On Fri, 2014-07-04 at 19:48 +0200, Tomasz Figa wrote: > Since all in-tree boards have been moved to device tree, we can now drop > legacy code and make mach-s5pv210 DT-only. This patch does it. > > Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx> > --- This patch showed up in next-20140716 too. >[...] > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig > index ed492cf..d6d0f92 100644 > --- a/arch/arm/mach-s5pv210/Kconfig > +++ b/arch/arm/mach-s5pv210/Kconfig > @@ -19,181 +19,8 @@ config CPU_S5PV210 > help > Enable S5PV210 CPU support > > -config S5PV210_SETUP_I2C1 > - bool > - help > - Common setup code for i2c bus 1. > - > -config S5PV210_SETUP_I2C2 > - bool > - help > - Common setup code for i2c bus 2. > - > -config S5PV210_SETUP_IDE > - bool > - help > - Common setup code for S5PV210 IDE GPIO configurations > - > -config S5PV210_SETUP_FB_24BPP > - bool > - help > - Common setup code for S5PV210 with an 24bpp RGB display helper. > - > -config S5PV210_SETUP_KEYPAD > - bool > - help > - Common setup code for keypad. > - > -config S5PV210_SETUP_SDHCI > - bool > - select S5PV210_SETUP_SDHCI_GPIO > - help > - Internal helper functions for S5PV210 based SDHCI systems > - > -config S5PV210_SETUP_SDHCI_GPIO > - bool > - help > - Common setup code for SDHCI gpio. > - > -config S5PV210_SETUP_FIMC > - bool > - help > - Common setup code for the camera interfaces. > - > -config S5PV210_SETUP_SPI > - bool > - help > - Common setup code for SPI GPIO configurations. > - > -config S5PV210_SETUP_USB_PHY > - bool > - help > - Common setup code for USB PHY controller > - > -menu "S5PC110 Machines" > - > -config MACH_AQUILA > - bool "Aquila" > - select CPU_S5PV210 > - select S3C_DEV_FB > - select S3C_DEV_HSMMC > - select S3C_DEV_HSMMC1 > - select S3C_DEV_HSMMC2 > - select S5PV210_SETUP_FB_24BPP > - select S5PV210_SETUP_SDHCI > - select S5PV210_SETUP_USB_PHY > - select S5P_DEV_FIMC0 > - select S5P_DEV_FIMC1 > - select S5P_DEV_FIMC2 > - select S5P_DEV_ONENAND > - help > - Machine support for the Samsung Aquila target based on S5PC110 SoC > - This symbol is still referenced in sound/soc/samsung/Kconfig. > -config MACH_GONI > - bool "GONI" > - select CPU_S5PV210 > - select S3C_DEV_FB > - select S3C_DEV_HSMMC > - select S3C_DEV_HSMMC1 > - select S3C_DEV_HSMMC2 > - select S3C_DEV_I2C1 > - select S3C_DEV_I2C2 > - select S3C_DEV_USB_HSOTG > - select S5PV210_SETUP_FB_24BPP > - select S5PV210_SETUP_FIMC > - select S5PV210_SETUP_I2C1 > - select S5PV210_SETUP_I2C2 > - select S5PV210_SETUP_KEYPAD > - select S5PV210_SETUP_SDHCI > - select S5PV210_SETUP_USB_PHY > - select S5P_DEV_FIMC0 > - select S5P_DEV_FIMC1 > - select S5P_DEV_FIMC2 > - select S5P_DEV_MFC > - select S5P_DEV_ONENAND > - select S5P_DEV_TV > - select S5P_GPIO_INT > - select SAMSUNG_DEV_KEYPAD > - help > - Machine support for Samsung GONI board > - S5PC110(MCP) is one of package option of S5PV210 Ditto. > -config MACH_SMDKC110 > - bool "SMDKC110" > - select CPU_S5PV210 > - select S3C_DEV_I2C1 > - select S3C_DEV_I2C2 > - select S3C_DEV_RTC > - select S3C_DEV_WDT > - select S5PV210_SETUP_I2C1 > - select S5PV210_SETUP_I2C2 > - select S5PV210_SETUP_IDE > - select S5P_DEV_FIMC0 > - select S5P_DEV_FIMC1 > - select S5P_DEV_FIMC2 > - select S5P_DEV_MFC > - select SAMSUNG_DEV_IDE > - help > - Machine support for Samsung SMDKC110 > - S5PC110(MCP) is one of package option of S5PV210 Ditto. > -endmenu > - > menu "S5PV210 Machines" > > -config MACH_SMDKV210 > - bool "SMDKV210" > - select CPU_S5PV210 > - select S3C_DEV_FB > - select S3C_DEV_HSMMC > - select S3C_DEV_HSMMC1 > - select S3C_DEV_HSMMC2 > - select S3C_DEV_HSMMC3 > - select S3C_DEV_I2C1 > - select S3C_DEV_I2C2 > - select S3C_DEV_RTC > - select S3C_DEV_USB_HSOTG > - select S3C_DEV_WDT > - select S5PV210_SETUP_FB_24BPP > - select S5PV210_SETUP_I2C1 > - select S5PV210_SETUP_I2C2 > - select S5PV210_SETUP_IDE > - select S5PV210_SETUP_KEYPAD > - select S5PV210_SETUP_SDHCI > - select S5PV210_SETUP_USB_PHY > - select S5P_DEV_FIMC0 > - select S5P_DEV_FIMC1 > - select S5P_DEV_FIMC2 > - select S5P_DEV_JPEG > - select S5P_DEV_MFC > - select SAMSUNG_DEV_ADC > - select SAMSUNG_DEV_BACKLIGHT > - select SAMSUNG_DEV_IDE > - select SAMSUNG_DEV_KEYPAD > - select SAMSUNG_DEV_PWM > - select SAMSUNG_DEV_TS > - help > - Machine support for Samsung SMDKV210 > - Ditto. > -config MACH_TORBRECK > - bool "Torbreck" > - select ARCH_SPARSEMEM_ENABLE > - select CPU_S5PV210 > - select S3C_DEV_HSMMC > - select S3C_DEV_HSMMC1 > - select S3C_DEV_HSMMC2 > - select S3C_DEV_HSMMC3 > - select S3C_DEV_I2C1 > - select S3C_DEV_I2C2 > - select S3C_DEV_RTC > - select S3C_DEV_WDT > - select S5PV210_SETUP_I2C1 > - select S5PV210_SETUP_I2C2 > - select S5PV210_SETUP_SDHCI > - select SAMSUNG_DEV_IDE > - help > - Machine support for aESOP Torbreck > - > config MACH_S5PV210_DT > bool "Samsung S5PV210/S5PC110 machine using Device Tree" > select CLKSRC_OF I assume one or more patches to remove the references to these symbols in sound/soc/samsung/Kconfig are pending. Is that correct? Paul Bolle -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |