drivers/usb/phy/phy-samsung-usb3 driver got replaced by drivers/phy/phy-samsung-usb3 one and is no longer used. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> Reviewed-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> Reviewed-by: Jingoo Han <jg1.han@xxxxxxxxxxx> Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx> Cc: Kamil Debski <k.debski@xxxxxxxxxxx> --- drivers/usb/phy/Kconfig | 8 - drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-samsung-usb3.c | 350 ------------------------------------- 3 files changed, 359 deletions(-) delete mode 100644 drivers/usb/phy/phy-samsung-usb3.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 452e252..0cd1f44 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -78,14 +78,6 @@ config SAMSUNG_USBPHY This driver provides common interface to interact, for Samsung USB 2.0 PHY driver and later for Samsung USB 3.0 PHY driver. -config SAMSUNG_USB3PHY - tristate "Samsung USB 3.0 PHY controller Driver" - select SAMSUNG_USBPHY - select USB_PHY - help - Enable this to support Samsung USB 3.0 (Super Speed) phy controller - for samsung SoCs. - config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index c651005..75f2bba 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o -obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c deleted file mode 100644 index cc08192..0000000 --- a/drivers/usb/phy/phy-samsung-usb3.c +++ /dev/null @@ -1,350 +0,0 @@ -/* linux/drivers/usb/phy/phy-samsung-usb3.c - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> - * - * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/usb/samsung_usb_phy.h> -#include <linux/platform_data/samsung-usbphy.h> - -#include "phy-samsung-usb.h" - -/* - * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core. - */ -static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy) -{ - u32 reg; - u32 refclk; - - refclk = sphy->ref_clk_freq; - - reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | - PHYCLKRST_FSEL(refclk); - - switch (refclk) { - case FSEL_CLKSEL_50M: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); - break; - case FSEL_CLKSEL_20M: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x00)); - break; - case FSEL_CLKSEL_19200K: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); - break; - case FSEL_CLKSEL_24M: - default: - reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | - PHYCLKRST_SSC_REFCLKSEL(0x88)); - break; - } - - return reg; -} - -static void samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyparam0; - u32 phyparam1; - u32 linksystem; - u32 phybatchg; - u32 phytest; - u32 phyclkrst; - - /* Reset USB 3.0 PHY */ - writel(0x0, regs + EXYNOS5_DRD_PHYREG0); - - phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0); - /* Select PHY CLK source */ - phyparam0 &= ~PHYPARAM0_REF_USE_PAD; - /* Set Loss-of-Signal Detector sensitivity */ - phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK; - phyparam0 |= PHYPARAM0_REF_LOSLEVEL; - writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0); - - writel(0x0, regs + EXYNOS5_DRD_PHYRESUME); - - /* - * Setting the Frame length Adj value[6:1] to default 0x20 - * See xHCI 1.0 spec, 5.2.4 - */ - linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL | - LINKSYSTEM_FLADJ(0x20); - writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM); - - phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1); - /* Set Tx De-Emphasis level */ - phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - phyparam1 |= PHYPARAM1_PCS_TXDEEMPH; - writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1); - - phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG); - phybatchg |= PHYBATCHG_UTMI_CLKSEL; - writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG); - - /* PHYTEST POWERDOWN Control */ - phytest = readl(regs + EXYNOS5_DRD_PHYTEST); - phytest &= ~(PHYTEST_POWERDOWN_SSP | - PHYTEST_POWERDOWN_HSP); - writel(phytest, regs + EXYNOS5_DRD_PHYTEST); - - /* UTMI Power Control */ - writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI); - - phyclkrst = samsung_usb3phy_set_refclk(sphy); - - phyclkrst |= PHYCLKRST_PORTRESET | - /* Digital power supply in normal operating mode */ - PHYCLKRST_RETENABLEN | - /* Enable ref clock for SS function */ - PHYCLKRST_REF_SSP_EN | - /* Enable spread spectrum */ - PHYCLKRST_SSC_EN | - /* Power down HS Bias and PLL blocks in suspend mode */ - PHYCLKRST_COMMONONN; - - writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); - - udelay(10); - - phyclkrst &= ~(PHYCLKRST_PORTRESET); - writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); -} - -static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy) -{ - u32 phyutmi; - u32 phyclkrst; - u32 phytest; - void __iomem *regs = sphy->regs; - - phyutmi = PHYUTMI_OTGDISABLE | - PHYUTMI_FORCESUSPEND | - PHYUTMI_FORCESLEEP; - writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI); - - /* Resetting the PHYCLKRST enable bits to reduce leakage current */ - phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST); - phyclkrst &= ~(PHYCLKRST_REF_SSP_EN | - PHYCLKRST_SSC_EN | - PHYCLKRST_COMMONONN); - writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); - - /* Control PHYTEST to remove leakage current */ - phytest = readl(regs + EXYNOS5_DRD_PHYTEST); - phytest |= (PHYTEST_POWERDOWN_SSP | - PHYTEST_POWERDOWN_HSP); - writel(phytest, regs + EXYNOS5_DRD_PHYTEST); -} - -static int samsung_usb3phy_init(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - unsigned long flags; - int ret = 0; - - sphy = phy_to_sphy(phy); - - /* Enable the phy clock */ - ret = clk_prepare_enable(sphy->clk); - if (ret) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return ret; - } - - spin_lock_irqsave(&sphy->lock, flags); - - /* setting default phy-type for USB 3.0 */ - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - - /* Disable phy isolation */ - if (sphy->drv_data->set_isolation) - sphy->drv_data->set_isolation(sphy, false); - - /* Initialize usb phy registers */ - sphy->drv_data->phy_enable(sphy); - - spin_unlock_irqrestore(&sphy->lock, flags); - - /* Disable the phy clock */ - clk_disable_unprepare(sphy->clk); - - return ret; -} - -/* - * The function passed to the usb driver for phy shutdown - */ -static void samsung_usb3phy_shutdown(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - unsigned long flags; - - sphy = phy_to_sphy(phy); - - if (clk_prepare_enable(sphy->clk)) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return; - } - - spin_lock_irqsave(&sphy->lock, flags); - - /* setting default phy-type for USB 3.0 */ - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - - /* De-initialize usb phy registers */ - sphy->drv_data->phy_disable(sphy); - - /* Enable phy isolation */ - if (sphy->drv_data->set_isolation) - sphy->drv_data->set_isolation(sphy, true); - - spin_unlock_irqrestore(&sphy->lock, flags); - - clk_disable_unprepare(sphy->clk); -} - -static int samsung_usb3phy_probe(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy; - struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev); - struct device *dev = &pdev->dev; - struct resource *phy_mem; - void __iomem *phy_base; - struct clk *clk; - int ret; - - phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - phy_base = devm_ioremap_resource(dev, phy_mem); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); - if (!sphy) - return -ENOMEM; - - clk = devm_clk_get(dev, "usbdrd30"); - if (IS_ERR(clk)) { - dev_err(dev, "Failed to get device clock\n"); - return PTR_ERR(clk); - } - - sphy->dev = dev; - - if (dev->of_node) { - ret = samsung_usbphy_parse_dt(sphy); - if (ret < 0) - return ret; - } else { - if (!pdata) { - dev_err(dev, "no platform data specified\n"); - return -EINVAL; - } - } - - sphy->plat = pdata; - sphy->regs = phy_base; - sphy->clk = clk; - sphy->phy.dev = sphy->dev; - sphy->phy.label = "samsung-usb3phy"; - sphy->phy.type = USB_PHY_TYPE_USB3; - sphy->phy.init = samsung_usb3phy_init; - sphy->phy.shutdown = samsung_usb3phy_shutdown; - sphy->drv_data = samsung_usbphy_get_driver_data(pdev); - - sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); - if (sphy->ref_clk_freq < 0) - return -EINVAL; - - spin_lock_init(&sphy->lock); - - platform_set_drvdata(pdev, sphy); - - return usb_add_phy_dev(&sphy->phy); -} - -static int samsung_usb3phy_remove(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy = platform_get_drvdata(pdev); - - usb_remove_phy(&sphy->phy); - - if (sphy->pmuregs) - iounmap(sphy->pmuregs); - if (sphy->sysreg) - iounmap(sphy->sysreg); - - return 0; -} - -static struct samsung_usbphy_drvdata usb3phy_exynos5 = { - .cpu_type = TYPE_EXYNOS5250, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12, - .set_isolation = samsung_usbphy_set_isolation_4210, - .phy_enable = samsung_exynos5_usb3phy_enable, - .phy_disable = samsung_exynos5_usb3phy_disable, -}; - -#ifdef CONFIG_OF -static const struct of_device_id samsung_usbphy_dt_match[] = { - { - .compatible = "samsung,exynos5250-usb3phy", - .data = &usb3phy_exynos5 - }, - {}, -}; -MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); -#endif - -static struct platform_device_id samsung_usbphy_driver_ids[] = { - { - .name = "exynos5250-usb3phy", - .driver_data = (unsigned long)&usb3phy_exynos5, - }, - {}, -}; - -MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); - -static struct platform_driver samsung_usb3phy_driver = { - .probe = samsung_usb3phy_probe, - .remove = samsung_usb3phy_remove, - .id_table = samsung_usbphy_driver_ids, - .driver = { - .name = "samsung-usb3phy", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(samsung_usbphy_dt_match), - }, -}; - -module_platform_driver(samsung_usb3phy_driver); - -MODULE_DESCRIPTION("Samsung USB 3.0 phy controller"); -MODULE_AUTHOR("Vivek Gautam <gautam.vivek@xxxxxxxxxxx>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-usb3phy"); -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |