Currently configuration of the CDCLK pad is being overwritten in
the i2s_shutdown() callback in order to gate the SoC output clock.
However if an ASoC machine driver doesn't restore that clock
settings each time after opening the sound device this results
in the CDCLK pin being permanently configured into input mode.
I.e. the output clock will always stay disabled.
Fix that by saving the CDCLKCON bit state in i2s_shutdown() and
and restoring it in the i2s_startup() callback.
Signed-off-by: Chen Zhen <zhen1.chen@xxxxxxxxxxx>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
sound/soc/samsung/i2s.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 2ac76fa..3cb3e95 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -68,6 +68,8 @@ struct i2s_dai {
#define DAI_OPENED (1 << 0) /* Dai is opened */
#define DAI_MANAGER (1 << 1) /* Dai is the manager */
unsigned mode;
+ /* CDCLK pin direction: 0 - input, 1 - output */
+ unsigned int cdclk_out:1;
/* Driver for this DAI */
struct snd_soc_dai_driver i2s_dai_drv;
/* DMA parameters */
@@ -737,6 +739,9 @@ static int i2s_startup(struct snd_pcm_substream *substream,
spin_unlock_irqrestore(&lock, flags);
+ if (!is_opened(other) && i2s->cdclk_out)
+ i2s_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
+ 0, SND_SOC_CLOCK_OUT);
return 0;
}
@@ -752,9 +757,13 @@ static void i2s_shutdown(struct snd_pcm_substream *substream,
i2s->mode &= ~DAI_OPENED;
i2s->mode &= ~DAI_MANAGER;
- if (is_opened(other))
+ if (is_opened(other)) {
other->mode |= DAI_MANAGER;
-
+ } else {
+ u32 mod = readl(i2s->addr + I2SMOD);
+ i2s->cdclk_out = !(mod & MOD_CDCLKCON);
+ other->cdclk_out = i2s->cdclk_out;
+ }
/* Reset any constraint on RFS and BFS */
i2s->rfs = 0;
i2s->bfs = 0;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
