Andreas, On Sat, Aug 2, 2014 at 3:25 AM, Andreas Färber <afaerber@xxxxxxx> wrote: > Hi, > > Am 02.08.2014 06:57, schrieb Doug Anderson: >> On Fri, Aug 1, 2014 at 7:34 PM, Javier Martinez Canillas >> <javier.martinez@xxxxxxxxxxxxxxx> wrote: >>> On 08/02/2014 02:52 AM, Andreas Färber wrote: >>>> >>>> Based on the preinstalled 3.8 based ChromeOS kernel and previous 3.15 >>>> based attempts by Stephan and me that broke for 3.16, I've prepared a >>>> device tree for the HP Chromebook 11 aka Google Spring. >>>> >>>> v6 renames a node and reverts dp_hpd. >>>> >>>> Not yet enabled are trackpad, Wifi and sound. >>> >>> I made a comment on patch 05/10 but the rest of the series looks good to me. So >>> for the remaining patches: >>> >>> Reviewed-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> >>> >>> NOTE: I thought that Tomasz Figa gave you his Reviewed-by on v5 for the whole >>> series as well but I didn't see his tag on the v6 patches. >> >> Yes, I thought that too. I assume he's OK with the small changes you >> made between v5 and v6. In the very least his Reviewed-by could be >> present on the patches that didn't change between the last two revs. > > I did add it to the bootargs, GPIO, USB3503 patches. All other patches > were either split off or slightly changed due to dp_hpd[_gpio], so I > didn't carry it over. > >> Given Javier's review and Tomasz's review and Vincent's comments, I'll >> probably skip all the work of reviewing the rest of the series unless >> someone really wants me to. ;) > > Could you maybe give an Rb or Ab for the actual Spring patch to have the > Cc: updated? :) Done. > Note that if there's some problem that can't be resolved by selectively > dropping patches, I won't be available next week, so you'll either have > to provide fixups for Kukjin to squash or wait till I've returned. > > One thing I've wondered is whether we should put status = "disabled" on > the dp node with some comment, since it's known not to work as is (but > better having the data here than leaving it out, I believe). Don't know about this one. > Of course if either of you has input on the discussions on the drm > bridge/panel series V6 [1] for how to enable non-simplefb display and > iommus, that would be valuable. I've been letting the graphics folks and Samsung hash out the graphics patches, so I don't think I'll be much help here. > [1] http://www.spinics.net/lists/linux-samsung-soc/msg35274.html > > > And when one thing is accomplished, I am always quick to look forward: > > I've taken a quick look at sound nodes: According to 3.8 DT, Spring uses > max98089 whereas Snow has 98091, so different codec driver and still > lacking DT binding support. I might look into trivially enabling > sound/soc/codecs/max98089.c through a "maxim,max98089" OF match table > once this series lands in linux-next. As for the driver, can we reuse > http://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/tree/sound/soc/samsung/snow.c?h=for-next > with a "google,spring-audio-max98089", or are code changes needed? I don't know this offhand. > Both of you mentioned limitations of cros_ec i2c passthrough leading to > a forked tps65090 driver downstream - I don't think I can be of help > there, as I guess simply copying a driver will not be an option. ;) > https://code.google.com/p/chromium/issues/detail?id=391797 Yup, I think this will be real work for someone. I made a quick attempt and failed at it and I haven't had time to work on it since (and don't necessarily expect to have time in the near future)... I think it is possible for anyone versed in i2c to figure this out based on what I already posted and what's in our local tree... > For the touchpad it seems DT support has landed in the input tree as > "atmel,maxtouch". Backporting just that patch does not make it work > though. (Tried the rejected pinctrl approach to be on the safe side.) > https://code.google.com/p/chromium/issues/detail?id=371114 > https://patchwork.kernel.org/patch/3976801/ This is the same work as needed for pit and pi, I believe. Perhaps Javier or Dmitry has this on their todo list? > I thought the internal xhci would have the webcam on it, but I don't see > it in lsusb. Does that need some pinctrl or tps65090 regulator? Once > appearing on a bus, which driver config option will it need? Perhaps tps65090 FET5? That looks like what the device tree says in our local tree. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |