Hi,
Am 31.07.2014 19:00, schrieb Vincent Palatin:
> Always a bit late to the game.
> One small comment inline.
>
> Reviewed-by: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
Thanks,
>
> On Thu, Jul 31, 2014 at 9:08 AM, Andreas Färber <afaerber@xxxxxxx> wrote:
>> + usb3_vbus_reg: regulator-usb3 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "P5.0V_USB3CON";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpio = <&gpe1 0 GPIO_ACTIVE_LOW>;
>> + enable-active-high;
>> + };
>
> GPE1_0 GPIO is the HSIC hub (SMSC 3503) reset# line (already defined
> below afaik).
Yes, that was a suggestion you made on v1.
> On this design there is no external USB3 port, so no VBUS reg/load
> switch for USB3.
Could you be a little clearer? Are you suggesting to drop the gpio
property? I just re-tested that without the regulator node plus the
vbus-supply below I don't get any USB2 (so maybe rename the regulator?).
Regards,
Andreas
>> +
>> + usb@12110000 {
>> + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + usb-hub {
>> + compatible = "smsc,usb3503a";
>> + reset-gpios = <&hsic_reset>;
>> + };
[...]
>> +&usbdrd_phy {
>> + vbus-supply = <&usb3_vbus_reg>;
>> +};
>> +
>> +#include "cros-ec-keyboard.dtsi"
>> --
>> 1.9.3
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
