On Thursday 14 August 2014 07:55 PM, Bartlomiej Zolnierkiewicz wrote: > drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by > drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung > USB PHY code is no longer used. > > Cc: Kamil Debski <k.debski@xxxxxxxxxxx> > Cc: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> > Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx> > --- > drivers/usb/phy/Kconfig | 7 - > drivers/usb/phy/Makefile | 1 - > drivers/usb/phy/phy-samsung-usb.c | 241 ------------------ > drivers/usb/phy/phy-samsung-usb.h | 349 --------------------------- > include/linux/platform_data/samsung-usbphy.h | 27 --- > 5 files changed, 625 deletions(-) > delete mode 100644 drivers/usb/phy/phy-samsung-usb.c > delete mode 100644 drivers/usb/phy/phy-samsung-usb.h > delete mode 100644 include/linux/platform_data/samsung-usbphy.h > > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index 0cd1f44..7012a82 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -71,13 +71,6 @@ config AM335X_PHY_USB > This driver provides PHY support for that phy which part for the > AM335x SoC. > > -config SAMSUNG_USBPHY > - tristate > - help > - Enable this to support Samsung USB phy helper driver for Samsung SoCs. > - This driver provides common interface to interact, for Samsung USB 2.0 PHY > - driver and later for Samsung USB 3.0 PHY driver. > - > config TWL6030_USB > tristate "TWL6030 USB Transceiver Driver" > depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile > index 75f2bba..1e38a6f 100644 > --- a/drivers/usb/phy/Makefile > +++ b/drivers/usb/phy/Makefile > @@ -14,7 +14,6 @@ obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o > obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o > obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o > obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o > -obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o > obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o > obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o > obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o > diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c > deleted file mode 100644 > index ac025ca..0000000 > --- a/drivers/usb/phy/phy-samsung-usb.c > +++ /dev/null > @@ -1,241 +0,0 @@ > -/* linux/drivers/usb/phy/phy-samsung-usb.c > - * > - * Copyright (c) 2012 Samsung Electronics Co., Ltd. > - * http://www.samsung.com > - * > - * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx> > - * > - * Samsung USB-PHY helper driver with common function calls; > - * interacts with Samsung USB 2.0 PHY controller driver and later > - * with Samsung USB 3.0 PHY driver. > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/clk.h> > -#include <linux/device.h> > -#include <linux/err.h> > -#include <linux/io.h> > -#include <linux/of.h> > -#include <linux/of_address.h> > -#include <linux/usb/samsung_usb_phy.h> > - > -#include "phy-samsung-usb.h" > - > -int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) > -{ > - struct device_node *usbphy_sys; > - > - /* Getting node for system controller interface for usb-phy */ > - usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); > - if (!usbphy_sys) { > - dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); > - return -ENODEV; > - } > - > - sphy->pmuregs = of_iomap(usbphy_sys, 0); > - > - if (sphy->pmuregs == NULL) { > - dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); > - goto err0; > - } > - > - sphy->sysreg = of_iomap(usbphy_sys, 1); > - > - /* > - * Not returning error code here, since this situation is not fatal. > - * Few SoCs may not have this switch available > - */ > - if (sphy->sysreg == NULL) > - dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); > - > - of_node_put(usbphy_sys); > - > - return 0; > - > -err0: > - of_node_put(usbphy_sys); > - return -ENXIO; > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt); > - > -/* > - * Set isolation here for phy. > - * Here 'on = true' would mean USB PHY block is isolated, hence > - * de-activated and vice-versa. > - */ > -void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on) > -{ > - void __iomem *reg = NULL; > - u32 reg_val; > - u32 en_mask = 0; > - > - if (!sphy->pmuregs) { > - dev_warn(sphy->dev, "Can't set pmu isolation\n"); > - return; > - } > - > - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { > - reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset; > - en_mask = sphy->drv_data->devphy_en_mask; > - } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { > - reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset; > - en_mask = sphy->drv_data->hostphy_en_mask; > - } > - > - reg_val = readl(reg); > - > - if (on) > - reg_val &= ~en_mask; > - else > - reg_val |= en_mask; > - > - writel(reg_val, reg); > - > - if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) { > - writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0); > - writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1); > - } > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210); > - > -/* > - * Configure the mode of working of usb-phy here: HOST/DEVICE. > - */ > -void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) > -{ > - u32 reg; > - > - if (!sphy->sysreg) { > - dev_warn(sphy->dev, "Can't configure specified phy mode\n"); > - return; > - } > - > - reg = readl(sphy->sysreg); > - > - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) > - reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; > - else if (sphy->phy_type == USB_PHY_TYPE_HOST) > - reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; > - > - writel(reg, sphy->sysreg); > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel); > - > -/* > - * PHYs are different for USB Device and USB Host. > - * This make sure that correct PHY type is selected before > - * any operation on PHY. > - */ > -int samsung_usbphy_set_type(struct usb_phy *phy, > - enum samsung_usb_phy_type phy_type) > -{ > - struct samsung_usbphy *sphy = phy_to_sphy(phy); > - > - sphy->phy_type = phy_type; > - > - return 0; > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_set_type); > - > -int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy, > - unsigned long rate) > -{ > - unsigned int clksel; > - > - switch (rate) { > - case 12 * MHZ: > - clksel = PHYCLK_CLKSEL_12M; > - break; > - case 24 * MHZ: > - clksel = PHYCLK_CLKSEL_24M; > - break; > - case 48 * MHZ: > - clksel = PHYCLK_CLKSEL_48M; > - break; > - default: > - dev_err(sphy->dev, > - "Invalid reference clock frequency: %lu\n", rate); > - return -EINVAL; > - } > - > - return clksel; > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx); > - > -int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy, > - unsigned long rate) > -{ > - unsigned int clksel; > - > - switch (rate) { > - case 9600 * KHZ: > - clksel = FSEL_CLKSEL_9600K; > - break; > - case 10 * MHZ: > - clksel = FSEL_CLKSEL_10M; > - break; > - case 12 * MHZ: > - clksel = FSEL_CLKSEL_12M; > - break; > - case 19200 * KHZ: > - clksel = FSEL_CLKSEL_19200K; > - break; > - case 20 * MHZ: > - clksel = FSEL_CLKSEL_20M; > - break; > - case 24 * MHZ: > - clksel = FSEL_CLKSEL_24M; > - break; > - case 50 * MHZ: > - clksel = FSEL_CLKSEL_50M; > - break; > - default: > - dev_err(sphy->dev, > - "Invalid reference clock frequency: %lu\n", rate); > - return -EINVAL; > - } > - > - return clksel; > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12); > - > -/* > - * Returns reference clock frequency selection value > - */ > -int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) > -{ > - struct clk *ref_clk; > - unsigned long rate; > - int refclk_freq; > - > - /* > - * In exynos5250 USB host and device PHY use > - * external crystal clock XXTI > - */ > - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) > - ref_clk = clk_get(sphy->dev, "ext_xtal"); > - else > - ref_clk = clk_get(sphy->dev, "xusbxti"); > - if (IS_ERR(ref_clk)) { > - dev_err(sphy->dev, "Failed to get reference clock\n"); > - return PTR_ERR(ref_clk); > - } > - > - rate = clk_get_rate(ref_clk); > - refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate); > - > - clk_put(ref_clk); > - > - return refclk_freq; > -} > -EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq); > diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h > deleted file mode 100644 > index 68771bf..0000000 > --- a/drivers/usb/phy/phy-samsung-usb.h > +++ /dev/null > @@ -1,349 +0,0 @@ > -/* linux/drivers/usb/phy/phy-samsung-usb.h > - * > - * Copyright (c) 2012 Samsung Electronics Co., Ltd. > - * http://www.samsung.com > - * > - * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and > - * OHCI-EXYNOS controllers. > - * > - * This program is free software; you can redistribute it and/or modify > - * it under the terms of the GNU General Public License version 2 as > - * published by the Free Software Foundation. > - * > - * This program is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - */ > - > -#include <linux/usb/phy.h> > - > -/* Register definitions */ > - > -#define SAMSUNG_PHYPWR (0x00) > - > -#define PHYPWR_NORMAL_MASK (0x19 << 0) > -#define PHYPWR_OTG_DISABLE (0x1 << 4) > -#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) > -#define PHYPWR_FORCE_SUSPEND (0x1 << 1) > -/* For Exynos4 */ > -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) > -#define PHYPWR_SLEEP_PHY0 (0x1 << 5) > - > -#define SAMSUNG_PHYCLK (0x04) > - > -#define PHYCLK_MODE_USB11 (0x1 << 6) > -#define PHYCLK_EXT_OSC (0x1 << 5) > -#define PHYCLK_COMMON_ON_N (0x1 << 4) > -#define PHYCLK_ID_PULL (0x1 << 2) > -#define PHYCLK_CLKSEL_MASK (0x3 << 0) > -#define PHYCLK_CLKSEL_48M (0x0 << 0) > -#define PHYCLK_CLKSEL_12M (0x2 << 0) > -#define PHYCLK_CLKSEL_24M (0x3 << 0) > - > -#define SAMSUNG_RSTCON (0x08) > - > -#define RSTCON_PHYLINK_SWRST (0x1 << 2) > -#define RSTCON_HLINK_SWRST (0x1 << 1) > -#define RSTCON_SWRST (0x1 << 0) > - > -/* EXYNOS4X12 */ > -#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04) > -#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08) > - > -#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) > -#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) > -#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) > - > -#define RSTCON_HOSTPHY_SWRST (0xf << 3) > - > -/* EXYNOS5 */ > -#define EXYNOS5_PHY_HOST_CTRL0 (0x00) > - > -#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) > - > -#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) > -#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) > -#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) > -#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) > - > -#define HOST_CTRL0_FSEL_MASK (0x7 << 16) > -#define HOST_CTRL0_FSEL(_x) ((_x) << 16) > - > -#define FSEL_CLKSEL_50M (0x7) > -#define FSEL_CLKSEL_24M (0x5) > -#define FSEL_CLKSEL_20M (0x4) > -#define FSEL_CLKSEL_19200K (0x3) > -#define FSEL_CLKSEL_12M (0x2) > -#define FSEL_CLKSEL_10M (0x1) > -#define FSEL_CLKSEL_9600K (0x0) > - > -#define HOST_CTRL0_TESTBURNIN (0x1 << 11) > -#define HOST_CTRL0_RETENABLE (0x1 << 10) > -#define HOST_CTRL0_COMMONON_N (0x1 << 9) > -#define HOST_CTRL0_SIDDQ (0x1 << 6) > -#define HOST_CTRL0_FORCESLEEP (0x1 << 5) > -#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) > -#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) > -#define HOST_CTRL0_UTMISWRST (0x1 << 2) > -#define HOST_CTRL0_LINKSWRST (0x1 << 1) > -#define HOST_CTRL0_PHYSWRST (0x1 << 0) > - > -#define EXYNOS5_PHY_HOST_TUNE0 (0x04) > - > -#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) > - > -#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) > - > -#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) > - > -#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) > - > -#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) > -#define HSIC_CTRL_REFCLKSEL (0x2 << 23) > - > -#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) > -#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) > -#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) > -#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) > -#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) > -#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) > -#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) > - > -#define HSIC_CTRL_SIDDQ (0x1 << 6) > -#define HSIC_CTRL_FORCESLEEP (0x1 << 5) > -#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) > -#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) > -#define HSIC_CTRL_UTMISWRST (0x1 << 2) > -#define HSIC_CTRL_PHYSWRST (0x1 << 0) > - > -#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) > - > -#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) > -#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) > -#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) > -#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) > - > -#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) > - > -#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) > -#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) > -#define HOST_OHCICTRL_CNTSEL (0x1 << 1) > -#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) > - > -#define EXYNOS5_PHY_OTG_SYS (0x38) > - > -#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) > -#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) > -#define OTG_SYS_PHY0_SWRST (0x1 << 12) > - > -#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) > -#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) > -#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) > -#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) > - > -#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) > -#define OTG_SYS_COMMON_ON (0x1 << 7) > - > -#define OTG_SYS_FSEL_MASK (0x7 << 4) > -#define OTG_SYS_FSEL(_x) ((_x) << 4) > - > -#define OTG_SYS_FORCESLEEP (0x1 << 3) > -#define OTG_SYS_OTGDISABLE (0x1 << 2) > -#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) > -#define OTG_SYS_FORCESUSPEND (0x1 << 0) > - > -#define EXYNOS5_PHY_OTG_TUNE (0x40) > - > -/* EXYNOS5: USB 3.0 DRD */ > -#define EXYNOS5_DRD_LINKSYSTEM (0x04) > - > -#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) > -#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) > -#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) > - > -#define EXYNOS5_DRD_PHYUTMI (0x08) > - > -#define PHYUTMI_OTGDISABLE (0x1 << 6) > -#define PHYUTMI_FORCESUSPEND (0x1 << 1) > -#define PHYUTMI_FORCESLEEP (0x1 << 0) > - > -#define EXYNOS5_DRD_PHYPIPE (0x0c) > - > -#define EXYNOS5_DRD_PHYCLKRST (0x10) > - > -#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) > -#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) > - > -#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) > -#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) > - > -#define PHYCLKRST_SSC_EN (0x1 << 20) > -#define PHYCLKRST_REF_SSP_EN (0x1 << 19) > -#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) > - > -#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) > -#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) > -#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) > -#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) > -#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) > -#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) > - > -#define PHYCLKRST_FSEL_MASK (0x3f << 5) > -#define PHYCLKRST_FSEL(_x) ((_x) << 5) > -#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) > -#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) > -#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) > -#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) > - > -#define PHYCLKRST_RETENABLEN (0x1 << 4) > - > -#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) > -#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) > -#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) > - > -#define PHYCLKRST_PORTRESET (0x1 << 1) > -#define PHYCLKRST_COMMONONN (0x1 << 0) > - > -#define EXYNOS5_DRD_PHYREG0 (0x14) > -#define EXYNOS5_DRD_PHYREG1 (0x18) > - > -#define EXYNOS5_DRD_PHYPARAM0 (0x1c) > - > -#define PHYPARAM0_REF_USE_PAD (0x1 << 31) > -#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) > -#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) > - > -#define EXYNOS5_DRD_PHYPARAM1 (0x20) > - > -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) > -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) > - > -#define EXYNOS5_DRD_PHYTERM (0x24) > - > -#define EXYNOS5_DRD_PHYTEST (0x28) > - > -#define PHYTEST_POWERDOWN_SSP (0x1 << 3) > -#define PHYTEST_POWERDOWN_HSP (0x1 << 2) > - > -#define EXYNOS5_DRD_PHYADP (0x2c) > - > -#define EXYNOS5_DRD_PHYBATCHG (0x30) > - > -#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) > - > -#define EXYNOS5_DRD_PHYRESUME (0x34) > -#define EXYNOS5_DRD_LINKPORT (0x44) > - > -#ifndef MHZ > -#define MHZ (1000*1000) > -#endif > - > -#ifndef KHZ > -#define KHZ (1000) > -#endif > - > -#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) > -#define S3C64XX_USBPHY_ENABLE (0x1 << 16) > -#define EXYNOS_USBPHY_ENABLE (0x1 << 0) > -#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) > - > -enum samsung_cpu_type { > - TYPE_S3C64XX, > - TYPE_EXYNOS4210, > - TYPE_EXYNOS4X12, > - TYPE_EXYNOS5250, > -}; > - > -struct samsung_usbphy; > - > -/* > - * struct samsung_usbphy_drvdata - driver data for various SoC variants > - * @cpu_type: machine identifier > - * @devphy_en_mask: device phy enable mask for PHY CONTROL register > - * @hostphy_en_mask: host phy enable mask for PHY CONTROL register > - * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from > - * mapped address of system controller. > - * @hostphy_reg_offset: offset to HOST PHY CONTROL register from > - * mapped address of system controller. > - * > - * Here we have a separate mask for device type phy. > - * Having different masks for host and device type phy helps > - * in setting independent masks in case of SoCs like S5PV210, > - * in which PHY0 and PHY1 enable bits belong to same register > - * placed at position 0 and 1 respectively. > - * Although for newer SoCs like exynos these bits belong to > - * different registers altogether placed at position 0. > - */ > -struct samsung_usbphy_drvdata { > - int cpu_type; > - int devphy_en_mask; > - int hostphy_en_mask; > - u32 devphy_reg_offset; > - u32 hostphy_reg_offset; > - int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long); > - void (*set_isolation)(struct samsung_usbphy *, bool); > - void (*phy_enable)(struct samsung_usbphy *); > - void (*phy_disable)(struct samsung_usbphy *); > -}; > - > -/* > - * struct samsung_usbphy - transceiver driver state > - * @phy: transceiver structure > - * @plat: platform data > - * @dev: The parent device supplied to the probe function > - * @clk: usb phy clock > - * @regs: usb phy controller registers memory base > - * @pmuregs: USB device PHY_CONTROL register memory base > - * @sysreg: USB2.0 PHY_CFG register memory base > - * @ref_clk_freq: reference clock frequency selection > - * @drv_data: driver data available for different SoCs > - * @phy_type: Samsung SoCs specific phy types: #HOST > - * #DEVICE > - * @phy_usage: usage count for phy > - * @lock: lock for phy operations > - */ > -struct samsung_usbphy { > - struct usb_phy phy; > - struct samsung_usbphy_data *plat; > - struct device *dev; > - struct clk *clk; > - void __iomem *regs; > - void __iomem *pmuregs; > - void __iomem *sysreg; > - int ref_clk_freq; > - const struct samsung_usbphy_drvdata *drv_data; > - enum samsung_usb_phy_type phy_type; > - atomic_t phy_usage; > - spinlock_t lock; > -}; > - > -#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) > - > -static const struct of_device_id samsung_usbphy_dt_match[]; > - > -static inline const struct samsung_usbphy_drvdata > -*samsung_usbphy_get_driver_data(struct platform_device *pdev) > -{ > - if (pdev->dev.of_node) { > - const struct of_device_id *match; > - match = of_match_node(samsung_usbphy_dt_match, > - pdev->dev.of_node); > - return match->data; > - } > - > - return (struct samsung_usbphy_drvdata *) > - platform_get_device_id(pdev)->driver_data; > -} > - > -extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy); > -extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, > - bool on); > -extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy); > -extern int samsung_usbphy_set_type(struct usb_phy *phy, > - enum samsung_usb_phy_type phy_type); > -extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy); > -extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy, > - unsigned long rate); > -extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy, > - unsigned long rate); > diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h > deleted file mode 100644 > index 1bd24cb..0000000 > --- a/include/linux/platform_data/samsung-usbphy.h > +++ /dev/null > @@ -1,27 +0,0 @@ > -/* > - * Copyright (C) 2012 Samsung Electronics Co.Ltd > - * http://www.samsung.com/ > - * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx> > - * > - * Defines platform data for samsung usb phy driver. > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > - */ > - > -#ifndef __SAMSUNG_USBPHY_PLATFORM_H > -#define __SAMSUNG_USBPHY_PLATFORM_H > - > -/** > - * samsung_usbphy_data - Platform data for USB PHY driver. > - * @pmu_isolation: Function to control usb phy isolation in PMU. > - */ > -struct samsung_usbphy_data { > - void (*pmu_isolation)(int on); > -}; > - > -extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); > - > -#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |