[PATCH 8/9] regulator: max77802: Parse regulator operating mode properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The max77802 PMIC regulators output can be configured in one of two
modes: Output ON (normal) and Output ON in Low Power Mode. Some of
the regulators support their operating mode to be changed on startup
or by consumers when the system is running while others only support
their operating mode to be changed while the system has entered in a
suspend state.

The max77802 PMIC Device Tree binding document a set of properties to
configure the regulators operating modes from a FDT. This patch parse
those properties and fills the regulator constraints so the regulator
core can call the suspend handlers when the system enters into sleep.

Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
 drivers/regulator/max77802.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index 43e34dd..c922edc 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -517,6 +517,22 @@ static struct regulator_desc regulators[] = {
 };
 
 #ifdef CONFIG_OF
+
+static void max77802_parse_opmodes(struct device_node *np,
+				   struct regulation_constraints *cons)
+{
+	u32 pval;
+
+	if (!of_property_read_u32(np, "maxim,regulator-initial-mode", &pval))
+		cons->initial_mode = MAX77802_MODE(pval);
+
+	if (!of_property_read_u32(np, "maxim,regulator-disk-mode", &pval))
+		cons->state_disk.mode = MAX77802_MODE(pval);
+
+	if (!of_property_read_u32(np, "maxim,regulator-mem-mode", &pval))
+		cons->state_mem.mode = MAX77802_MODE(pval);
+}
+
 static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
 					struct max77686_platform_data *pdata)
 {
@@ -554,6 +570,8 @@ static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
 		rdata[i].initdata = rmatch.init_data;
 		rdata[i].of_node = rmatch.of_node;
 		rdata[i].id = regulators[i].id;
+		max77802_parse_opmodes(rdata[i].of_node,
+				       &rdata[i].initdata->constraints);
 	}
 
 	pdata->regulators = rdata;
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux