Hi Chanwoo,
On 03.07.2014 09:52, Chanwoo Choi wrote:
> From: Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo
> (1 channels) IIS-bus for audio interface with DMA-based operation.
>
> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> Signed-off-by: Inha Song <ideal.song@xxxxxxxxxxx>
> Tested-by: Inha Song <ideal.song@xxxxxxxxxxx>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> index 1f8384f..e9017ef 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -644,6 +644,19 @@
> status = "disabled";
> };
>
> + i2s: i2s@13970000 {
Shouldn't the label be rather called "i2s2" as the pinctrl entry below
suggests?
> + compatible = "samsung,s3c6410-i2s";
> + reg = <0x13970000 0x100>;
> + interrupts = <0 126 0>;
> + clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
> + clock-names = "iis", "i2s_opclk0";
> + dmas = <&pdma0 14>, <&pdma0 13>;
> + dma-names = "tx", "rx";
> + pinctrl-0 = <&i2s2_bus>;
> + pinctrl-name = "default";
"pinctrl-name" is not a valid property. I suppose it should be
"pinctrl-names".
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
