+devicetree@xxxxxxxxxxxxxxx
On Fri, Jul 18, 2014 at 2:13 AM, Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> wrote:
> Add DT binding documentation for panel-lvds driver.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/panel/panel-lvds.txt | 50 ++++++++++++++++++++
> 1 file changed, 50 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/panel-lvds.txt
>
> diff --git a/Documentation/devicetree/bindings/panel/panel-lvds.txt b/Documentation/devicetree/bindings/panel/panel-lvds.txt
> new file mode 100644
> index 0000000..fdf91da2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/panel-lvds.txt
> @@ -0,0 +1,50 @@
> +panel interface for eDP/lvds panels
> +
> +Required properties:
> + - compatible: "panel-lvds"
> +
> +Optional properties:
> + -lcd-enable-gpios:
> + panel LCD poweron GPIO.
> + Indicates which GPIO needs to be powered up as output
> + to powerup/enable the switch to the LCD panel.
> + -backlight-enable-gpios:
> + panel LED enable GPIO.
> + Indicates which GPIO needs to be powered up as output
> + to enable the backlight.
> + -panel-prepare-delay:
> + delay value in ms required for panel_prepare process
> + Delay in ms needed for the panel LCD unit to
> + powerup completely.
> + ex: delay needed till eDP panel throws HPD.
> + delay needed so that we cans tart reading edid.
> + -panel-enable-delay:
> + delay value in ms required for panel_enable process
> + Delay in ms needed for the panel backlight/LED unit
> + to powerup, and delay needed between video_enable and
> + backlight_enable.
> + -panel-disable-delay:
> + delay value in ms required for panel_disable process
> + Delay in ms needed for the panel backlight/LED unit
> + powerdown, and delay needed between backlight_disable
> + and video_disable.
> + -panel-unprepare-delay:
> + delay value in ms required for panel_post_disable process
> + Delay in ms needed for the panel LCD unit to
> + to powerdown completely, and the minimum delay needed
> + before powering it on again.
> + -panel-width-mm: physical panel width [mm]
> + -panel-height-mm: physical panel height [mm]
> +
> +Example:
> +
> + panel-lvds {
> + compatible = "panel-lvds";
> + backlight-enable-gpios = <&gpx3 0 0>;
> + panel-prepare-delay = <40>;
> + panel-enable-delay = <20>;
> + panel-disable-delay = <20>;
> + panel-unprepare-delay = <30>;
> + panel-width-mm = <256>;
> + panel-height-mm = <144>;
> + };
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
