Re: [PATCH v5 05/14] clk: Add generic driver for Maxim PMIC clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 30, 2014 at 12:58:57PM +0200, Javier Martinez Canillas wrote:
> >> +       if (!max_gen->lookup)
> >> +               return ERR_PTR(-ENOMEM);
> >> +
> >> +       max_gen->lookup->con_id = hw->init->name;
> > 
> > Also IMO,  init->name should be over-written if name is provided in DT,
> > otherwise generic "clock-output-names" property will go futile,
> > perhaps it should be done before clk_register.
> > 
> 
> Even though Documentation/devicetree/bindings/clock/clock-bindings.txt says that
> the "clock-output-names" property is optional I agree with you that will be
> better to support it. So I'll add it on the next version as well.

However, remember that con_id is the _DEVICE_ specific connection name,
not the _CLOCK_ name.  You will get a NAK from me if you violate this
rule.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux