Am 02.08.2014 14:56, schrieb Tomasz Figa:
> On 02.08.2014 14:21, Tomasz Figa wrote:
>> On 02.08.2014 02:52, Andreas Färber wrote:
>>> Use the new style of referencing inherited nodes and use symbolic names.
>>> Reorder one pinctrl node in GPIO order.
>>>
>>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>>
>>> Suggested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>>> Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>>> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
>>> ---
>>> v5 -> v6:
>>> * Split off label additions (Doug Anderson)
>>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>>
>>> v4 -> v5:
>>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>>> * Use IRQ_TYPE_* constants
>>> * Use some more GPIO_ACTIVE_*
>>>
>>> v3 -> v4: Unchanged
>>>
>>> v3: New (Doug Anderson)
>>>
>>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>>> 1 file changed, 145 insertions(+), 146 deletions(-)
>>
>> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> Just for convenience of other reviewers, here are actual changes done do
> the device tree after compiling into dtb and then back into dts:
Erm, to not confuse reviewers, this must be over the whole series:
>> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
>> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
>> @@ -8,6 +8,7 @@
>> model = "Google Snow";
>>
>> chosen {
>> + bootargs = "console=tty1";
>> };
>>
>> aliases {
This is optional follow-on patch 05/10.
>> @@ -829,15 +830,6 @@
>> phandle = <0x44>;
>> };
>>
>> - hdmi-hpd-irq {
>> - samsung,pins = "gpx3-7";
>> - samsung,pin-function = <0x0>;
>> - samsung,pin-pud = <0x1>;
>> - samsung,pin-drv = <0x0>;
>> - linux,phandle = <0x33>;
>> - phandle = <0x33>;
>> - };
>> -
>> max77686-irq {
>> samsung,pins = "gpx3-2";
>> samsung,pin-function = <0x0>;
>> @@ -846,6 +838,15 @@
>> linux,phandle = <0xe>;
>> phandle = <0xe>;
>> };
>> +
>> + hdmi-hpd-irq {
>> + samsung,pins = "gpx3-7";
>> + samsung,pin-function = <0x0>;
>> + samsung,pin-pud = <0x1>;
>> + samsung,pin-drv = <0x0>;
>> + linux,phandle = <0x33>;
>> + phandle = <0x33>;
>> + };
>> };
>>
>> pinctrl@13400000 {
This is this patch 04/10. Just a movement.
>> @@ -1703,12 +1704,12 @@
>> samsung,dw-mshc-ciu-div = <0x3>;
>> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
>> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <0x27 0x28 0x29>;
>>
>> slot@0 {
>> reg = <0x0>;
>> bus-width = <0x4>;
>> - pinctrl-names = "default";
>> - pinctrl-0 = <0x27 0x28 0x29>;
>> };
>> };
>>
This is preceding patch 01/10.
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
