Hi Pankaj,
This looks much better now, but please see my comments inline.
On 25.06.2014 16:03, Pankaj Dubey wrote:
> Under "arm/mach-exynos" many files are using PMU register offsets.
> Since we have added support for accessing PMU base address via DT,
> now we can remove PMU mapping from exynosX_iodesc. Let's convert
> all these access using iomapped address.
> This will help us in removing static mapping of PMU base address
> as well as help in reducing dependency over machine header files.
> Thus helping for migration of PMU implementation from machine to
> driver folder which can be reused for ARM64 bsed SoC.
[snip]
> @@ -152,7 +142,7 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
> {
> struct device_node *np;
> u32 val = 0x1;
> - void __iomem *addr = EXYNOS_SWRESET;
> + void __iomem *addr = NULL;
Instead of initializing this variable to NULL, pmu_base_addr +
EXYNOS_SWRESET could be used instead.
>
> if (of_machine_is_compatible("samsung,exynos5440")) {
> u32 status;
> @@ -165,9 +155,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
> val = __raw_readl(addr);
>
> val = (val & 0xffff0000) | (status & 0xffff);
> - }
> -
> - __raw_writel(val, addr);
> + __raw_writel(val, addr);
> + } else
> + __raw_writel(val, pmu_base_addr + EXYNOS_SWRESET);
The above would allow this code to be left unchanged.
> }
>
[snip]
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index f127c0c..519aefe 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -37,6 +37,9 @@
> #include "regs-pmu.h"
> #include "regs-sys.h"
>
> +#define pmu_raw_writel(val, offset) \
> + __raw_writel(val, pmu_base_addr + offset)
Please make this static inline.
> +
> /**
> * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
> * @hwirq: Hardware IRQ signal of the GIC
> @@ -111,7 +114,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
> */
> void exynos_cpu_power_down(int cpu)
> {
> - __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> + pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> }
>
> /**
> @@ -122,8 +125,8 @@ void exynos_cpu_power_down(int cpu)
> */
> void exynos_cpu_power_up(int cpu)
> {
> - __raw_writel(S5P_CORE_LOCAL_PWR_EN,
> - EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> + pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> + EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> }
>
> /**
> @@ -133,7 +136,7 @@ void exynos_cpu_power_up(int cpu)
> */
> int exynos_cpu_power_state(int cpu)
> {
> - return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
> + return (__raw_readl(pmu_base_addr + EXYNOS_ARM_CORE_STATUS(cpu)) &
> S5P_CORE_LOCAL_PWR_EN);
__raw_readl()s could be replaced with pmu_raw_readl()s too.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
