Re: [RESEND PATCH V5 08/12] drm/bridge: ptn3460: Support bridge chaining

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2014년 07월 18일 05:43, Ajay Kumar wrote:
> Modify the driver to invoke callbacks for the next bridge
> in the bridge chain.
> Also, remove the drm_connector implementation from ptn3460,
> since the same is implemented using panel_binder.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/bridge/ptn3460.c        |  137 +++++--------------------------
>  drivers/gpu/drm/exynos/exynos_dp_core.c |   16 ++--
>  include/drm/bridge/ptn3460.h            |   15 ++--
>  3 files changed, 39 insertions(+), 129 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
> index d466696..5fe16c6 100644
> --- a/drivers/gpu/drm/bridge/ptn3460.c
> +++ b/drivers/gpu/drm/bridge/ptn3460.c
> @@ -34,37 +34,15 @@
>  #define PTN3460_EDID_SRAM_LOAD_ADDR		0x85
>  
>  struct ptn3460_bridge {
> -	struct drm_connector connector;
>  	struct i2c_client *client;
>  	struct drm_encoder *encoder;
>  	struct drm_bridge *bridge;
> -	struct edid *edid;
>  	int gpio_pd_n;
>  	int gpio_rst_n;
>  	u32 edid_emulation;
>  	bool enabled;
>  };
>  
> -static int ptn3460_read_bytes(struct ptn3460_bridge *ptn_bridge, char addr,
> -		u8 *buf, int len)
> -{
> -	int ret;
> -
> -	ret = i2c_master_send(ptn_bridge->client, &addr, 1);
> -	if (ret <= 0) {
> -		DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
> -		return ret;
> -	}
> -
> -	ret = i2c_master_recv(ptn_bridge->client, buf, len);
> -	if (ret <= 0) {
> -		DRM_ERROR("Failed to recv i2c data, ret=%d\n", ret);
> -		return ret;
> -	}
> -
> -	return 0;
> -}
> -
>  static int ptn3460_write_byte(struct ptn3460_bridge *ptn_bridge, char addr,
>  		char val)
>  {
> @@ -126,6 +104,8 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  		gpio_set_value(ptn_bridge->gpio_rst_n, 1);
>  	}
>  
> +	drm_next_bridge_pre_enable(bridge);
> +
>  	/*
>  	 * There's a bug in the PTN chip where it falsely asserts hotplug before
>  	 * it is fully functional. We're forced to wait for the maximum start up
> @@ -142,6 +122,7 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
>  
>  static void ptn3460_enable(struct drm_bridge *bridge)
>  {
> +	drm_next_bridge_enable(bridge);
>  }
>  
>  static void ptn3460_disable(struct drm_bridge *bridge)
> @@ -153,6 +134,8 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>  
>  	ptn_bridge->enabled = false;
>  
> +	drm_next_bridge_disable(bridge);
> +
>  	if (gpio_is_valid(ptn_bridge->gpio_rst_n))
>  		gpio_set_value(ptn_bridge->gpio_rst_n, 1);
>  
> @@ -162,6 +145,7 @@ static void ptn3460_disable(struct drm_bridge *bridge)
>  
>  static void ptn3460_post_disable(struct drm_bridge *bridge)
>  {
> +	drm_next_bridge_post_disable(bridge);
>  }
>  
>  void ptn3460_bridge_destroy(struct drm_bridge *bridge)
> @@ -173,6 +157,9 @@ void ptn3460_bridge_destroy(struct drm_bridge *bridge)
>  		gpio_free(ptn_bridge->gpio_pd_n);
>  	if (gpio_is_valid(ptn_bridge->gpio_rst_n))
>  		gpio_free(ptn_bridge->gpio_rst_n);
> +
> +	drm_next_bridge_destroy(bridge);
> +
>  	/* Nothing else to free, we've got devm allocated memory */
>  }
>  
> @@ -184,81 +171,10 @@ struct drm_bridge_funcs ptn3460_bridge_funcs = {
>  	.destroy = ptn3460_bridge_destroy,
>  };
>  
> -int ptn3460_get_modes(struct drm_connector *connector)
> -{
> -	struct ptn3460_bridge *ptn_bridge;
> -	u8 *edid;
> -	int ret, num_modes;
> -	bool power_off;
> -
> -	ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
> -
> -	if (ptn_bridge->edid)
> -		return drm_add_edid_modes(connector, ptn_bridge->edid);
> -
> -	power_off = !ptn_bridge->enabled;
> -	ptn3460_pre_enable(ptn_bridge->bridge);
> -
> -	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
> -	if (!edid) {
> -		DRM_ERROR("Failed to allocate edid\n");
> -		return 0;
> -	}
> -
> -	ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid,
> -			EDID_LENGTH);
> -	if (ret) {
> -		kfree(edid);
> -		num_modes = 0;
> -		goto out;
> -	}
> -
> -	ptn_bridge->edid = (struct edid *)edid;
> -	drm_mode_connector_update_edid_property(connector, ptn_bridge->edid);
> -
> -	num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
> -
> -out:
> -	if (power_off)
> -		ptn3460_disable(ptn_bridge->bridge);
> -
> -	return num_modes;
> -}
> -
> -struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
> -{
> -	struct ptn3460_bridge *ptn_bridge;
> -
> -	ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
> -
> -	return ptn_bridge->encoder;
> -}
> -
> -struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
> -	.get_modes = ptn3460_get_modes,
> -	.best_encoder = ptn3460_best_encoder,
> -};
> -
> -enum drm_connector_status ptn3460_detect(struct drm_connector *connector,
> -		bool force)
> -{
> -	return connector_status_connected;
> -}
> -
> -void ptn3460_connector_destroy(struct drm_connector *connector)
> -{
> -	drm_connector_cleanup(connector);
> -}
> -
> -struct drm_connector_funcs ptn3460_connector_funcs = {
> -	.dpms = drm_helper_connector_dpms,
> -	.fill_modes = drm_helper_probe_single_connector_modes,
> -	.detect = ptn3460_detect,
> -	.destroy = ptn3460_connector_destroy,
> -};
> -
> -int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
> -		struct i2c_client *client, struct device_node *node)
> +struct drm_bridge *ptn3460_init(struct drm_device *dev,
> +				struct drm_encoder *encoder,
> +				struct i2c_client *client,
> +				struct device_node *node)
>  {
>  	int ret;
>  	struct drm_bridge *bridge;
> @@ -267,13 +183,13 @@ int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
>  	bridge = devm_kzalloc(dev->dev, sizeof(*bridge), GFP_KERNEL);
>  	if (!bridge) {
>  		DRM_ERROR("Failed to allocate drm bridge\n");
> -		return -ENOMEM;
> +		return NULL;

I think you could handle error case correctly. Please return
ERR_PTR(-ENOMEM) instead of NULL, and below codes also.

Thanks,
Inki Dae

>  	}
>  
>  	ptn_bridge = devm_kzalloc(dev->dev, sizeof(*ptn_bridge), GFP_KERNEL);
>  	if (!ptn_bridge) {
>  		DRM_ERROR("Failed to allocate ptn bridge\n");
> -		return -ENOMEM;
> +		return NULL;
>  	}
>  
>  	ptn_bridge->client = client;
> @@ -285,7 +201,7 @@ int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
>  				GPIOF_OUT_INIT_HIGH, "PTN3460_PD_N");
>  		if (ret) {
>  			DRM_ERROR("Request powerdown-gpio failed (%d)\n", ret);
> -			return ret;
> +			return NULL;
>  		}
>  	}
>  
> @@ -300,7 +216,7 @@ int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
>  		if (ret) {
>  			DRM_ERROR("Request reset-gpio failed (%d)\n", ret);
>  			gpio_free(ptn_bridge->gpio_pd_n);
> -			return ret;
> +			return NULL;
>  		}
>  	}
>  
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux