};
>> +
>> +static struct exynos_drm_manager decon_manager = {
>> +     .type = EXYNOS_DISPLAY_TYPE_LCD,
>> +     .ops = &decon_manager_ops,
>> +};
>> +
>> +static irqreturn_t decon_irq_handler(int irq, void *dev_id)
>> +{
>> +     struct decon_context *ctx = (struct decon_context *)dev_id;
>> +     u32 val;
>> +
>> +     val = readl(ctx->regs + VIDINTCON1);
>> +
>> +     if (val & VIDINTCON1_INT_FRAME)
>> +             /* VSYNC interrupt */
>> +             writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1);
>> +
>> +     /* check the crtc is detached already from encoder */
>> +     if (ctx->pipe < 0 || !ctx->drm_dev)
>> +             goto out;
>> +
>> +     drm_handle_vblank(ctx->drm_dev, ctx->pipe);
>> +     exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe);
>> +
>> +     /* set wait vsync event to zero and wake up queue. */
>> +     if (atomic_read(&ctx->wait_vsync_event)) {
>> +             atomic_set(&ctx->wait_vsync_event, 0);
>> +             wake_up(&ctx->wait_vsync_queue);
>> +     }
>> +out:
>> +     return IRQ_HANDLED;
>> +}
>> +
>> +static int decon_bind(struct device *dev, struct device *master, void
> *data)
>> +{
>> +     struct drm_device *drm_dev = data;
>> +
>> +     decon_mgr_initialize(&decon_manager, drm_dev);
>> +     exynos_drm_crtc_create(&decon_manager);
>> +
>> +     return 0;
>> +
>> +}
>> +
>> +static void decon_unbind(struct device *dev, struct device *master,
>> +                     void *data)
>> +{
>> +     struct exynos_drm_manager *mgr = dev_get_drvdata(dev);
>> +
>> +     decon_dpms(mgr, DRM_MODE_DPMS_OFF);
>> +     decon_mgr_remove(mgr);
>> +}
>> +
>> +static const struct component_ops decon_component_ops = {
>> +     .bind   = decon_bind,
>> +     .unbind = decon_unbind,
>> +};
>> +
>> +static int decon_probe(struct platform_device *pdev)
>> +{
>> +     struct device *dev = &pdev->dev;
>> +     struct decon_context *ctx;
>> +     struct resource *res;
>> +     int ret = -EINVAL;
>> +
>> +     ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC,
>> +                                     decon_manager.type);
>> +     if (ret)
>> +             return ret;
>> +
>> +     if (!dev->of_node) {
>> +             ret = -ENODEV;
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +     if (!ctx) {
>> +             ret = -ENOMEM;
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->dev = dev;
>> +     ctx->suspended = true;
>> +
>
> You would also need to consider to configure DSD_CFG_MUX register using
> mfd/syscon interfaces.
I have not configured it till now for Exynos7, but for me display works fine!

>> +     ctx->pclk = devm_clk_get(dev, "pclk_decon0");
>> +     if (IS_ERR(ctx->pclk)) {
>> +             dev_err(dev, "failed to get bus clock\n");
>> +             ret = PTR_ERR(ctx->pclk);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->aclk = devm_clk_get(dev, "aclk_decon0");
>> +     if (IS_ERR(ctx->aclk)) {
>> +             dev_err(dev, "failed to get aclock\n");
>> +             ret = PTR_ERR(ctx->aclk);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->eclk = devm_clk_get(dev, "decon0_eclk");
>> +     if (IS_ERR(ctx->eclk)) {
>> +             dev_err(dev, "failed to get eclock\n");
>> +             ret = PTR_ERR(ctx->eclk);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->vclk = devm_clk_get(dev, "decon0_vclk");
>> +     if (IS_ERR(ctx->vclk)) {
>> +             dev_err(dev, "failed to get vclock\n");
>> +             ret = PTR_ERR(ctx->vclk);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->dsd = devm_clk_get(dev, "sclk_dsd");
>> +     if (IS_ERR(ctx->dsd)) {
>> +             dev_err(dev, "failed to get dsd clock\n");
>> +             ret = PTR_ERR(ctx->dsd);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->lh_disp1 = devm_clk_get(dev, "aclk_lh_disp1");
>> +     if (IS_ERR(ctx->lh_disp1)) {
>> +             dev_err(dev, "failed to get lh_disp1 clock\n");
>> +             ret = PTR_ERR(ctx->lh_disp1);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->aclk_disp = devm_clk_get(dev, "aclk_disp");
>> +     if (IS_ERR(ctx->aclk_disp)) {
>> +             dev_err(dev, "failed to get aclk_disp clock\n");
>> +             ret = PTR_ERR(ctx->aclk_disp);
>> +             goto err_del_component;
>> +     }
>> +
>> +     ctx->lh_disp0 = devm_clk_get(dev, "aclk_lh_disp0");
>> +     if (IS_ERR(ctx->lh_disp0)) {
>> +             dev_err(dev, "failed to get lh_disp0 clock\n");
>> +             ret = PTR_ERR(ctx->lh_disp0);
>> +             goto err_del_component;
>> +     }
>> +
>> +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +
>> +     ctx->regs = devm_ioremap_resource(dev, res);
>> +     if (IS_ERR(ctx->regs)) {
>> +             ret = PTR_ERR(ctx->regs);
>> +             goto err_del_component;
>> +     }
>> +
>> +     res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "vsync");
>> +     if (!res) {
>> +             dev_err(dev, "irq request failed.\n");
>> +             ret = -ENXIO;
>> +             goto err_del_component;
>> +     }
>> +
>> +     ret = devm_request_irq(dev, res->start, decon_irq_handler,
>> +                                                     0, "drm_decon", ctx);
>> +     if (ret) {
>> +             dev_err(dev, "irq request failed.\n");
>> +             goto err_del_component;
>> +     }
>> +
>> +     init_waitqueue_head(&ctx->wait_vsync_queue);
>> +     atomic_set(&ctx->wait_vsync_event, 0);
>> +
>> +     platform_set_drvdata(pdev, &decon_manager);
>> +
>> +     decon_manager.ctx = ctx;
>> +
>> +     pm_runtime_enable(&pdev->dev);
>> +
>> +     ret = component_add(&pdev->dev, &decon_component_ops);
>> +     if (ret)
>> +             goto err_disable_pm_runtime;
>> +
>> +     return ret;
>> +
>> +err_disable_pm_runtime:
>> +     pm_runtime_disable(&pdev->dev);
>> +
>> +err_del_component:
>> +     exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
>> +     return ret;
>> +}
>> +
>> +static int decon_remove(struct platform_device *pdev)
>> +{
>> +     pm_runtime_disable(&pdev->dev);
>> +
>> +     component_del(&pdev->dev, &decon_component_ops);
>> +     exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
>> +
>> +     return 0;
>> +}
>> +
>> +struct platform_driver decon_driver = {
>> +     .probe          = decon_probe,
>> +     .remove         = decon_remove,
>> +     .driver         = {
>> +             .name   = "exynos-decon",
>> +             .owner  = THIS_MODULE,
>> +             .of_match_table = decon_driver_dt_match,
>> +     },
>> +};
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index 443a206..44bdc42 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -557,10 +557,16 @@ static int exynos_drm_platform_probe(struct
> platform_device *pdev)
>>               return ret;
>>  #endif
>>
>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>> +     ret = platform_driver_register(&decon_driver);
>> +     if (ret < 0)
>> +             goto err_unregister_fimd_drv;
>> +#endif
>> +
>>  #ifdef CONFIG_DRM_EXYNOS_DP
>>       ret = platform_driver_register(&dp_driver);
>>       if (ret < 0)
>> -             goto err_unregister_fimd_drv;
>> +             goto err_unregister_decon_drv;
>>  #endif
>>
>>  #ifdef CONFIG_DRM_EXYNOS_DSI
>> @@ -668,6 +674,11 @@ err_unregister_dp_drv:
>>
>>  #ifdef CONFIG_DRM_EXYNOS_DP
>>       platform_driver_unregister(&dp_driver);
>> +err_unregister_decon_drv:
>> +#endif
>> +
>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>> +     platform_driver_unregister(&decon_driver);
>>  err_unregister_fimd_drv:
>>  #endif
>>
>> @@ -709,6 +720,10 @@ static int exynos_drm_platform_remove(struct
> platform_device *pdev)
>>       platform_driver_unregister(&fimd_driver);
>>  #endif
>>
>> +#ifdef CONFIG_DRM_EXYNOS_DECON
>> +     platform_driver_unregister(&decon_driver);
>> +#endif
>> +
>>  #ifdef CONFIG_DRM_EXYNOS_DSI
>>       platform_driver_unregister(&dsi_driver);
>>  #endif
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> index d22e640..25f750d 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> @@ -352,6 +352,16 @@ int exynos_drm_probe_vidi(void);
>>   */
>>  void exynos_drm_remove_vidi(void);
>>
>> +/*
>> + * this function registers exynos drm decon platform device/driver.
>> + */
>> +int exynos_drm_probe_decon(void);
>> +
>> +/*
>> + * this function unregister exynos drm decon platform device/driver.
>> + */
>> +void exynos_drm_remove_decon(void);
>> +
>>  /* This function creates a encoder and a connector, and initializes
> them. */
>>  int exynos_drm_create_enc_conn(struct drm_device *dev,
>>                               struct exynos_drm_display *display);
>> @@ -364,6 +374,7 @@ void exynos_drm_component_del(struct device *dev,
>>                               enum exynos_drm_device_type dev_type);
>>
>>  extern struct platform_driver fimd_driver;
>> +extern struct platform_driver decon_driver;
>>  extern struct platform_driver dp_driver;
>>  extern struct platform_driver dsi_driver;
>>  extern struct platform_driver mixer_driver;
>> diff --git a/include/video/samsung_decon.h b/include/video/samsung_decon.h
>> new file mode 100644
>> index 0000000..8839120
>> --- /dev/null
>> +++ b/include/video/samsung_decon.h
>> @@ -0,0 +1,346 @@
>> +/* include/video/exynos_drm_decon.h
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + * Author: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute  it and/or
> modify it
>> + * under  the terms of  the GNU General  Public License as published
> by the
>> + * Free Software Foundation;  either version 2 of the  License, or
> (at your
>> + * option) any later version.
>> + */
>> +
>> +/* VIDCON0 */
>> +#define VIDCON0                                      (0x00)
>> +
>> +#define VIDCON0_SWRESET                              (1 << 28)
>> +#define VIDCON0_DECON_STOP_STATUS            (1 << 2)
>> +#define VIDCON0_ENVID                                (1 << 1)
>> +#define VIDCON0_ENVID_F                              (1 << 0)
>> +
>> +/* VIDOUTCON0 */
>> +#define VIDOUTCON0                           (0x4)
>> +
>> +#define VIDOUTCON0_LCD_ON                    (0x1 << 24)
>> +#define VIDOUTCON0_LCD_OFF                   (0x0 << 24)
>> +#define VIDOUTCON0_IF_SHIFT                  (23)
>> +#define VIDOUTCON0_IF_MASK                   (0x1 << 23)
>> +#define VIDOUTCON0_RGBIF                     (0x0 << 23)
>> +#define VIDOUTCON0_I80IF                     (0x1 << 23)
>> +
>> +/* VIDCON3 */
>> +#define VIDCON3                                      (0x8)
>> +
>> +/* VIDCON4 */
>> +#define VIDCON4                                      (0xC)
>> +#define VIDCON4_FIFOCNT_START_EN             (1 << 0)
>> +
>> +/* VCLKCON0 */
>> +#define VCLKCON0                             0x10
>> +#define VCLKCON0_CLKVALUP                    (1 << 8)
>> +#define VCLKCON0_VCLKFREE                    (1 << 0)
>> +
>> +/* VCLKCON */
>> +#define VCLKCON1                             0x14
>> +#define VCLKCON1_CLKVAL_NUM_VCLK(val)                (((val) & 0xff) << 0)
>> +#define VCLKCON2                             0x18
>> +
>> +/* SHADOWCON */
>> +#define SHADOWCON                            (0x30)
>> +
>> +#define SHADOWCON_WINx_PROTECT(_win)         (1 << (10 + (_win)))
>> +
>> +/* WINCONx */
>> +#define WINCON(_win)                         (0x50 + ((_win) * 4))
>> +
>> +#define WINCONx_BUFSTATUS                    (0x3 << 30)
>> +#define WINCONx_BUFSEL_MASK                  (0x3 << 28)
>> +#define WINCONx_BUFSEL_SHIFT                 (28)
>> +#define WINCONx_TRIPLE_BUF_MODE                      (0x1 << 18)
>> +#define WINCONx_DOUBLE_BUF_MODE                      (0x0 << 18)
>> +#define WINCONx_BURSTLEN_16WORD                      (0x0 << 11)
>> +#define WINCONx_BURSTLEN_8WORD                       (0x1 << 11)
>> +#define WINCONx_BURSTLEN_MASK                        (0x1 << 11)
>> +#define WINCONx_BURSTLEN_SHIFT                       (11)
>> +#define WINCONx_BLD_PLANE                    (0 << 8)
>> +#define WINCONx_BLD_PIX                              (1 << 8)
>> +#define WINCONx_ALPHA_MUL                    (1 << 7)
>> +
>> +#define WINCONx_BPPMODE_MASK                 (0xf << 2)
>> +#define WINCONx_BPPMODE_SHIFT                        (2)
>> +#define WINCONx_BPPMODE_16BPP_565            (0x8 << 2)
>> +#define WINCONx_BPPMODE_24BPP_BGRx           (0x7 << 2)
>> +#define WINCONx_BPPMODE_24BPP_RGBx           (0x6 << 2)
>> +#define WINCONx_BPPMODE_24BPP_xBGR           (0x5 << 2)
>> +#define WINCONx_BPPMODE_24BPP_xRGB           (0x4 << 2)
>> +#define WINCONx_BPPMODE_32BPP_BGRA           (0x3 << 2)
>> +#define WINCONx_BPPMODE_32BPP_RGBA           (0x2 << 2)
>> +#define WINCONx_BPPMODE_32BPP_ABGR           (0x1 << 2)
>> +#define WINCONx_BPPMODE_32BPP_ARGB           (0x0 << 2)
>> +#define WINCONx_ALPHA_SEL                    (1 << 1)
>> +#define WINCONx_ENWIN                                (1 << 0)
>> +
>> +#define WINCON1_ALPHA_MUL_F                  (1 << 7)
>> +#define WINCON2_ALPHA_MUL_F                  (1 << 7)
>> +#define WINCON3_ALPHA_MUL_F                  (1 << 7)
>> +#define WINCON4_ALPHA_MUL_F                  (1 << 7)
>> +
>> +/*  VIDOSDxH: The height for the OSD image(READ ONLY)*/
>> +#define VIDOSD_H(_x)                         (0x80 + ((_x) * 4))
>> +
>> +/* Frame buffer start addresses: VIDWxxADD0n */
>> +#define VIDW_BUF_START(_win)                 (0x80 + ((_win) * 0x10))
>> +#define VIDW_BUF_START1(_win)                        (0x84 + ((_win) * 0x10))
>> +#define VIDW_BUF_START2(_win)                        (0x88 + ((_win) * 0x10))
>> +
>> +#define VIDW_WHOLE_X(_win)                   (0x0130 + ((_win) * 8))
>> +#define VIDW_WHOLE_Y(_win)                   (0x0134 + ((_win) * 8))
>> +#define VIDW_OFFSET_X(_win)                  (0x0170 + ((_win) * 8))
>> +#define VIDW_OFFSET_Y(_win)                  (0x0174 + ((_win) * 8))
>> +#define VIDW_BLKOFFSET(_win)                 (0x01B0 + ((_win) * 4))
>> +#define VIDW_BLKSIZE(win)                    (0x0200 + ((_win) * 4))
>> +
>> +/* Interrupt controls register */
>> +#define VIDINTCON2                           (0x228)
>> +
>> +#define VIDINTCON1_INTEXTRA1_EN                      (1 << 1)
>> +#define VIDINTCON1_INTEXTRA0_EN                      (1 << 0)
>> +
>> +/* Interrupt controls and status register */
>> +#define VIDINTCON3                           (0x22C)
>> +
>> +#define VIDINTCON1_INTEXTRA1_PEND            (1 << 1)
>> +#define VIDINTCON1_INTEXTRA0_PEND            (1 << 0)
>> +
>> +/* VIDOSDxA ~ VIDOSDxE */
>> +#define VIDOSD_BASE                          (0x230)
>> +
>> +#define OSD_STRIDE                           (0x20)
>> +
>> +#define VIDOSD_A(_win)                               (VIDOSD_BASE + \
>> +                                             ((_win) * OSD_STRIDE) + 0x00)
>> +#define VIDOSD_B(_win)                               (VIDOSD_BASE + \
>> +                                             ((_win) * OSD_STRIDE) + 0x04)
>> +#define VIDOSD_C(_win)                               (VIDOSD_BASE + \
>> +                                             ((_win) * OSD_STRIDE) + 0x08)
>> +#define VIDOSD_D(_win)                               (VIDOSD_BASE + \
>> +                                             ((_win) * OSD_STRIDE) + 0x0C)
>> +#define VIDOSD_E(_win)                               (VIDOSD_BASE + \
>> +                                             ((_win) * OSD_STRIDE) + 0x10)
>> +
>> +#define VIDOSDxA_TOPLEFT_X_MASK                      (0x1fff << 13)
>> +#define VIDOSDxA_TOPLEFT_X_SHIFT             (13)
>> +#define VIDOSDxA_TOPLEFT_X_LIMIT             (0x1fff)
>> +#define VIDOSDxA_TOPLEFT_X(_x)                       (((_x) & 0x1fff) << 13)
>> +
>> +#define VIDOSDxA_TOPLEFT_Y_MASK                      (0x1fff << 0)
>> +#define VIDOSDxA_TOPLEFT_Y_SHIFT             (0)
>> +#define VIDOSDxA_TOPLEFT_Y_LIMIT             (0x1fff)
>> +#define VIDOSDxA_TOPLEFT_Y(_x)                       (((_x) & 0x1fff) << 0)
>> +
>> +#define VIDOSDxB_BOTRIGHT_X_MASK             (0x1fff << 13)
>> +#define VIDOSDxB_BOTRIGHT_X_SHIFT            (13)
>> +#define VIDOSDxB_BOTRIGHT_X_LIMIT            (0x1fff)
>> +#define VIDOSDxB_BOTRIGHT_X(_x)                      (((_x) & 0x1fff) << 13)
>> +
>> +#define VIDOSDxB_BOTRIGHT_Y_MASK             (0x1fff << 0)
>> +#define VIDOSDxB_BOTRIGHT_Y_SHIFT            (0)
>> +#define VIDOSDxB_BOTRIGHT_Y_LIMIT            (0x1fff)
>> +#define VIDOSDxB_BOTRIGHT_Y(_x)                      (((_x) & 0x1fff) << 0)
>> +
>> +#define VIDOSDxC_ALPHA0_R_F(_x)                      (((_x) & 0xFF) << 16)
>> +#define VIDOSDxC_ALPHA0_G_F(_x)                      (((_x) & 0xFF) << 8)
>> +#define VIDOSDxC_ALPHA0_B_F(_x)                      (((_x) & 0xFF) << 0)
>> +
>> +#define VIDOSDxD_ALPHA1_R_F(_x)                      (((_x) & 0xFF) << 16)
>> +#define VIDOSDxD_ALPHA1_G_F(_x)                      (((_x) & 0xFF) << 8)
>> +#define VIDOSDxD_ALPHA1_B_F(_x)                      (((_x) & 0xFF) >> 0)
>> +
>> +/* Window MAP (Color map) */
>> +#define WINxMAP(_win)                                (0x340 + ((_win) * 4))
>> +
>> +#define WINxMAP_MAP                          (1 << 24)
>> +#define WINxMAP_MAP_COLOUR_MASK                      (0xffffff << 0)
>> +#define WINxMAP_MAP_COLOUR_SHIFT             (0)
>> +#define WINxMAP_MAP_COLOUR_LIMIT             (0xffffff)
>> +#define WINxMAP_MAP_COLOUR(_x)                       ((_x) << 0)
>> +
>> +/* Window colour-key control registers */
>> +#define WKEYCON                                      (0x370)
>> +
>> +#define WKEYCON0                             (0x00)
>> +#define WKEYCON1                             (0x04)
>> +#define WxKEYCON0_KEYBL_EN                   (1 << 26)
>> +#define WxKEYCON0_KEYEN_F                    (1 << 25)
>> +#define WxKEYCON0_DIRCON                     (1 << 24)
>> +#define WxKEYCON0_COMPKEY_MASK                       (0xffffff << 0)
>> +#define WxKEYCON0_COMPKEY_SHIFT                      (0)
>> +#define WxKEYCON0_COMPKEY_LIMIT                      (0xffffff)
>> +#define WxKEYCON0_COMPKEY(_x)                        ((_x) << 0)
>> +#define WxKEYCON1_COLVAL_MASK                        (0xffffff << 0)
>> +#define WxKEYCON1_COLVAL_SHIFT                       (0)
>> +#define WxKEYCON1_COLVAL_LIMIT                       (0xffffff)
>> +#define WxKEYCON1_COLVAL(_x)                 ((_x) << 0)
>> +
>> +/* color key control register for hardware window 1 ~ 4. */
>> +#define WKEYCON0_BASE(x)             ((WKEYCON + WKEYCON0) + ((x - 1) * 8))
>> +/* color key value register for hardware window 1 ~ 4. */
>> +#define WKEYCON1_BASE(x)             ((WKEYCON + WKEYCON1) + ((x - 1) * 8))
>> +
>> +/* Window KEY Alpha value */
>> +#define WxKEYALPHA(_win)                     (0x3A0 + (((_win) - 1) * 0x4))
>> +
>> +#define Wx_KEYALPHA_R_F_SHIFT                        (16)
>> +#define Wx_KEYALPHA_G_F_SHIFT                        (8)
>> +#define Wx_KEYALPHA_B_F_SHIFT                        (0)
>> +
>> +/* Blending equation */
>> +#define BLENDE(_win)                         (0x03C0 + ((_win) * 4))
>> +#define BLENDE_COEF_ZERO                     0x0
>> +#define BLENDE_COEF_ONE                              0x1
>> +#define BLENDE_COEF_ALPHA_A                  0x2
>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_A                0x3
>> +#define BLENDE_COEF_ALPHA_B                  0x4
>> +#define BLENDE_COEF_ONE_MINUS_ALPHA_B                0x5
>> +#define BLENDE_COEF_ALPHA0                   0x6
>> +#define BLENDE_COEF_A                                0xA
>> +#define BLENDE_COEF_ONE_MINUS_A                      0xB
>> +#define BLENDE_COEF_B                                0xC
>> +#define BLENDE_COEF_ONE_MINUS_B                      0xD
>> +#define BLENDE_Q_FUNC(_v)                    ((_v) << 18)
>> +#define BLENDE_P_FUNC(_v)                    ((_v) << 12)
>> +#define BLENDE_B_FUNC(_v)                    ((_v) << 6)
>> +#define BLENDE_A_FUNC(_v)                    ((_v) << 0)
>> +
>> +/* Blending equation control */
>> +#define BLENDCON                             (0x3D8)
>> +#define BLENDCON_NEW_MASK                    (1 << 0)
>> +#define BLENDCON_NEW_8BIT_ALPHA_VALUE                (1 << 0)
>> +#define BLENDCON_NEW_4BIT_ALPHA_VALUE                (0 << 0)
>> +
>> +/* Interrupt control register */
>> +#define VIDINTCON0                           (0x500)
>> +
>> +#define VIDINTCON0_WAKEUP_MASK                       (0x3f << 26)
>> +#define VIDINTCON0_INTEXTRAEN                        (1 << 21)
>> +
>> +#define VIDINTCON0_FRAMESEL0_SHIFT           (15)
>> +#define VIDINTCON0_FRAMESEL0_MASK            (0x3 << 15)
>> +#define VIDINTCON0_FRAMESEL0_BACKPORCH               (0x0 << 15)
>> +#define VIDINTCON0_FRAMESEL0_VSYNC           (0x1 << 15)
>> +#define VIDINTCON0_FRAMESEL0_ACTIVE          (0x2 << 15)
>> +#define VIDINTCON0_FRAMESEL0_FRONTPORCH              (0x3 << 15)
>> +
>> +#define VIDINTCON0_INT_FRAME                 (1 << 11)
>> +
>> +#define VIDINTCON0_FIFOLEVEL_MASK            (0x7 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_SHIFT           (3)
>> +#define VIDINTCON0_FIFOLEVEL_EMPTY           (0x0 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_TO25PC          (0x1 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_TO50PC          (0x2 << 3)
>> +#define VIDINTCON0_FIFOLEVEL_FULL            (0x4 << 3)
>> +
>> +#define VIDINTCON0_FIFOSEL_MAIN_EN           (1 << 1)
>> +#define VIDINTCON0_INT_FIFO                  (1 << 1)
>> +
>> +#define VIDINTCON0_INT_ENABLE                        (1 << 0)
>> +
>> +/* Interrupt controls and status register */
>> +#define VIDINTCON1                           (0x504)
>> +
>> +#define VIDINTCON1_INT_EXTRA                 (1 << 3)
>> +#define VIDINTCON1_INT_I80                   (1 << 2)
>> +#define VIDINTCON1_INT_FRAME                 (1 << 1)
>> +#define VIDINTCON1_INT_FIFO                  (1 << 0)
>> +
>> +/* VIDCON1 */
>> +#define VIDCON1(_x)                          (0x0600 + ((_x) * 0x50))
>> +#define VIDCON1_LINECNT_GET(_v)                      (((_v) >> 17) & 0x1fff)
>> +#define VIDCON1_VCLK_MASK                    (0x3 << 9)
>> +#define VIDCON1_VCLK_HOLD                    (0x0 << 9)
>> +#define VIDCON1_VCLK_RUN                     (0x1 << 9)
>> +#define VIDCON1_VCLK_RUN_VDEN_DISABLE                (0x3 << 9)
>> +#define VIDCON1_RGB_ORDER_O_MASK             (0x7 << 4)
>> +#define VIDCON1_RGB_ORDER_O_RGB                      (0x0 << 4)
>> +#define VIDCON1_RGB_ORDER_O_GBR                      (0x1 << 4)
>> +#define VIDCON1_RGB_ORDER_O_BRG                      (0x2 << 4)
>> +#define VIDCON1_RGB_ORDER_O_BGR                      (0x4 << 4)
>> +#define VIDCON1_RGB_ORDER_O_RBG                      (0x5 << 4)
>> +#define VIDCON1_RGB_ORDER_O_GRB                      (0x6 << 4)
>> +
>> +/* VIDTCON0 */
>> +#define VIDTCON0                             (0x610)
>> +
>> +#define VIDTCON0_VBPD_MASK                   (0xffff << 16)
>> +#define VIDTCON0_VBPD_SHIFT                  (16)
>> +#define VIDTCON0_VBPD_LIMIT                  (0xffff)
>> +#define VIDTCON0_VBPD(_x)                    ((_x) << 16)
>> +
>> +#define VIDTCON0_VFPD_MASK                   (0xffff << 0)
>> +#define VIDTCON0_VFPD_SHIFT                  (0)
>> +#define VIDTCON0_VFPD_LIMIT                  (0xffff)
>> +#define VIDTCON0_VFPD(_x)                    ((_x) << 0)
>> +
>> +/* VIDTCON1 */
>> +#define VIDTCON1                             (0x614)
>> +
>> +#define VIDTCON1_VSPW_MASK                   (0xffff << 16)
>> +#define VIDTCON1_VSPW_SHIFT                  (16)
>> +#define VIDTCON1_VSPW_LIMIT                  (0xffff)
>> +#define VIDTCON1_VSPW(_x)                    ((_x) << 16)
>> +
>> +/* VIDTCON2 */
>> +#define VIDTCON2                             (0x618)
>> +
>> +#define VIDTCON2_HBPD_MASK                   (0xffff << 16)
>> +#define VIDTCON2_HBPD_SHIFT                  (16)
>> +#define VIDTCON2_HBPD_LIMIT                  (0xffff)
>> +#define VIDTCON2_HBPD(_x)                    ((_x) << 16)
>> +
>> +#define VIDTCON2_HFPD_MASK                   (0xffff << 0)
>> +#define VIDTCON2_HFPD_SHIFT                  (0)
>> +#define VIDTCON2_HFPD_LIMIT                  (0xffff)
>> +#define VIDTCON2_HFPD(_x)                    ((_x) << 0)
>> +
>> +/* VIDTCON3 */
>> +#define VIDTCON3                             (0x61C)
>> +
>> +#define VIDTCON3_HSPW_MASK                   (0xffff << 16)
>> +#define VIDTCON3_HSPW_SHIFT                  (16)
>> +#define VIDTCON3_HSPW_LIMIT                  (0xffff)
>> +#define VIDTCON3_HSPW(_x)                    ((_x) << 16)
>> +
>> +/* VIDTCON4 */
>> +#define VIDTCON4                             (0x620)
>> +
>> +#define VIDTCON4_LINEVAL_MASK                        (0xfff << 16)
>> +#define VIDTCON4_LINEVAL_SHIFT                       (16)
>> +#define VIDTCON4_LINEVAL_LIMIT                       (0xfff)
>> +#define VIDTCON4_LINEVAL(_x)                 (((_x) & 0xfff) << 16)
>> +
>> +#define VIDTCON4_HOZVAL_MASK                 (0xfff << 0)
>> +#define VIDTCON4_HOZVAL_SHIFT                        (0)
>> +#define VIDTCON4_HOZVAL_LIMIT                        (0xfff)
>> +#define VIDTCON4_HOZVAL(_x)                  (((_x) & 0xfff) << 0)
>> +
>> +/* LINECNT OP THRSHOLD*/
>> +#define LINECNT_OP_THRESHOLD                 (0x630)
>> +
>> +/* CRCCTRL */
>> +#define CRCCTRL                                      (0x6C8)
>> +#define CRCCTRL_CRCCLKEN                     (0x1 << 2)
>> +#define CRCCTRL_CRCSTART_F                   (0x1 << 1)
>> +#define CRCCTRL_CRCEN                                (0x1 << 0)
>> +
>> +/* DECON_CMU */
>> +#define DECON_CMU                            (0x704)
>> +
>> +#define DECON_CMU_ALL_CLKGATE_ENABLE         (0x3)
>> +#define DECON_CMU_SE_CLKGATE_ENABLE          (0x1 << 2)
>> +#define DECON_CMU_SFR_CLKGATE_ENABLE         (0x1 << 1)
>> +#define DECON_CMU_MEM_CLKGATE_ENABLE         (0x1 << 0)
>> +
>> +/* DECON_UPDATE */
>> +#define DECON_UPDATE                         (0x710)
>> +
>> +#define DECON_UPDATE_SLAVE_SYNC                      (1 << 4)
>> +#define DECON_UPDATE_STANDALONE_F            (1 << 0)
>>
>
>

Thanks,
Ajay
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux