[RFC 4/5] regulator: tps65090: Set voltage for fixed regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to the tps65090 data manual [0], the DCDC1 and DCDC2
step-down converters and the LDO's have a fixed output voltage.

Add this information to the driver since these fixed regulators
be used as input supply for load switches which don't provide
an output voltage and their parent supply voltage is used.

[0]: http://www.ti.com/lit/gpn/tps65090

Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
---
 drivers/regulator/tps65090-regulator.c | 34 +++++++++++++++++++++-------------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 2064b3f..919f5ce 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -192,12 +192,14 @@ static struct regulator_ops tps65090_fet_control_ops = {
 static struct regulator_ops tps65090_ldo_ops = {
 };
 
-#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _ops)	\
+#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
 {							\
 	.name = "TPS65090_RAILS"#_id,			\
 	.supply_name = _sname,				\
 	.id = TPS65090_REGULATOR_##_id,			\
+	.n_voltages = _nvolt,				\
 	.ops = &_ops,					\
+	.fixed_uV = _volt,				\
 	.enable_reg = _en_reg,				\
 	.enable_val = _en_bits,				\
 	.enable_mask = _en_bits,			\
@@ -205,39 +207,45 @@ static struct regulator_ops tps65090_ldo_ops = {
 	.owner = THIS_MODULE,				\
 }
 
+#define tps65090_REG_FIX(_id, _sname, en_reg, _en_bits, _volt, _ops) \
+	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
+
+#define tps65090_REG_VAR(_id, _sname, en_reg, _en_bits, _ops) \
+	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
+
 static struct regulator_desc tps65090_regulator_desc[] = {
-	tps65090_REG_DESC(DCDC1, "vsys1",   0x0C, BIT(CTRL_EN_BIT),
+	tps65090_REG_FIX(DCDC1, "vsys1",   0x0C, BIT(CTRL_EN_BIT), 5000000,
 			  tps65090_reg_control_ops),
-	tps65090_REG_DESC(DCDC2, "vsys2",   0x0D, BIT(CTRL_EN_BIT),
+	tps65090_REG_FIX(DCDC2, "vsys2",   0x0D, BIT(CTRL_EN_BIT), 3300000,
 			  tps65090_reg_control_ops),
-	tps65090_REG_DESC(DCDC3, "vsys3",   0x0E, BIT(CTRL_EN_BIT),
+	tps65090_REG_VAR(DCDC3, "vsys3",   0x0E, BIT(CTRL_EN_BIT),
 			  tps65090_reg_control_ops),
 
-	tps65090_REG_DESC(FET1,  "infet1",  0x0F,
+	tps65090_REG_VAR(FET1,  "infet1",  0x0F,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET2,  "infet2",  0x10,
+	tps65090_REG_VAR(FET2,  "infet2",  0x10,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET3,  "infet3",  0x11,
+	tps65090_REG_VAR(FET3,  "infet3",  0x11,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET4,  "infet4",  0x12,
+	tps65090_REG_VAR(FET4,  "infet4",  0x12,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET5,  "infet5",  0x13,
+	tps65090_REG_VAR(FET5,  "infet5",  0x13,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET6,  "infet6",  0x14,
+	tps65090_REG_VAR(FET6,  "infet6",  0x14,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
-	tps65090_REG_DESC(FET7,  "infet7",  0x15,
+	tps65090_REG_VAR(FET7,  "infet7",  0x15,
 			  BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 			  tps65090_fet_control_ops),
 
-	tps65090_REG_DESC(LDO1,  "vsys-l1", 0, 0,
+	tps65090_REG_FIX(LDO1,  "vsys-l1", 0, 0, 5000000,
 			  tps65090_ldo_ops),
-	tps65090_REG_DESC(LDO2,  "vsys-l2", 0, 0,
+	tps65090_REG_FIX(LDO2,  "vsys-l2", 0, 0, 3300000,
 			  tps65090_ldo_ops),
 };
 
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux