Add a function handler for the struct regulator_ops .set_mode so an
operating mode (opmode) can be set for regulators.
Regulators opmode are defined using the generic REGULATOR_MODE_*
modes so the driver maps these generic modes to the device-specific
operating modes as stated in the hardware data-sheet.
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
drivers/regulator/max77802.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index d89792b..04ed5cf 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -83,6 +83,34 @@ static int max77802_get_opmode_shift(int id)
return -EINVAL;
}
+static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ unsigned int val;
+ int id = rdev_get_id(rdev);
+ int shift = max77802_get_opmode_shift(id);
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ val = MAX77802_OPMODE_NORMAL;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = MAX77802_OPMODE_LP;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ val = MAX77802_OPMODE_STANDBY;
+ break;
+ default:
+ dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77802->opmode[id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val << shift);
+}
+
/*
* Some BUCKS supports Normal[ON/OFF] mode during suspend
*
@@ -247,6 +275,7 @@ static struct regulator_ops max77802_ldo_ops_logic1 = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_mode = max77802_set_mode,
.set_suspend_mode = max77802_ldo_set_suspend_mode_logic1,
};
@@ -262,6 +291,7 @@ static struct regulator_ops max77802_ldo_ops_logic2 = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_mode = max77802_set_mode,
.set_suspend_mode = max77802_ldo_set_suspend_mode_logic2,
};
@@ -274,6 +304,7 @@ static struct regulator_ops max77802_buck_16_dvs_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_mode = max77802_set_mode,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_4bit,
.set_suspend_disable = max77802_buck_set_suspend_disable,
@@ -288,6 +319,7 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_mode = max77802_set_mode,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
.set_suspend_disable = max77802_buck_set_suspend_disable,
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
