drivers/usb/phy/phy-samsung-usb2 driver got replaced by drivers/phy/phy-samsung-usb2 one and is no longer used. Cc: Kamil Debski <k.debski@xxxxxxxxxxx> Cc: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- drivers/usb/phy/Kconfig | 8 - drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-samsung-usb2.c | 541 ------------------------------------- 3 files changed, 550 deletions(-) delete mode 100644 drivers/usb/phy/phy-samsung-usb2.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index e253fa0..452e252 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -78,14 +78,6 @@ config SAMSUNG_USBPHY This driver provides common interface to interact, for Samsung USB 2.0 PHY driver and later for Samsung USB 3.0 PHY driver. -config SAMSUNG_USB2PHY - tristate "Samsung USB 2.0 PHY controller Driver" - select SAMSUNG_USBPHY - select USB_PHY - help - Enable this to support Samsung USB 2.0 (High Speed) PHY controller - driver for Samsung SoCs. - config SAMSUNG_USB3PHY tristate "Samsung USB 3.0 PHY controller Driver" select SAMSUNG_USBPHY diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 24a9133..c651005 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o -obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c deleted file mode 100644 index b3ba866..0000000 --- a/drivers/usb/phy/phy-samsung-usb2.c +++ /dev/null @@ -1,541 +0,0 @@ -/* linux/drivers/usb/phy/phy-samsung-usb2.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx> - * - * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and - * OHCI-EXYNOS controllers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/usb/otg.h> -#include <linux/usb/samsung_usb_phy.h> -#include <linux/platform_data/samsung-usbphy.h> - -#include "phy-samsung-usb.h" - -static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!otg->host) - otg->host = host; - - return 0; -} - -static bool exynos5_phyhost_is_on(void __iomem *regs) -{ - u32 reg; - - reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - return !(reg & HOST_CTRL0_SIDDQ); -} - -static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyclk = sphy->ref_clk_freq; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - u32 ehcictrl; - u32 ohcictrl; - - /* - * phy_usage helps in keeping usage count for phy - * so that the first consumer enabling the phy is also - * the last consumer to disable it. - */ - - atomic_inc(&sphy->phy_usage); - - if (exynos5_phyhost_is_on(regs)) { - dev_info(sphy->dev, "Already power on PHY\n"); - return; - } - - /* Host configuration */ - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - /* phy reference clock configuration */ - phyhost &= ~HOST_CTRL0_FSEL_MASK; - phyhost |= HOST_CTRL0_FSEL(phyclk); - - /* host phy reset */ - phyhost &= ~(HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL | - HOST_CTRL0_SIDDQ | - /* Enable normal mode of operation */ - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP); - - /* Link reset */ - phyhost |= (HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST | - /* COMMON Block configuration during suspend */ - HOST_CTRL0_COMMONON_N); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - udelay(10); - phyhost &= ~(HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - /* OTG configuration */ - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - - /* phy reference clock configuration */ - phyotg &= ~OTG_SYS_FSEL_MASK; - phyotg |= OTG_SYS_FSEL(phyclk); - - /* Enable normal mode of operation */ - phyotg &= ~(OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP | - OTG_SYS_REFCLKSEL_MASK | - /* COMMON Block configuration during suspend */ - OTG_SYS_COMMON_ON); - - /* OTG phy & link reset */ - phyotg |= (OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET | - OTG_SYS_OTGDISABLE | - /* Set phy refclk */ - OTG_SYS_REFCLKSEL_CLKCORE); - - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - udelay(10); - phyotg &= ~(OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - - /* HSIC phy configuration */ - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_PHYSWRST); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - udelay(10); - phyhsic &= ~HSIC_CTRL_PHYSWRST; - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - udelay(80); - - /* enable EHCI DMA burst */ - ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); - ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | - HOST_EHCICTRL_ENAINCR4 | - HOST_EHCICTRL_ENAINCR8 | - HOST_EHCICTRL_ENAINCR16); - writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); - - /* set ohci_suspend_on_n */ - ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); - ohcictrl |= HOST_OHCICTRL_SUSPLGCY; - writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); -} - -static void samsung_usb2phy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - u32 phyclk; - u32 rstcon; - - /* set clock frequency for PLL */ - phyclk = sphy->ref_clk_freq; - phypwr = readl(regs + SAMSUNG_PHYPWR); - rstcon = readl(regs + SAMSUNG_RSTCON); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phyclk &= ~PHYCLK_COMMON_ON_N; - phypwr &= ~PHYPWR_NORMAL_MASK; - rstcon |= RSTCON_SWRST; - break; - case TYPE_EXYNOS4X12: - phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 | - PHYPWR_NORMAL_MASK_HSIC1 | - PHYPWR_NORMAL_MASK_PHY1); - rstcon |= RSTCON_HOSTPHY_SWRST; - case TYPE_EXYNOS4210: - phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; - rstcon |= RSTCON_SWRST; - default: - break; - } - - writel(phyclk, regs + SAMSUNG_PHYCLK); - /* Configure PHY0 for normal operation*/ - writel(phypwr, regs + SAMSUNG_PHYPWR); - /* reset all ports of PHY and Link */ - writel(rstcon, regs + SAMSUNG_RSTCON); - udelay(10); - if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) - rstcon &= ~RSTCON_HOSTPHY_SWRST; - rstcon &= ~RSTCON_SWRST; - writel(rstcon, regs + SAMSUNG_RSTCON); -} - -static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - - if (atomic_dec_return(&sphy->phy_usage) > 0) { - dev_info(sphy->dev, "still being used\n"); - return; - } - - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_SIDDQ | - HSIC_CTRL_FORCESLEEP | - HSIC_CTRL_FORCESUSPEND); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - phyhost |= (HOST_CTRL0_SIDDQ | - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP | - HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - phyotg |= (OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); -} - -static void samsung_usb2phy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - - phypwr = readl(regs + SAMSUNG_PHYPWR); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phypwr |= PHYPWR_NORMAL_MASK; - break; - case TYPE_EXYNOS4X12: - phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 | - PHYPWR_NORMAL_MASK_HSIC1 | - PHYPWR_NORMAL_MASK_PHY1); - case TYPE_EXYNOS4210: - phypwr |= PHYPWR_NORMAL_MASK_PHY0; - default: - break; - } - - /* Disable analog and otg block power */ - writel(phypwr, regs + SAMSUNG_PHYPWR); -} - -/* - * The function passed to the usb driver for phy initialization - */ -static int samsung_usb2phy_init(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - int ret = 0; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - /* Enable the phy clock */ - ret = clk_prepare_enable(sphy->clk); - if (ret) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return ret; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* Disable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(false); - else if (sphy->drv_data->set_isolation) - sphy->drv_data->set_isolation(sphy, false); - - /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ - samsung_usbphy_cfg_sel(sphy); - - /* Initialize usb phy registers */ - sphy->drv_data->phy_enable(sphy); - - spin_unlock_irqrestore(&sphy->lock, flags); - - /* Disable the phy clock */ - clk_disable_unprepare(sphy->clk); - - return ret; -} - -/* - * The function passed to the usb driver for phy shutdown - */ -static void samsung_usb2phy_shutdown(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - if (clk_prepare_enable(sphy->clk)) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* De-initialize usb phy registers */ - sphy->drv_data->phy_disable(sphy); - - /* Enable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(true); - else if (sphy->drv_data->set_isolation) - sphy->drv_data->set_isolation(sphy, true); - - spin_unlock_irqrestore(&sphy->lock, flags); - - clk_disable_unprepare(sphy->clk); -} - -static int samsung_usb2phy_probe(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy; - struct usb_otg *otg; - struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev); - const struct samsung_usbphy_drvdata *drv_data; - struct device *dev = &pdev->dev; - struct resource *phy_mem; - void __iomem *phy_base; - struct clk *clk; - int ret; - - phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - phy_base = devm_ioremap_resource(dev, phy_mem); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); - if (!sphy) - return -ENOMEM; - - otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - drv_data = samsung_usbphy_get_driver_data(pdev); - - if (drv_data->cpu_type == TYPE_EXYNOS5250) - clk = devm_clk_get(dev, "usbhost"); - else - clk = devm_clk_get(dev, "otg"); - - if (IS_ERR(clk)) { - dev_err(dev, "Failed to get usbhost/otg clock\n"); - return PTR_ERR(clk); - } - - sphy->dev = dev; - - if (dev->of_node) { - ret = samsung_usbphy_parse_dt(sphy); - if (ret < 0) - return ret; - } else { - if (!pdata) { - dev_err(dev, "no platform data specified\n"); - return -EINVAL; - } - } - - sphy->plat = pdata; - sphy->regs = phy_base; - sphy->clk = clk; - sphy->drv_data = drv_data; - sphy->phy.dev = sphy->dev; - sphy->phy.label = "samsung-usb2phy"; - sphy->phy.type = USB_PHY_TYPE_USB2; - sphy->phy.init = samsung_usb2phy_init; - sphy->phy.shutdown = samsung_usb2phy_shutdown; - - sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); - if (sphy->ref_clk_freq < 0) - return -EINVAL; - - sphy->phy.otg = otg; - sphy->phy.otg->phy = &sphy->phy; - sphy->phy.otg->set_host = samsung_usbphy_set_host; - - spin_lock_init(&sphy->lock); - - platform_set_drvdata(pdev, sphy); - - return usb_add_phy_dev(&sphy->phy); -} - -static int samsung_usb2phy_remove(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy = platform_get_drvdata(pdev); - - usb_remove_phy(&sphy->phy); - - if (sphy->pmuregs) - iounmap(sphy->pmuregs); - if (sphy->sysreg) - iounmap(sphy->sysreg); - - return 0; -} - -static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = { - .cpu_type = TYPE_S3C64XX, - .devphy_en_mask = S3C64XX_USBPHY_ENABLE, - .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx, - .set_isolation = NULL, /* TODO */ - .phy_enable = samsung_usb2phy_enable, - .phy_disable = samsung_usb2phy_disable, -}; - -static const struct samsung_usbphy_drvdata usb2phy_exynos4 = { - .cpu_type = TYPE_EXYNOS4210, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx, - .set_isolation = samsung_usbphy_set_isolation_4210, - .phy_enable = samsung_usb2phy_enable, - .phy_disable = samsung_usb2phy_disable, -}; - -static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = { - .cpu_type = TYPE_EXYNOS4X12, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12, - .set_isolation = samsung_usbphy_set_isolation_4210, - .phy_enable = samsung_usb2phy_enable, - .phy_disable = samsung_usb2phy_disable, -}; - -static struct samsung_usbphy_drvdata usb2phy_exynos5 = { - .cpu_type = TYPE_EXYNOS5250, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, - .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12, - .set_isolation = samsung_usbphy_set_isolation_4210, - .phy_enable = samsung_exynos5_usb2phy_enable, - .phy_disable = samsung_exynos5_usb2phy_disable, -}; - -#ifdef CONFIG_OF -static const struct of_device_id samsung_usbphy_dt_match[] = { - { - .compatible = "samsung,s3c64xx-usb2phy", - .data = &usb2phy_s3c64xx, - }, { - .compatible = "samsung,exynos4210-usb2phy", - .data = &usb2phy_exynos4, - }, { - .compatible = "samsung,exynos4x12-usb2phy", - .data = &usb2phy_exynos4x12, - }, { - .compatible = "samsung,exynos5250-usb2phy", - .data = &usb2phy_exynos5 - }, - {}, -}; -MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); -#endif - -static struct platform_device_id samsung_usbphy_driver_ids[] = { - { - .name = "s3c64xx-usb2phy", - .driver_data = (unsigned long)&usb2phy_s3c64xx, - }, { - .name = "exynos4210-usb2phy", - .driver_data = (unsigned long)&usb2phy_exynos4, - }, { - .name = "exynos4x12-usb2phy", - .driver_data = (unsigned long)&usb2phy_exynos4x12, - }, { - .name = "exynos5250-usb2phy", - .driver_data = (unsigned long)&usb2phy_exynos5, - }, - {}, -}; - -MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); - -static struct platform_driver samsung_usb2phy_driver = { - .probe = samsung_usb2phy_probe, - .remove = samsung_usb2phy_remove, - .id_table = samsung_usbphy_driver_ids, - .driver = { - .name = "samsung-usb2phy", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(samsung_usbphy_dt_match), - }, -}; - -module_platform_driver(samsung_usb2phy_driver); - -MODULE_DESCRIPTION("Samsung USB 2.0 phy controller"); -MODULE_AUTHOR("Praveen Paneri <p.paneri@xxxxxxxxxxx>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-usb2phy"); -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |