Hello Mark,
This is the second version of the series that adds operating modes
support for the regulators in the max77802 PMIC. It address issues
pointed out in "regulator: max77802: Add .{get,set}_mode callbacks"
and also removes the patches you already picked on the topic branch.
The first version of the series was [0].
The series adds a "maxim,regulator-initial-mode" property to configure
at startup the operating mode for the regulators that support changing
its mode during normal operation and "maxim,regulator-{disk,mem}-mode"
properties for the regulators that only support changing its operating
mode when the system enters in a suspend state.
The regulators can be enabled or disabled during suspend by using the
standard "regulator-{on,off}-in-suspend" properties from Chanwoo Choi's
regulator suspend state series [1].
I tried to use as much as possible the infrastructure that is already
provided in the regulator framework by adding the needed handlers for
the set_suspend_* operations.
Also, the driver still had some assumptions and didn't clearly made a
distinction between the valid modes (normal and low power) and off which
is not an operating mode as you explained. So I reworked a bit to better
treat them separately as is expected by the regulator API.
This series depend on [1] and also v2 of patch:
"ARM: EXYNOS: Call regulator core suspend prepare and finish functions" [2].
NOTE: Patch #4 touches a header in include/linux/mfd so some coordination
with the mfd maintainer (added as cc) will be needed.
Javier Martinez Canillas (7):
regulator: max77802: Add .{get,set}_mode callbacks
regulator: max77802: Add set suspend mode for BUCKs and simplify code
regulator: max77802: Don't treat OFF as an operating mode
regulator: max77802: Add header for operating modes
regulator: max77802: Document regulator opmode DT properties
regulator: max77802: Parse regulator operating mode properties
ARM: dts: Configure regulators for suspend on exynos Peach boards
.../devicetree/bindings/regulator/max77802.txt | 45 ++++++++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 81 ++++++++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 81 ++++++++++++++
drivers/regulator/max77802.c | 122 ++++++++++++++++-----
include/dt-bindings/regulator/maxim,max77802.h | 18 +++
include/linux/mfd/max77686.h | 7 --
6 files changed, 319 insertions(+), 35 deletions(-)
create mode 100644 include/dt-bindings/regulator/maxim,max77802.h
Patch #1 adds a get and set mode function handlers for the regulators whose
operating mode can be changed at runtime.
Patch #2 adds support for changing the operating mode for all regulators
that support setting a different opmode during suspend.
Patch #3 is a cleanup to not call OFF an operating mode.
Patch #4 adds a header file with the valid operating modes so it can be used
by Device Tree source files.
Patch #5 extend the max77802 DT binding to include the properties used to
setup the regulators modes.
Patch #6 adds the support to parse these from the driver.
Patch #7 configures the modes for the max77802 regulators in the Device Tree
source file of the Peach Chromebooks.
Best regards,
Javier
[0]: https://lkml.org/lkml/2014/10/8/331
[1]: https://lkml.org/lkml/2014/10/10/161
[2]: http://www.spinics.net/lists/arm-kernel/msg369923.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
