From: Kamil Debski <k.debski@xxxxxxxxxxx> On Odroid U2/U3 BUCK8 is used for providing power to also to P3V3 source, which is also connected to LAN9730 chip's nRESET signal. To reset lan chip on system reboot, the BUCK8 output should not be used in 'always on' mode. This change has no impact on X/X2 boards. Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index f793f3b8f0b9..ad2cb32a3439 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -297,7 +297,6 @@ regulator-name = "BUCK8_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; }; }; -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |