Maxim MAX77802 is a power management chip that contains 10 high efficiency Buck regulators, 32 Low-dropout (LDO) regulators used to power up application processors and peripherals, a 2-channel 32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface to program the individual regulators, clocks outputs and the RTC. This patch adds support for MAX77802 to the MAX77686 driver and is based on a driver added to the Chrome OS kernel 3.8 by Simon Glass. Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> --- This patch was part of a series [0] that add complete support for the MAX77802 chip (regulator, clock, rtc and i2c interface). But there was cross subsystem dependencies since the drivers for the mfd cells needed the registers definitions in the max77686 header added by this patch. Also, since the max77686 driver is being extended, the drivers depend on a currently available config symbol so the dependency was not handled automatically by Kconfig. So, to split the dependencies between kernel releases and make it easier to get everything merged, this patch is resend as a standalone to allow the individual drivers to go thourgh the relevant subsystems trees later on, once this patch lands into mainline. [0]: http://lwn.net/Articles/605350/ Changes since v7: - Rebased on top of the for-mfd-next branch to avoid merge conflicts. - Don't add an entry in the i2c_device_id table. Suggested by Lee Jones. - Use of_device_id match table instead of i2c_device_id to know the PMIC type. Changes since v6: - Fix comments grammar. Suggested by Krzysztof Kozlowski. - Only unregister the RTC i2c device if the type is MAX77686. Suggested by Krzysztof Kozlowski. Changes since v5: - Extend the 77686 driver to support 77802 instead of adding a new driver. Suggested by Lee Jones. Changes since v4: - Use consistent expressions when checking for NULL values. Suggested by Krzysztof Kozlowski. - Remove unused defines. Suggested by Krzysztof Kozlowski. - Explain why IRQ is disabled on suspend. Suggested by Krzysztof Kozlowski. Changes since v3: - Remove unnecessary OOM error message since the mm subsystem already logs it. Changes since v2: - Split the DT binding docs in a separate patch and improve the documentation. Suggested by Mark Brown. - Add all the devices in the MFD driver instead of doing in separate patches. Suggested by Mark Brown. Changes since v1: - Convert max77{686,802} to regmap irq API and get rid of max77{686,802}-irq.c Suggested by Krzysztof Kozlowski. - Don't protect max77802 mfd_cells using Kconfig options since mfd core omits devices that don't match. Suggested by Lee Jones. - Change mfd driver to be tristate instead of boolean. Suggested by Mark Brown. - Change binding "voltage-regulators" property to "regulators" to be consistent with other PMIC drivers. Suggested by Mark Brown. - Use regulators node names instead of the deprecated "regulator-compatible" property. Suggested by Mark Brown. - Use the new descriptor-based GPIO interface instead of the deprecated --- drivers/mfd/Kconfig | 6 +- drivers/mfd/max77686.c | 197 ++++++++++++++++++++++++++++----- include/linux/mfd/max77686-private.h | 208 ++++++++++++++++++++++++++++++++++- include/linux/mfd/max77686.h | 57 +++++++++- 4 files changed, 436 insertions(+), 32 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3010204..de5abf2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -380,15 +380,15 @@ config MFD_MAX14577 of the device. config MFD_MAX77686 - bool "Maxim Semiconductor MAX77686 PMIC Support" + bool "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select IRQ_DOMAIN help - Say yes here to add support for Maxim Semiconductor MAX77686. - This is a Power Management IC with RTC on chip. + Say yes here to add support for Maxim Semiconductor MAX77686 and + MAX77802 which are Power Management IC with an RTC on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index f2bd699..c653322 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -1,5 +1,5 @@ /* - * max77686.c - mfd core driver for the Maxim 77686 + * max77686.c - mfd core driver for the Maxim 77686/802 * * Copyright (C) 2012 Samsung Electronics * Chiwoong Byun <woong.byun@xxxxxxxxxxx> @@ -43,6 +43,74 @@ static const struct mfd_cell max77686_devs[] = { { .name = "max77686-clk", }, }; +static const struct mfd_cell max77802_devs[] = { + { .name = "max77802-pmic", }, + { .name = "max77802-clk", }, + { .name = "max77802-rtc", }, +}; + +static bool max77802_pmic_is_accessible_reg(struct device *dev, + unsigned int reg) +{ + return (reg >= MAX77802_REG_DEVICE_ID && reg < MAX77802_REG_PMIC_END); +} + +static bool max77802_rtc_is_accessible_reg(struct device *dev, + unsigned int reg) +{ + return (reg >= MAX77802_RTC_INT && reg < MAX77802_RTC_END); +} + +static bool max77802_is_accessible_reg(struct device *dev, unsigned int reg) +{ + return (max77802_pmic_is_accessible_reg(dev, reg) || + max77802_rtc_is_accessible_reg(dev, reg)); +} + +static bool max77802_pmic_is_precious_reg(struct device *dev, unsigned int reg) +{ + return (reg == MAX77802_REG_INTSRC || reg == MAX77802_REG_INT1 || + reg == MAX77802_REG_INT2); +} + +static bool max77802_rtc_is_precious_reg(struct device *dev, unsigned int reg) +{ + return (reg == MAX77802_RTC_INT || + reg == MAX77802_RTC_UPDATE0 || + reg == MAX77802_RTC_UPDATE1); +} + +static bool max77802_is_precious_reg(struct device *dev, unsigned int reg) +{ + return (max77802_pmic_is_precious_reg(dev, reg) || + max77802_rtc_is_precious_reg(dev, reg)); +} + +static bool max77802_pmic_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return (max77802_is_precious_reg(dev, reg) || + reg == MAX77802_REG_STATUS1 || reg == MAX77802_REG_STATUS2 || + reg == MAX77802_REG_PWRON); +} + +static bool max77802_rtc_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return (max77802_rtc_is_precious_reg(dev, reg) || + reg == MAX77802_RTC_SEC || + reg == MAX77802_RTC_MIN || + reg == MAX77802_RTC_HOUR || + reg == MAX77802_RTC_WEEKDAY || + reg == MAX77802_RTC_MONTH || + reg == MAX77802_RTC_YEAR || + reg == MAX77802_RTC_DATE); +} + +static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg) +{ + return (max77802_pmic_is_volatile_reg(dev, reg) || + max77802_rtc_is_volatile_reg(dev, reg)); +} + static struct regmap_config max77686_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -53,6 +121,17 @@ static struct regmap_config max77686_rtc_regmap_config = { .val_bits = 8, }; +static struct regmap_config max77802_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = max77802_is_accessible_reg, + .readable_reg = max77802_is_accessible_reg, + .precious_reg = max77802_is_precious_reg, + .volatile_reg = max77802_is_volatile_reg, + .name = "max77802-pmic", + .cache_type = REGCACHE_RBTREE, +}; + static const struct regmap_irq max77686_irqs[] = { /* INT1 interrupts */ { .reg_offset = 0, .mask = MAX77686_INT1_PWRONF_MSK, }, @@ -96,9 +175,34 @@ static const struct regmap_irq_chip max77686_rtc_irq_chip = { .num_irqs = ARRAY_SIZE(max77686_rtc_irqs), }; +static const struct regmap_irq_chip max77802_irq_chip = { + .name = "max77802-pmic", + .status_base = MAX77802_REG_INT1, + .mask_base = MAX77802_REG_INT1MSK, + .num_regs = 2, + .irqs = max77686_irqs, /* same masks as 77686 */ + .num_irqs = ARRAY_SIZE(max77686_irqs), +}; + +static const struct regmap_irq_chip max77802_rtc_irq_chip = { + .name = "max77802-rtc", + .status_base = MAX77802_RTC_INT, + .mask_base = MAX77802_RTC_INTM, + .num_regs = 1, + .irqs = max77686_rtc_irqs, /* same masks as 77686 */ + .num_irqs = ARRAY_SIZE(max77686_rtc_irqs), +}; + static const struct of_device_id max77686_pmic_dt_match[] = { - {.compatible = "maxim,max77686", .data = NULL}, - {}, + { + .compatible = "maxim,max77686", + .data = (void *)TYPE_MAX77686, + }, + { + .compatible = "maxim,max77802", + .data = (void *)TYPE_MAX77802, + }, + { }, }; static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device @@ -119,8 +223,15 @@ static int max77686_i2c_probe(struct i2c_client *i2c, { struct max77686_dev *max77686 = NULL; struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev); + const struct of_device_id *match; unsigned int data; int ret = 0; + const struct regmap_config *config; + const struct regmap_irq_chip *irq_chip; + const struct regmap_irq_chip *rtc_irq_chip; + struct regmap **rtc_regmap; + const struct mfd_cell *cells; + int n_devs; if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata) pdata = max77686_i2c_parse_dt_pdata(&i2c->dev); @@ -135,15 +246,40 @@ static int max77686_i2c_probe(struct i2c_client *i2c, if (!max77686) return -ENOMEM; + if (i2c->dev.of_node) { + match = of_match_node(max77686_pmic_dt_match, i2c->dev.of_node); + if (!match) + return -EINVAL; + + max77686->type = (int)match->data; + } else { + max77686->type = id->driver_data; + } + i2c_set_clientdata(i2c, max77686); max77686->dev = &i2c->dev; max77686->i2c = i2c; - max77686->type = id->driver_data; max77686->wakeup = pdata->wakeup; max77686->irq = i2c->irq; - max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config); + if (max77686->type == TYPE_MAX77686) { + config = &max77686_regmap_config; + irq_chip = &max77686_irq_chip; + rtc_irq_chip = &max77686_rtc_irq_chip; + rtc_regmap = &max77686->rtc_regmap; + cells = max77686_devs; + n_devs = ARRAY_SIZE(max77686_devs); + } else { + config = &max77802_regmap_config; + irq_chip = &max77802_irq_chip; + rtc_irq_chip = &max77802_rtc_irq_chip; + rtc_regmap = &max77686->regmap; + cells = max77802_devs; + n_devs = ARRAY_SIZE(max77802_devs); + } + + max77686->regmap = devm_regmap_init_i2c(i2c, config); if (IS_ERR(max77686->regmap)) { ret = PTR_ERR(max77686->regmap); dev_err(max77686->dev, "Failed to allocate register map: %d\n", @@ -158,41 +294,46 @@ static int max77686_i2c_probe(struct i2c_client *i2c, return -ENODEV; } - max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC); - if (!max77686->rtc) { - dev_err(max77686->dev, "Failed to allocate I2C device for RTC\n"); - return -ENODEV; - } - i2c_set_clientdata(max77686->rtc, max77686); - - max77686->rtc_regmap = devm_regmap_init_i2c(max77686->rtc, - &max77686_rtc_regmap_config); - if (IS_ERR(max77686->rtc_regmap)) { - ret = PTR_ERR(max77686->rtc_regmap); - dev_err(max77686->dev, "failed to allocate RTC regmap: %d\n", - ret); - goto err_unregister_i2c; + if (max77686->type == TYPE_MAX77686) { + max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC); + if (!max77686->rtc) { + dev_err(max77686->dev, + "Failed to allocate I2C device for RTC\n"); + return -ENODEV; + } + i2c_set_clientdata(max77686->rtc, max77686); + + max77686->rtc_regmap = + devm_regmap_init_i2c(max77686->rtc, + &max77686_rtc_regmap_config); + if (IS_ERR(max77686->rtc_regmap)) { + ret = PTR_ERR(max77686->rtc_regmap); + dev_err(max77686->dev, + "failed to allocate RTC regmap: %d\n", + ret); + goto err_unregister_i2c; + } } ret = regmap_add_irq_chip(max77686->regmap, max77686->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT | - IRQF_SHARED, 0, &max77686_irq_chip, + IRQF_SHARED, 0, irq_chip, &max77686->irq_data); if (ret) { dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret); goto err_unregister_i2c; } - ret = regmap_add_irq_chip(max77686->rtc_regmap, max77686->irq, + + ret = regmap_add_irq_chip(*rtc_regmap, max77686->irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT | - IRQF_SHARED, 0, &max77686_rtc_irq_chip, + IRQF_SHARED, 0, rtc_irq_chip, &max77686->rtc_irq_data); if (ret) { dev_err(&i2c->dev, "failed to add RTC irq chip: %d\n", ret); goto err_del_irqc; } - ret = mfd_add_devices(max77686->dev, -1, max77686_devs, - ARRAY_SIZE(max77686_devs), NULL, 0, NULL); + ret = mfd_add_devices(max77686->dev, -1, cells, n_devs, NULL, 0, NULL); if (ret < 0) { dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); goto err_del_rtc_irqc; @@ -205,7 +346,8 @@ err_del_rtc_irqc: err_del_irqc: regmap_del_irq_chip(max77686->irq, max77686->irq_data); err_unregister_i2c: - i2c_unregister_device(max77686->rtc); + if (max77686->type == TYPE_MAX77686) + i2c_unregister_device(max77686->rtc); return ret; } @@ -219,7 +361,8 @@ static int max77686_i2c_remove(struct i2c_client *i2c) regmap_del_irq_chip(max77686->irq, max77686->rtc_irq_data); regmap_del_irq_chip(max77686->irq, max77686->irq_data); - i2c_unregister_device(max77686->rtc); + if (max77686->type == TYPE_MAX77686) + i2c_unregister_device(max77686->rtc); return 0; } @@ -294,6 +437,6 @@ static void __exit max77686_i2c_exit(void) } module_exit(max77686_i2c_exit); -MODULE_DESCRIPTION("MAXIM 77686 multi-function core driver"); +MODULE_DESCRIPTION("MAXIM 77686/802 multi-function core driver"); MODULE_AUTHOR("Chiwoong Byun <woong.byun@xxxxxxxxxxx>"); MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index 8e17780..0d60b38 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -1,5 +1,5 @@ /* - * max77686-private.h - Voltage regulator driver for the Maxim 77686 + * max77686-private.h - Voltage regulator driver for the Maxim 77686/802 * * Copyright (C) 2012 Samsung Electrnoics * Chiwoong Byun <woong.byun@xxxxxxxxxxx> @@ -28,6 +28,7 @@ #define MAX77686_REG_INVALID (0xff) +/* MAX77686 PMIC registers */ enum max77686_pmic_reg { MAX77686_REG_DEVICE_ID = 0x00, MAX77686_REG_INTSRC = 0x01, @@ -181,6 +182,210 @@ enum max77686_rtc_reg { MAX77686_ALARM2_DATE = 0x1B, }; +/* MAX77802 PMIC registers */ +enum max77802_pmic_reg { + MAX77802_REG_DEVICE_ID = 0x00, + MAX77802_REG_INTSRC = 0x01, + MAX77802_REG_INT1 = 0x02, + MAX77802_REG_INT2 = 0x03, + + MAX77802_REG_INT1MSK = 0x04, + MAX77802_REG_INT2MSK = 0x05, + + MAX77802_REG_STATUS1 = 0x06, + MAX77802_REG_STATUS2 = 0x07, + + MAX77802_REG_PWRON = 0x08, + /* Reserved: 0x09 */ + MAX77802_REG_MRSTB = 0x0A, + MAX77802_REG_EPWRHOLD = 0x0B, + /* Reserved: 0x0C-0x0D */ + MAX77802_REG_BOOSTCTRL = 0x0E, + MAX77802_REG_BOOSTOUT = 0x0F, + + MAX77802_REG_BUCK1CTRL = 0x10, + MAX77802_REG_BUCK1DVS1 = 0x11, + MAX77802_REG_BUCK1DVS2 = 0x12, + MAX77802_REG_BUCK1DVS3 = 0x13, + MAX77802_REG_BUCK1DVS4 = 0x14, + MAX77802_REG_BUCK1DVS5 = 0x15, + MAX77802_REG_BUCK1DVS6 = 0x16, + MAX77802_REG_BUCK1DVS7 = 0x17, + MAX77802_REG_BUCK1DVS8 = 0x18, + /* Reserved: 0x19 */ + MAX77802_REG_BUCK2CTRL1 = 0x1A, + MAX77802_REG_BUCK2CTRL2 = 0x1B, + MAX77802_REG_BUCK2PHTRAN = 0x1C, + MAX77802_REG_BUCK2DVS1 = 0x1D, + MAX77802_REG_BUCK2DVS2 = 0x1E, + MAX77802_REG_BUCK2DVS3 = 0x1F, + MAX77802_REG_BUCK2DVS4 = 0x20, + MAX77802_REG_BUCK2DVS5 = 0x21, + MAX77802_REG_BUCK2DVS6 = 0x22, + MAX77802_REG_BUCK2DVS7 = 0x23, + MAX77802_REG_BUCK2DVS8 = 0x24, + /* Reserved: 0x25-0x26 */ + MAX77802_REG_BUCK3CTRL1 = 0x27, + MAX77802_REG_BUCK3DVS1 = 0x28, + MAX77802_REG_BUCK3DVS2 = 0x29, + MAX77802_REG_BUCK3DVS3 = 0x2A, + MAX77802_REG_BUCK3DVS4 = 0x2B, + MAX77802_REG_BUCK3DVS5 = 0x2C, + MAX77802_REG_BUCK3DVS6 = 0x2D, + MAX77802_REG_BUCK3DVS7 = 0x2E, + MAX77802_REG_BUCK3DVS8 = 0x2F, + /* Reserved: 0x30-0x36 */ + MAX77802_REG_BUCK4CTRL1 = 0x37, + MAX77802_REG_BUCK4DVS1 = 0x38, + MAX77802_REG_BUCK4DVS2 = 0x39, + MAX77802_REG_BUCK4DVS3 = 0x3A, + MAX77802_REG_BUCK4DVS4 = 0x3B, + MAX77802_REG_BUCK4DVS5 = 0x3C, + MAX77802_REG_BUCK4DVS6 = 0x3D, + MAX77802_REG_BUCK4DVS7 = 0x3E, + MAX77802_REG_BUCK4DVS8 = 0x3F, + /* Reserved: 0x40 */ + MAX77802_REG_BUCK5CTRL = 0x41, + MAX77802_REG_BUCK5OUT = 0x42, + /* Reserved: 0x43 */ + MAX77802_REG_BUCK6CTRL = 0x44, + MAX77802_REG_BUCK6DVS1 = 0x45, + MAX77802_REG_BUCK6DVS2 = 0x46, + MAX77802_REG_BUCK6DVS3 = 0x47, + MAX77802_REG_BUCK6DVS4 = 0x48, + MAX77802_REG_BUCK6DVS5 = 0x49, + MAX77802_REG_BUCK6DVS6 = 0x4A, + MAX77802_REG_BUCK6DVS7 = 0x4B, + MAX77802_REG_BUCK6DVS8 = 0x4C, + /* Reserved: 0x4D */ + MAX77802_REG_BUCK7CTRL = 0x4E, + MAX77802_REG_BUCK7OUT = 0x4F, + /* Reserved: 0x50 */ + MAX77802_REG_BUCK8CTRL = 0x51, + MAX77802_REG_BUCK8OUT = 0x52, + /* Reserved: 0x53 */ + MAX77802_REG_BUCK9CTRL = 0x54, + MAX77802_REG_BUCK9OUT = 0x55, + /* Reserved: 0x56 */ + MAX77802_REG_BUCK10CTRL = 0x57, + MAX77802_REG_BUCK10OUT = 0x58, + + /* Reserved: 0x59-0x5F */ + + MAX77802_REG_LDO1CTRL1 = 0x60, + MAX77802_REG_LDO2CTRL1 = 0x61, + MAX77802_REG_LDO3CTRL1 = 0x62, + MAX77802_REG_LDO4CTRL1 = 0x63, + MAX77802_REG_LDO5CTRL1 = 0x64, + MAX77802_REG_LDO6CTRL1 = 0x65, + MAX77802_REG_LDO7CTRL1 = 0x66, + MAX77802_REG_LDO8CTRL1 = 0x67, + MAX77802_REG_LDO9CTRL1 = 0x68, + MAX77802_REG_LDO10CTRL1 = 0x69, + MAX77802_REG_LDO11CTRL1 = 0x6A, + MAX77802_REG_LDO12CTRL1 = 0x6B, + MAX77802_REG_LDO13CTRL1 = 0x6C, + MAX77802_REG_LDO14CTRL1 = 0x6D, + MAX77802_REG_LDO15CTRL1 = 0x6E, + /* Reserved: 0x6F */ + MAX77802_REG_LDO17CTRL1 = 0x70, + MAX77802_REG_LDO18CTRL1 = 0x71, + MAX77802_REG_LDO19CTRL1 = 0x72, + MAX77802_REG_LDO20CTRL1 = 0x73, + MAX77802_REG_LDO21CTRL1 = 0x74, + MAX77802_REG_LDO22CTRL1 = 0x75, + MAX77802_REG_LDO23CTRL1 = 0x76, + MAX77802_REG_LDO24CTRL1 = 0x77, + MAX77802_REG_LDO25CTRL1 = 0x78, + MAX77802_REG_LDO26CTRL1 = 0x79, + MAX77802_REG_LDO27CTRL1 = 0x7A, + MAX77802_REG_LDO28CTRL1 = 0x7B, + MAX77802_REG_LDO29CTRL1 = 0x7C, + MAX77802_REG_LDO30CTRL1 = 0x7D, + /* Reserved: 0x7E */ + MAX77802_REG_LDO32CTRL1 = 0x7F, + MAX77802_REG_LDO33CTRL1 = 0x80, + MAX77802_REG_LDO34CTRL1 = 0x81, + MAX77802_REG_LDO35CTRL1 = 0x82, + /* Reserved: 0x83-0x8F */ + MAX77802_REG_LDO1CTRL2 = 0x90, + MAX77802_REG_LDO2CTRL2 = 0x91, + MAX77802_REG_LDO3CTRL2 = 0x92, + MAX77802_REG_LDO4CTRL2 = 0x93, + MAX77802_REG_LDO5CTRL2 = 0x94, + MAX77802_REG_LDO6CTRL2 = 0x95, + MAX77802_REG_LDO7CTRL2 = 0x96, + MAX77802_REG_LDO8CTRL2 = 0x97, + MAX77802_REG_LDO9CTRL2 = 0x98, + MAX77802_REG_LDO10CTRL2 = 0x99, + MAX77802_REG_LDO11CTRL2 = 0x9A, + MAX77802_REG_LDO12CTRL2 = 0x9B, + MAX77802_REG_LDO13CTRL2 = 0x9C, + MAX77802_REG_LDO14CTRL2 = 0x9D, + MAX77802_REG_LDO15CTRL2 = 0x9E, + /* Reserved: 0x9F */ + MAX77802_REG_LDO17CTRL2 = 0xA0, + MAX77802_REG_LDO18CTRL2 = 0xA1, + MAX77802_REG_LDO19CTRL2 = 0xA2, + MAX77802_REG_LDO20CTRL2 = 0xA3, + MAX77802_REG_LDO21CTRL2 = 0xA4, + MAX77802_REG_LDO22CTRL2 = 0xA5, + MAX77802_REG_LDO23CTRL2 = 0xA6, + MAX77802_REG_LDO24CTRL2 = 0xA7, + MAX77802_REG_LDO25CTRL2 = 0xA8, + MAX77802_REG_LDO26CTRL2 = 0xA9, + MAX77802_REG_LDO27CTRL2 = 0xAA, + MAX77802_REG_LDO28CTRL2 = 0xAB, + MAX77802_REG_LDO29CTRL2 = 0xAC, + MAX77802_REG_LDO30CTRL2 = 0xAD, + /* Reserved: 0xAE */ + MAX77802_REG_LDO32CTRL2 = 0xAF, + MAX77802_REG_LDO33CTRL2 = 0xB0, + MAX77802_REG_LDO34CTRL2 = 0xB1, + MAX77802_REG_LDO35CTRL2 = 0xB2, + /* Reserved: 0xB3 */ + + MAX77802_REG_BBAT_CHG = 0xB4, + MAX77802_REG_32KHZ = 0xB5, + + MAX77802_REG_PMIC_END = 0xB6, +}; + +enum max77802_rtc_reg { + MAX77802_RTC_INT = 0xC0, + MAX77802_RTC_INTM = 0xC1, + MAX77802_RTC_CONTROLM = 0xC2, + MAX77802_RTC_CONTROL = 0xC3, + MAX77802_RTC_UPDATE0 = 0xC4, + MAX77802_RTC_UPDATE1 = 0xC5, + MAX77802_WTSR_SMPL_CNTL = 0xC6, + MAX77802_RTC_SEC = 0xC7, + MAX77802_RTC_MIN = 0xC8, + MAX77802_RTC_HOUR = 0xC9, + MAX77802_RTC_WEEKDAY = 0xCA, + MAX77802_RTC_MONTH = 0xCB, + MAX77802_RTC_YEAR = 0xCC, + MAX77802_RTC_DATE = 0xCD, + MAX77802_RTC_AE1 = 0xCE, + MAX77802_ALARM1_SEC = 0xCF, + MAX77802_ALARM1_MIN = 0xD0, + MAX77802_ALARM1_HOUR = 0xD1, + MAX77802_ALARM1_WEEKDAY = 0xD2, + MAX77802_ALARM1_MONTH = 0xD3, + MAX77802_ALARM1_YEAR = 0xD4, + MAX77802_ALARM1_DATE = 0xD5, + MAX77802_RTC_AE2 = 0xD6, + MAX77802_ALARM2_SEC = 0xD7, + MAX77802_ALARM2_MIN = 0xD8, + MAX77802_ALARM2_HOUR = 0xD9, + MAX77802_ALARM2_WEEKDAY = 0xDA, + MAX77802_ALARM2_MONTH = 0xDB, + MAX77802_ALARM2_YEAR = 0xDC, + MAX77802_ALARM2_DATE = 0xDD, + + MAX77802_RTC_END = 0xDF, +}; + enum max77686_irq_source { PMIC_INT1 = 0, PMIC_INT2, @@ -250,6 +455,7 @@ struct max77686_dev { enum max77686_types { TYPE_MAX77686, + TYPE_MAX77802, }; extern int max77686_irq_init(struct max77686_dev *max77686); diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 4cbcc13..7e6dc4b 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -1,5 +1,5 @@ /* - * max77686.h - Driver for the Maxim 77686 + * max77686.h - Driver for the Maxim 77686/802 * * Copyright (C) 2012 Samsung Electrnoics * Chiwoong Byun <woong.byun@xxxxxxxxxxx> @@ -71,6 +71,54 @@ enum max77686_regulators { MAX77686_REG_MAX, }; +/* MAX77802 regulator IDs */ +enum max77802_regulators { + MAX77802_BUCK1 = 0, + MAX77802_BUCK2, + MAX77802_BUCK3, + MAX77802_BUCK4, + MAX77802_BUCK5, + MAX77802_BUCK6, + MAX77802_BUCK7, + MAX77802_BUCK8, + MAX77802_BUCK9, + MAX77802_BUCK10, + MAX77802_LDO1, + MAX77802_LDO2, + MAX77802_LDO3, + MAX77802_LDO4, + MAX77802_LDO5, + MAX77802_LDO6, + MAX77802_LDO7, + MAX77802_LDO8, + MAX77802_LDO9, + MAX77802_LDO10, + MAX77802_LDO11, + MAX77802_LDO12, + MAX77802_LDO13, + MAX77802_LDO14, + MAX77802_LDO15, + MAX77802_LDO17, + MAX77802_LDO18, + MAX77802_LDO19, + MAX77802_LDO20, + MAX77802_LDO21, + MAX77802_LDO23, + MAX77802_LDO24, + MAX77802_LDO25, + MAX77802_LDO26, + MAX77802_LDO27, + MAX77802_LDO28, + MAX77802_LDO29, + MAX77802_LDO30, + MAX77802_LDO32, + MAX77802_LDO33, + MAX77802_LDO34, + MAX77802_LDO35, + + MAX77802_REG_MAX, +}; + struct max77686_regulator_data { int id; struct regulator_init_data *initdata; @@ -83,6 +131,13 @@ enum max77686_opmode { MAX77686_OPMODE_STANDBY, }; +enum max77802_opmode { + MAX77802_OPMODE_OFF, + MAX77802_OPMODE_STANDBY, + MAX77802_OPMODE_LP, + MAX77802_OPMODE_NORMAL, +}; + struct max77686_opmode_data { int id; int mode; -- 2.0.0.rc2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |