Re: [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/22/2014 10:47 PM, Yuvaraj Kumar C D wrote:
> This patch makes use of mmc_regulator_get_supply() to handle
> the vmmc and vqmmc regulators.Also it moves the code handling
> the these regulators to dw_mci_set_ios().It turned on the vmmc
> and vqmmc during MMC_POWER_UP and MMC_POWER_ON,and turned off
> during MMC_POWER_OFF.
> 
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> ---
> changes from v1:
> 	1.Used mmc_regulator_set_ocr() instead of regulator_enable() for vmmc.
> 	2.Turned on vmmc and vqmmc during MMC_POWER_UP.
> 	3. Removed the flags DW_MMC_CARD_POWERED and DW_MMC_IO_POWERED which
> 	   added during the initial version of this patch.
> 	4. Added error message, if it failed to turn on regulator's.
> 
>  drivers/mmc/host/dw_mmc.c  |   72 +++++++++++++++++++++-----------------------
>  include/linux/mmc/dw_mmc.h |    2 +-
>  2 files changed, 36 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 7f227e9..aadb0d6 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -936,6 +936,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	struct dw_mci_slot *slot = mmc_priv(mmc);
>  	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
>  	u32 regs;
> +	int ret;
>  
>  	switch (ios->bus_width) {
>  	case MMC_BUS_WIDTH_4:
> @@ -974,12 +975,38 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  
>  	switch (ios->power_mode) {
>  	case MMC_POWER_UP:
> +		if (!IS_ERR(mmc->supply.vmmc)) {
> +			ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
> +					ios->vdd);
> +			if (ret) {
> +				dev_err(slot->host->dev,
> +					"failed to enable vmmc regulator\n");
> +				/*return, if failed turn on vmmc*/
> +				return;
> +			}
> +		}
> +		if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {

Can't use the regulator_is_enabled() instead of "slot->host->vqmmc_enabled"?

Best Regards,
Jaehoon Chung
> +			ret = regulator_enable(mmc->supply.vqmmc);
> +			if (ret < 0)
> +				dev_err(slot->host->dev,
> +					"failed to enable vqmmc regulator\n");
> +			else
> +				slot->host->vqmmc_enabled = true;
> +		}
>  		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
>  		regs = mci_readl(slot->host, PWREN);
>  		regs |= (1 << slot->id);
>  		mci_writel(slot->host, PWREN, regs);
>  		break;
>  	case MMC_POWER_OFF:
> +		if (!IS_ERR(mmc->supply.vmmc))
> +			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
> +
> +		if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled) {
> +			regulator_disable(mmc->supply.vqmmc);
> +			slot->host->vqmmc_enabled = false;
> +		}
> +
>  		regs = mci_readl(slot->host, PWREN);
>  		regs &= ~(1 << slot->id);
>  		mci_writel(slot->host, PWREN, regs);
> @@ -2110,7 +2137,13 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  		mmc->f_max = freq[1];
>  	}
>  
> -	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
> +	/*if there are external regulators, get them*/
> +	ret = mmc_regulator_get_supply(mmc);
> +	if (ret == -EPROBE_DEFER)
> +		goto err_setup_bus;
> +
> +	if (!mmc->ocr_avail)
> +		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
>  
>  	if (host->pdata->caps)
>  		mmc->caps = host->pdata->caps;
> @@ -2176,7 +2209,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>  
>  err_setup_bus:
>  	mmc_free_host(mmc);
> -	return -EINVAL;
> +	return ret;
>  }
>  
>  static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
> @@ -2469,24 +2502,6 @@ int dw_mci_probe(struct dw_mci *host)
>  		}
>  	}
>  
> -	host->vmmc = devm_regulator_get_optional(host->dev, "vmmc");
> -	if (IS_ERR(host->vmmc)) {
> -		ret = PTR_ERR(host->vmmc);
> -		if (ret == -EPROBE_DEFER)
> -			goto err_clk_ciu;
> -
> -		dev_info(host->dev, "no vmmc regulator found: %d\n", ret);
> -		host->vmmc = NULL;
> -	} else {
> -		ret = regulator_enable(host->vmmc);
> -		if (ret) {
> -			if (ret != -EPROBE_DEFER)
> -				dev_err(host->dev,
> -					"regulator_enable fail: %d\n", ret);
> -			goto err_clk_ciu;
> -		}
> -	}
> -
>  	host->quirks = host->pdata->quirks;
>  
>  	spin_lock_init(&host->lock);
> @@ -2630,8 +2645,6 @@ err_workqueue:
>  err_dmaunmap:
>  	if (host->use_dma && host->dma_ops->exit)
>  		host->dma_ops->exit(host);
> -	if (host->vmmc)
> -		regulator_disable(host->vmmc);
>  
>  err_clk_ciu:
>  	if (!IS_ERR(host->ciu_clk))
> @@ -2667,9 +2680,6 @@ void dw_mci_remove(struct dw_mci *host)
>  	if (host->use_dma && host->dma_ops->exit)
>  		host->dma_ops->exit(host);
>  
> -	if (host->vmmc)
> -		regulator_disable(host->vmmc);
> -
>  	if (!IS_ERR(host->ciu_clk))
>  		clk_disable_unprepare(host->ciu_clk);
>  
> @@ -2686,9 +2696,6 @@ EXPORT_SYMBOL(dw_mci_remove);
>   */
>  int dw_mci_suspend(struct dw_mci *host)
>  {
> -	if (host->vmmc)
> -		regulator_disable(host->vmmc);
> -
>  	return 0;
>  }
>  EXPORT_SYMBOL(dw_mci_suspend);
> @@ -2697,15 +2704,6 @@ int dw_mci_resume(struct dw_mci *host)
>  {
>  	int i, ret;
>  
> -	if (host->vmmc) {
> -		ret = regulator_enable(host->vmmc);
> -		if (ret) {
> -			dev_err(host->dev,
> -				"failed to enable regulator: %d\n", ret);
> -			return ret;
> -		}
> -	}
> -
>  	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
>  		ret = -ENODEV;
>  		return ret;
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 29ce014..84e2827 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -188,7 +188,7 @@ struct dw_mci {
>  	/* Workaround flags */
>  	u32			quirks;
>  
> -	struct regulator	*vmmc;	/* Power regulator */
> +	bool			vqmmc_enabled;
>  	unsigned long		irq_flags; /* IRQ flags */
>  	int			irq;
>  };
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux