Hi Tomasz,
On Sat, Sep 13, 2014 at 4:47 PM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Naveen,
>
> Please see my comments inline.
>
> On 12.09.2014 17:26, Naveen Krishna Chatradhi wrote:
>> Add initial clock support for Exynos7 SoC which is required
>> to bring up platforms based on Exynos7.
>
> [snip]
>
>> +External clocks:
>> +
>> +There are several clocks that are generated outside the SoC. It
>> +is expected that they are defined using standard clock bindings
>> +with following clock-output-names:
>> +
>> + - "fin_pll" - PLL input clock from XXTI
>
> In addition to just relying on clock names (which I hope to finally go
> away from common clock framework some day) the binding should be defined
> to take all input clocks using generic clock bindings (i.e. clocks and
> clock-names). Even if the driver wouldn't use that yet, this would help
> with determining initialization order of clock providers.
OK, will fix.
>
>> +
>> +Required Properties for Clock Controller:
>> +
>> + - compatible: clock controllers will use one of the following
>> + compatible strings to indicate the clock controller
>> + functionality.
>> +
>> + - "samsung,exynos7-clock-topc"
>> + - "samsung,exynos7-clock-top0"
>> + - "samsung,exynos7-clock-peric0"
>> + - "samsung,exynos7-clock-peric1"
>> + - "samsung,exynos7-clock-peris"
>> +
>> + - reg: physical base address of the controller and the length of
>> + memory mapped region.
>> +
>> + - #clock-cells: should be 1.
>> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
>> index 6fb4bc6..5da0ba9 100644
>> --- a/drivers/clk/samsung/Makefile
>> +++ b/drivers/clk/samsung/Makefile
>> @@ -18,3 +18,4 @@ obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
>> obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
>> obj-$(CONFIG_ARCH_S3C64XX) += clk-s3c64xx.o
>> obj-$(CONFIG_ARCH_S5PV210) += clk-s5pv210.o clk-s5pv210-audss.o
>> +obj-$(CONFIG_ARCH_EXYNOS7) += clk-exynos7.o
>
> Please keep the entries sorted alphabetically.
>
>> diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
>> new file mode 100644
>> index 0000000..3ea8d0e
>> --- /dev/null
>> +++ b/drivers/clk/samsung/clk-exynos7.c
>
> [snip]
>
>> +static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
>> + FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
>> + FFACTOR(0, "ffac_topc_bus0_pll_div4",
>> + "ffac_topc_bus0_pll_div2", 1, 2, 0),
>
> Please use a consistent way of breaking long lines. Here you have 3
> tabs, but further in the driver I can see 1 tab or 2 tabs. I'd recommend
> making them all 1 tab.
Will use 1 tab across the file.
>
>> + FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
>> + FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
>> + FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
>> +};
>
> [snip]
>
>> +static void __init exynos7_clk_topc_init(struct device_node *np)
>> +{
>> + struct exynos_cmu_info cmu = {0};
>> +
>> + cmu.pll_clks = topc_pll_clks;
>> + cmu.nr_pll_clks = ARRAY_SIZE(topc_pll_clks);
>> + cmu.mux_clks = topc_mux_clks;
>> + cmu.nr_mux_clks = ARRAY_SIZE(topc_mux_clks);
>> + cmu.div_clks = topc_div_clks;
>> + cmu.nr_div_clks = ARRAY_SIZE(topc_div_clks);
>> + cmu.fixed_factor_clks = topc_fixed_factor_clks;
>> + cmu.nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks);
>> + cmu.clk_regs = topc_clk_regs;
>> + cmu.nr_clk_regs = ARRAY_SIZE(topc_clk_regs);
>
> I wonder if you couldn't simply make this struct statically initialized
> and marked as __initdata.
Will change.
>
> Otherwise looks good.
>
> Best regards,
> Tomasz
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
