Dear Eduardo,
On 08/20/2014 10:38 PM, edubezval@xxxxxxxxx wrote:
> Hello Chanwoo,
>
> On Tue, Aug 19, 2014 at 7:52 PM, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
>> This patch add support for TRIM_RELOAD feature at Exynos3250. The TMU of
>> Exynos3250 has two TRIMINFO_CON register.
>
> Can you please split the two changes above into two patches? Meaning,
> one that adds TRIMINFO_CON2 and another that adds TRIM_RELOAD?
OK, I'll split this patch as two patches.
>
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
>> Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
>> Cc: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
>> ---
>> Changes from v2:
>> - Fix build break because of missing 'or' operation.
>> Changes from v1:
>> - Add missing 'TMU_SUPPORT_TRIM_RELOAD' feature
>>
>> drivers/thermal/samsung/exynos_tmu.c | 7 +++++--
>> drivers/thermal/samsung/exynos_tmu.h | 5 +++--
>> drivers/thermal/samsung/exynos_tmu_data.c | 11 +++++++++--
>> drivers/thermal/samsung/exynos_tmu_data.h | 7 +++++--
>> 4 files changed, 22 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index acbff14..ed01606 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -164,8 +164,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>> }
>> }
>>
>> - if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
>> - __raw_writel(1, data->base + reg->triminfo_ctrl);
>> + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
>> + for (i = 0; i < pdata->triminfo_reload_count; i++)
>> + __raw_writel(pdata->triminfo_reload[i],
>> + data->base + reg->triminfo_ctrl[i]);
>> + }
>
> What is the logic behind the trim reload feature? Which SoCs support it?
TRIMINFO_CONTROL register has 'RELOAD' field. TMU of Exynos SOC have to set
'RELOAD' field of TRIMINFO_CONTROL register before reading TRIMINFO register.
As I know, Exynos4412/Exynos4212 and Exynos3250 SoC need RELOAD feature.
>
>>
>> if (pdata->cal_mode == HW_MODE)
>> goto skip_calib_data;
>> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
>> index 1b4a644..72cb54e 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.h
>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>> @@ -151,8 +151,7 @@ struct exynos_tmu_registers {
>> u32 triminfo_25_shift;
>> u32 triminfo_85_shift;
>>
>> - u32 triminfo_ctrl;
>> - u32 triminfo_ctrl1;
>> + u32 triminfo_ctrl[2];
>
>
> The above change needs to be documented.
OK, I'll add it.
>
>> u32 triminfo_reload_shift;
>>
>> u32 tmu_ctrl;
>> @@ -295,6 +294,8 @@ struct exynos_tmu_platform_data {
>> u8 second_point_trim;
>> u8 default_temp_offset;
>> u8 test_mux;
>> + u8 triminfo_reload[2];
>> + u8 triminfo_reload_count;
>>
>
> The above addition needs to be documented too.
OK, I'll add it.
>
>> enum calibration_type cal_type;
>> enum calibration_mode cal_mode;
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
>> index aa8e0de..8cd609c 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.c
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
>> @@ -95,6 +95,8 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>> .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>> .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
>> + .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
>> .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>> .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>> .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
>> @@ -160,8 +162,11 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
>> .temp_level = 95, \
>> }, \
>> .freq_tab_count = 2, \
>> + .triminfo_reload[0] = 0x1, \
>> + .triminfo_reload[1] = 0x11, \
>
> What does 0x1 mean? How about 0x11?
The bit of 'RELOAD' field in TRIMINFO_CONTROL register is [0].
and The bit of 'AC Time' field in TRIMINFO_CONTROL register is [5:4].
0x1 means that set RELOAD field.
0x11 means that set RELOAD field and ACTIME field.
>
>> + .triminfo_reload_count = 2, \
>
> What is count?
Just, the number of TRIMINFO_CONTROL registers.
Exynos4412/4212 has only one TRIMINFO_CONTROL register
and Exynos3250 has two TRIMINFO_CONTROL register.
>
>> .registers = &exynos3250_tmu_registers, \
>> - .features = (TMU_SUPPORT_EMULATION | \
>> + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>> TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> TMU_SUPPORT_EMUL_TIME)
>> #endif
>> @@ -184,7 +189,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>> .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
>> .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
>> .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
>> - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
>> + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
>> .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
>> .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
>> .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
>> @@ -252,6 +257,8 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
>> .temp_level = 95, \
>> }, \
>> .freq_tab_count = 2, \
>> + .triminfo_reload[0] = 0x1, \
>> + .triminfo_reload_count = 1, \
>
>
> Your patch description says nothing about TRIM_RELOAD on 4412, does it?
Exynos3250 has two triminfo_control register, existing exynos_tmu_platform_data
don't support Exynos3250 RELOAD feature because the existing exynos_tmu_platform_data
has only one triminfo_control register.
>
> What about the other SoCs?
I has only boards based on Exynos4 and Exynos3250 SoC.
I can't test Exynos5 SoC series.
Best Regards,
Chanwoo Choi
>
>> .registers = &exynos4412_tmu_registers, \
>> .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
>> TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
>> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
>> index f0979e5..e0536c3 100644
>> --- a/drivers/thermal/samsung/exynos_tmu_data.h
>> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
>> @@ -57,8 +57,11 @@
>> #define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
>> #define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
>>
>> -/* Exynos5250 and Exynos4412 specific registers */
>> -#define EXYNOS_TMU_TRIMINFO_CON 0x14
>> +/* Exynos3250 specific registers */
>> +#define EXYNOS_TMU_TRIMINFO_CON1 0x10
>> +
>> +/* Exynos5250, Exynos4412 and Exynos3250 specific registers */
>> +#define EXYNOS_TMU_TRIMINFO_CON2 0x14
>> #define EXYNOS_THD_TEMP_RISE 0x50
>> #define EXYNOS_THD_TEMP_FALL 0x54
>> #define EXYNOS_EMUL_CON 0x80
>> --
>> 1.8.0
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
