Javier,
On Wed, Aug 20, 2014 at 4:19 AM, Javier Martinez Canillas
<javier.martinez@xxxxxxxxxxxxxxx> wrote:
> Exynos5420 based Peach Pit and Exynos5800 based Peach Pi boards
> uses a Maxim 77802 power management IC to drive regulators and
> its Real Time Clock. This patch adds support for this chip.
>
> These are the device nodes and pinctrl configuration that
> are present on the Peach pit DeviceTree source file in the
> the Chrome OS kernel 3.8 tree.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> Tested-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 372 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 372 +++++++++++++++++++++++++++++
> 2 files changed, 744 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index ab06148..78cea4c 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -11,6 +11,7 @@
> /dts-v1/;
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include "exynos5420.dtsi"
>
> / {
> @@ -144,6 +145,339 @@
> ddc = <&i2c_2>;
> };
>
> +&hsi2c_4 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + max77802-pmic@9 {
> + compatible = "maxim,max77802";
> + interrupt-parent = <&gpx3>;
> + interrupts = <1 IRQ_TYPE_NONE>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
> + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
> + wakeup-source;
> + reg = <0x9>;
> + #clock-cells = <1>;
...you've actually got the 32k clock specified in a reasonable way now
(unlike our tree).
We don't have opmode or the DVFS stuff upstream yet, so makes sense
that's not here.
> + inb1-supply = <&tps65090_dcdc2>;
> + inb2-supply = <&tps65090_dcdc1>;
> + inb3-supply = <&tps65090_dcdc2>;
> + inb4-supply = <&tps65090_dcdc2>;
> + inb5-supply = <&tps65090_dcdc1>;
> + inb6-supply = <&tps65090_dcdc2>;
> + inb7-supply = <&tps65090_dcdc1>;
> + inb8-supply = <&tps65090_dcdc1>;
> + inb9-supply = <&tps65090_dcdc1>;
> + inb10-supply = <&tps65090_dcdc1>;
> +
> + inl1-supply = <&buck5_reg>;
> + inl2-supply = <&buck7_reg>;
> + inl3-supply = <&buck9_reg>;
> + inl4-supply = <&buck9_reg>;
> + inl5-supply = <&buck9_reg>;
> + inl6-supply = <&tps65090_dcdc2>;
> + inl7-supply = <&buck9_reg>;
> + inl9-supply = <&tps65090_dcdc2>;
> + inl10-supply = <&buck7_reg>;
I double-checked your input supplies against schematics (since we
don't have them right in our tree). They look right.
> +
> + regulators {
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "vdd_1v2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "vdd_kfc";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "vdd_1v35";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "vdd_emmc";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "vdd_2v";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo1_reg: LDO1 {
> + regulator-name = "vdd_1v0";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "vdd_1v2_2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "vdd_1v8_3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + vqmmc_sdcard: ldo4_reg: LDO4 {
> + regulator-name = "vdd_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "vdd_1v8_5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "vdd_1v8_6";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "vdd_1v8_7";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "vdd_ldo8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "vdd_ldo9";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "vdd_ldo10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "vdd_ldo11";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "vdd_ldo12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "vdd_ldo13";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "vdd_ldo14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "vdd_ldo15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "vdd_g3ds";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + ldo18_reg: LDO18 {
> + regulator-name = "ldo_18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "ldo_19";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo20_reg: LDO20 {
> + regulator-name = "ldo_20";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo21_reg: LDO21 {
> + regulator-name = "ldo_21";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo23_reg: LDO23 {
> + regulator-name = "ldo_23";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + ldo24_reg: LDO24 {
> + regulator-name = "ldo_24";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo25_reg: LDO25 {
> + regulator-name = "ldo_25";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo26_reg: LDO26 {
> + regulator-name = "ldo_26";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo27_reg: LDO27 {
> + regulator-name = "ldo_27";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + ldo28_reg: LDO28 {
> + regulator-name = "ldo_28";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo29_reg: LDO29 {
> + regulator-name = "ldo_29";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo30_reg: LDO30 {
> + regulator-name = "vdd_mifs";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo32_reg: LDO32 {
> + regulator-name = "ldo_32";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo33_reg: LDO33 {
> + regulator-name = "ldo_33";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + ldo34_reg: LDO34 {
> + regulator-name = "ldo_34";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + ldo35_reg: LDO35 {
> + regulator-name = "ldo_35";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + inl2-supply = <&buck7_reg>;
Is this a typo? Shouldn't supplies be specified at the top?
Other than that, you can add my Reviewed-by.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
