Re: [PATCH v3 1/2] ARM: EXYNOS: Move Disabling of JPEG USE_RETENTION for exynos5250 to pmu.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On Mon, Aug 18, 2014 at 5:42 PM, Tomasz Figa <tomasz.figa@xxxxxxxxx> wrote:
> Hi Vikas,
>
> On 07.08.2014 13:59, Vikas Sajjan wrote:
>> Move the Disabling of JPEG USE_RETENTION for exynos5250 to pmu.c to make way for
>> refactoring of pm.c and to create common functions across exynos4 and
>> exynos5250.
>>
>> Signed-off-by: Vikas Sajjan <vikas.sajjan@xxxxxxxxxxx>
>> ---
>>  arch/arm/mach-exynos/pm.c  |    7 +------
>>  arch/arm/mach-exynos/pmu.c |    6 ++++++
>>  2 files changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
>> index c4c6d98..fdd68c2 100644
>> --- a/arch/arm/mach-exynos/pm.c
>> +++ b/arch/arm/mach-exynos/pm.c
>> @@ -265,13 +265,8 @@ static void exynos_pm_prepare(void)
>>
>>       s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
>>
>> -     if (soc_is_exynos5250()) {
>> +     if (soc_is_exynos5250())
>>               s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
>> -             /* Disable USE_RETENTION of JPEG_MEM_OPTION */
>> -             tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
>> -             tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
>> -             pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
>> -     }
>>
>>       /* Set value of power down register for sleep mode */
>>
>> diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
>> index ff9d23f..6021adb 100644
>> --- a/arch/arm/mach-exynos/pmu.c
>> +++ b/arch/arm/mach-exynos/pmu.c
>> @@ -389,6 +389,7 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
>>  static int __init exynos_pmu_init(void)
>>  {
>>       unsigned int value;
>> +     unsigned int tmp;
>>
>>       exynos_pmu_config = exynos4210_pmu_config;
>>
>> @@ -411,6 +412,11 @@ static int __init exynos_pmu_init(void)
>>               value &= ~EXYNOS5_SYS_WDTRESET;
>>               pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
>>
>> +             /* Disable USE_RETENTION of JPEG_MEM_OPTION */
>> +             tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
>> +             tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
>> +             pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
>> +
>
> Note that this code is executed once at system bootup. Is this register
> preserved across a suspend/resume cycle?
>
> Anyway, what I suggested in my comment to previous revision of this
> series was stuffing this thing into the PMU configuration array. As you
> can see in the arrays for Exynos4 SoCs, they just hardcode the
> MEM_OPTION registers to constant values, because I believe the only
> field from those registers with non-zero value in practice is
> EXYNOS5_OPTION_USE_RETENTION (or 0x10 used directly in PMU arrays for
> Exynos4 SoCs). This would also cover my comment above, because the
> arrays are written to the PMU every time a low power state is being entered.
>

Is this what you meant,

diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 6021adb..67b70fd 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -264,6 +264,7 @@ static const struct exynos_pmu_conf
exynos5250_pmu_config[] = {
        { EXYNOS5_INTRAM_MEM_SYS_PWR_REG,               { 0x3, 0x0, 0x0} },
        { EXYNOS5_INTROM_MEM_SYS_PWR_REG,               { 0x3, 0x0, 0x0} },
        { EXYNOS5_JPEG_MEM_SYS_PWR_REG,                 { 0x3, 0x0, 0x0} },
+       { EXYNOS5_JPEG_MEM_OPTION,                      { 0x10, 0x10, 0x0} },
        { EXYNOS5_HSI_MEM_SYS_PWR_REG,                  { 0x3, 0x0, 0x0} },
        { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,               { 0x3, 0x0, 0x0} },
        { EXYNOS5_SATA_MEM_SYS_PWR_REG,                 { 0x3, 0x0, 0x0} },
@@ -412,11 +413,6 @@ static int __init exynos_pmu_init(void)
                value &= ~EXYNOS5_SYS_WDTRESET;
                pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);

-               /* Disable USE_RETENTION of JPEG_MEM_OPTION */
-               tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
-               tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
-               pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
-
                exynos_pmu_config = exynos5250_pmu_config;
                pr_info("EXYNOS5250 PMU Initialize\n");
        } else {

for AFTR and LPA mode, i still maintain 0x10 like any other
XXX_XXX_MEM_OPTION register,
but for sleep mode, I am disabling USE_RETENTION of JPEG_MEM_OPTION as required.


Hope this is fine.

I tested with the above change on snow, S2R works well.



> Best regards,
> Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux