Hi,
On Fri, Aug 29, 2014 at 12:18 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> On Thu, Aug 28, 2014 at 09:01:56AM +0100, Vivek Gautam wrote:
>> Exynos7 also has a separate special gate clock going to the IP
>> apart from the usual AHB clock. So add support for the same.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> ---
>> drivers/usb/dwc3/dwc3-exynos.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
>> index f9fb8ad..bab6395 100644
>> --- a/drivers/usb/dwc3/dwc3-exynos.c
>> +++ b/drivers/usb/dwc3/dwc3-exynos.c
>> @@ -35,6 +35,7 @@ struct dwc3_exynos {
>> struct device *dev;
>>
>> struct clk *clk;
>> + struct clk *sclk;
>> struct regulator *vdd33;
>> struct regulator *vdd10;
>> };
>> @@ -141,10 +142,17 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
>> return -EINVAL;
>> }
>>
>> + /* Exynos7 has a special gate clock going to this IP */
>> + exynos->sclk = devm_clk_get(dev, "usbdrd30_sclk");
>> + if (IS_ERR(exynos->sclk))
>> + dev_warn(dev, "couldn't get sclk\n");
>
> Doesn't this introduce a pointless warning for Exynos SoCs other than
> Exynos7?
True, it will introduce an unnecessary warning for non-Exynos7 systems.
I initially thought of introducing a compatible check for Exynos7-dwc3, but that
way we may end up adding such checks for future SoCs which have similar
controller but have some clock difference or some other small change, no ?
>
>> +
>> exynos->dev = dev;
>> exynos->clk = clk;
>>
>> clk_prepare_enable(exynos->clk);
>> + if (!IS_ERR(exynos->sclk))
>> + clk_prepare_enable(exynos->sclk);
>
> If you replaced the returned err value with NULL you could avoid these
> IS_ERR cases.
Right, point taken.
[snip]
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
