On Tue, Aug 26, 2014 at 8:15 AM, Kevin Hilman <khilman@xxxxxxxxxx> wrote: > On Mon, Aug 25, 2014 at 10:25 PM, Chander Kashyap <k.chander@xxxxxxxxxxx> wrote: [...] >>> >>> Can you clarify how you're setting the voltages to ensure stability? >> >> below is the diff : wip/exynos/integ > > Thanks. > > I've applied your patch, and bootup shows vdd_arm and vdd_kfc at > 1500mV, but still when booting with cpuidle enabled (bL switcher > disabled), I'm seeing lockups with no kernel output. With CPUidle > disabled, things are pretty stable. > > What tree are you using to test this out on 5420? I'm using mainline > v3.17-rc1 + DT patch for CPUidle and this cpufreq series. See my > wip/exynos/integ branch at > git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux.git. I mis-stated this. Actually my tree is based on the v3.17-rc1 branch of the exynos-reference tree[1] + the above mentioned patches for cpuidle and cpufreq. Also, I've narrowed down the instability a bit, and it's not related to CPUidle. I can now trigger a boot hang even without CPUidle enabled. Here's a quick way to cause a boot lockup. With the switcher disabled, I enable CPUfreq and set the default governor to performance. As soon as cpufreq driver loads, it tries to use the top frequences for both clusters, and it hangs. Selectively disabling frequencies, I narrowed it down to the 1.3GHz and 1.2GHz frequencies of the little cluster. With these commented out in the DT, it will fully boot with the performance governor enabled. So that leads to the question. Are all of the operating points in exynos5420.dtsi valid for exynos5800, and have they been validated? Kevin [1]https://github.com/exynos-reference/kernel.git -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |