Regulators for MMC2 (SD card) are PVDD_TFLASH_2V8 (LDO19) for vmmc
and PVDD_APIO_MMCOFF_2V8 (LDO13) for vqmmc. Currently the device
tree entry for MMC2 uses PVDD_PRE_1V8 (LDO10) for vmmc and vqmmc is
not specified. Fix it.
Without this patch:
- "mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators"
patch causes a SD card detection to fail
- "mmc: dw_mmc: Support voltage changes" patch causes a boot hang
This patch fixes both above problems.
Suggested-by: Doug Anderson <dianders@xxxxxxxxxx>
Cc: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2014-10-02 15:44:53.014826886 +0200
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2014-10-02 17:35:24.110600398 +0200
@@ -74,7 +74,8 @@
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- vmmc-supply = <&ldo10_reg>;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
slot@0 {
reg = <0>;
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
