Jaehoon,
On Wed, Jul 30, 2014 at 4:05 AM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index d0de1f5..42a3590 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -401,7 +401,6 @@
> mmc_0: mmc@12200000 {
> status = "okay";
> num-slots = <1>;
> - supports-highspeed;
> broken-cd;
> card-detect-delay = <200>;
> samsung,dw-mshc-ciu-div = <3>;
> @@ -410,17 +409,13 @@
> vmmc-supply = <&mmc_reg>;
> pinctrl-names = "default";
> pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> -
> - slot@0 {
> - reg = <0>;
> - bus-width = <8>;
> - };
> + bus-width = <8>;
> + cap-mmc-highspeed;
> };
>
> mmc_2: mmc@12220000 {
> status = "okay";
> num-slots = <1>;
> - supports-highspeed;
> card-detect-delay = <200>;
> samsung,dw-mshc-ciu-div = <3>;
> samsung,dw-mshc-sdr-timing = <2 3>;
> @@ -428,12 +423,9 @@
> vmmc-supply = <&mmc_reg>;
> pinctrl-names = "default";
> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> -
> - slot@0 {
> - reg = <0>;
> - bus-width = <4>;
> - disable-wp;
> - };
> + bus-width = <4>;
> + disable-wp;
> + cap-sd-highspeed;
It seems like you ought to include cap-mmc-highspeed in addition to
cap-sd-highspeed, but I could be wrong. I know that I have some
full-sized MMC cards (not eMMC) that can be plugged into an SD card
slot. I know that the SD/MMC slot on this port only has 4 pins on
exynos5250, but I think you can still run MMC highspeed on 4 pins,
right?
-Doug
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
