[PATCH 2/2] iio: adc: exynos_adc: Add support for S3C24xx ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
is alomost same as ADCv1. But, There are a little difference as following:
- ADCMUX register address to select channel
- ADCDAT mask (10bit or 12bit ADC resolution according to SoC version)

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 .../devicetree/bindings/arm/samsung/exynos-adc.txt | 10 ++-
 drivers/iio/adc/exynos_adc.c                       | 89 +++++++++++++++++++++-
 2 files changed, 96 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index b6e3989..fe34c76 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -11,11 +11,19 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 controllers.
+				for exynos4412/5250 and s5pv210 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
+			Must be "samsung,s3c2410-adc" for
+				the ADC in s3c2410 and compatibles
+			Must be "samsung,s3c2416-adc" for
+				the ADC in s3c2416 and compatibles
+			Must be "samsung,s3c2440-adc" for
+				the ADC in s3c2440 and compatibles
+			Must be "samsung,s3c2443-adc" for
+				the ADC in s3c2443 and compatibles
 			Must be "samsung,s3c6410-adc" for
 				the ADC in s3c6410 and compatibles
 - reg:			Contains ADC register address range (base address and
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 05bdd2f12..7d28032 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -51,6 +51,9 @@
 #define ADC_V1_MUX(x)		((x) + 0x1c)
 #define ADC_V1_CLRINTPNDNUP(x)	((x) + 0x20)
 
+/* S3C2410 ADC registers definitions */
+#define ADC_S3C2410_MUX(x)	((x) + 0x18)
+
 /* Future ADC_V2 registers definitions */
 #define ADC_V2_CON1(x)		((x) + 0x00)
 #define ADC_V2_CON2(x)		((x) + 0x04)
@@ -67,6 +70,8 @@
 
 /* Bit definitions for S3C2410 ADC */
 #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) <<3)
+#define ADC_S3C2410_DATX_MASK	0x3FF
+#define ADC_S3C2416_CON_RES_SEL	(1 << 3)
 
 /* Bit definitions for ADC_V2 */
 #define ADC_V2_CON1_SOFT_RESET	(1u << 2)
@@ -84,6 +89,7 @@
 
 /* Bit definitions common for ADC_V1 and ADC_V2 */
 #define ADC_CON_EN_START	(1u << 0)
+#define ADC_CON_EN_START_MASK	(0x3 << 0)
 #define ADC_DATX_MASK		0xFFF
 
 #define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
@@ -101,12 +107,14 @@ struct exynos_adc {
 	struct completion	completion;
 
 	u32			value;
+	u32			value2;
 	unsigned int            version;
 };
 
 struct exynos_adc_data {
 	int num_channels;
 	bool needs_sclk;
+	u32 mask;
 
 	void (*init_hw)(struct exynos_adc *info);
 	void (*exit_hw)(struct exynos_adc *info);
@@ -217,6 +225,17 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
 
 static const struct exynos_adc_data const exynos_adc_v1_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_v1_start_conv,
+};
+
+static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_S3C2410_DATX_MASK, /* 10bit ADC resolution */
 
 	.init_hw	= exynos_adc_v1_init_hw,
 	.exit_hw	= exynos_adc_v1_exit_hw,
@@ -224,6 +243,55 @@ static const struct exynos_adc_data const exynos_adc_v1_data = {
 	.start_conv	= exynos_adc_v1_start_conv,
 };
 
+static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	/* Enable 12bit ADC resolution */
+	con1 = readl(ADC_V1_CON(info->regs));
+	con1 |= ADC_S3C2416_CON_RES_SEL;
+	writel(con1, ADC_V1_CON(info->regs));
+
+	/* Select channel for S3C2416 */
+	writel(addr, ADC_S3C2410_MUX(info->regs));
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2416_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_s3c2416_start_conv,
+};
+
+static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	/* Select channel for S3C2433 */
+	writel(addr, ADC_S3C2410_MUX(info->regs));
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2443_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_S3C2410_DATX_MASK, /* 10bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_s3c2443_start_conv,
+};
+
 static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
 					  unsigned long addr)
 {
@@ -237,6 +305,7 @@ static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
 
 static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12bit ADC resolution */
 
 	.init_hw	= exynos_adc_v1_init_hw,
 	.exit_hw	= exynos_adc_v1_exit_hw,
@@ -293,6 +362,7 @@ static void exynos_adc_v2_start_conv(struct exynos_adc *info,
 
 static const struct exynos_adc_data const exynos_adc_v2_data = {
 	.num_channels	= MAX_ADC_V2_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12bit ADC resolution */
 
 	.init_hw	= exynos_adc_v2_init_hw,
 	.exit_hw	= exynos_adc_v2_exit_hw,
@@ -302,6 +372,7 @@ static const struct exynos_adc_data const exynos_adc_v2_data = {
 
 static const struct exynos_adc_data const exynos3250_adc_data = {
 	.num_channels	= MAX_EXYNOS3250_ADC_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12bit ADC resolution */
 	.needs_sclk	= true,
 
 	.init_hw	= exynos_adc_v2_init_hw,
@@ -312,6 +383,18 @@ static const struct exynos_adc_data const exynos3250_adc_data = {
 
 static const struct of_device_id exynos_adc_match[] = {
 	{
+		.compatible = "samsung,s3c2410-adc",
+		.data = &exynos_adc_s3c24xx_data,
+	}, {
+		.compatible = "samsung,s3c2416-adc",
+		.data = &exynos_adc_s3c2416_data,
+	}, {
+		.compatible = "samsung,s3c2440-adc",
+		.data = &exynos_adc_s3c24xx_data,
+	}, {
+		.compatible = "samsung,s3c2443-adc",
+		.data = &exynos_adc_s3c2443_data,
+	}, {
 		.compatible = "samsung,s3c6410-adc",
 		.data = &exynos_adc_s3c64xx_data,
 	}, {
@@ -365,7 +448,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 		ret = -ETIMEDOUT;
 	} else {
 		*val = info->value;
-		*val2 = 0;
+		*val2 = info->value2;
 		ret = IIO_VAL_INT;
 	}
 
@@ -377,9 +460,11 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 {
 	struct exynos_adc *info = (struct exynos_adc *)dev_id;
+	u32 mask = info->data->mask;
 
 	/* Read value */
-	info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK;
+	info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+	info->value2 = readl(ADC_V1_DATY(info->regs)) & mask;
 
 	/* clear irq */
 	if (info->data->clear_irq)
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux