[PATCH 13/19] ARM: s5pv210: move debug-macro.S into the common space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
 arch/arm/Kconfig.debug                           | 12 +++++--
 arch/arm/include/debug/s5pv210.S                 | 34 ++++++++++++++++++++
 arch/arm/mach-s5pv210/include/mach/debug-macro.S | 41 ------------------------
 3 files changed, 44 insertions(+), 43 deletions(-)
 create mode 100644 arch/arm/include/debug/s5pv210.S
 delete mode 100644 arch/arm/mach-s5pv210/include/mach/debug-macro.S

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8f90595..c2bcfcf 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -617,6 +617,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -630,6 +631,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -643,6 +645,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -653,8 +656,9 @@ choice
 		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && ARCH_EXYNOS
-		select DEBUG_EXYNOS_UART
+		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use S3C UART 3 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
@@ -949,6 +953,9 @@ config DEBUG_S3C2410_UART
 config DEBUG_S3C24XX_UART
 	bool
 
+config DEBUG_S5PV210_UART
+	bool
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -1009,6 +1016,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S
new file mode 100644
index 0000000..4f1a73e
--- /dev/null
+++ b/arch/arm/include/debug/s5pv210.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
+#define S5PV210_PA_UART	0xe2900000
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, =S5PV210_PA_UART
+		ldr	\rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
deleted file mode 100644
index 30b511a..0000000
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux