Hi Andrej,
On Fri, Jun 27, 2014 at 4:52 PM, Andrzej Hajda <a.hajda@xxxxxxxxxxx> wrote:
> Hi Ajay,
>
> +CC DT
>
> On 06/27/2014 12:12 PM, Ajay Kumar wrote:
>> Add the missing setting for DP CLKCON register.
>>
>> This register is present on Exynos5 based FIMD controllers,
>> and needs to be set if we are using DP.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/video/samsung-fimd.txt | 1 +
>> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 23 ++++++++++++++++++++
>> include/video/samsung_fimd.h | 4 ++++
>> 3 files changed, 28 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
>> index 2dad41b..12f3d7a 100644
>> --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt
>> +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
>> @@ -41,6 +41,7 @@ Optional Properties:
>> - samsung,power-domain: a phandle to FIMD power domain node.
>> - samsung,invert-vden: video enable signal is inverted
>> - samsung,invert-vclk: video clock signal is inverted
>> +- samsung,output-type: Type of display output interface(DPI=0, DSI=1, DP=2)
>
> There is no point in introducing this property. Exynos DRM have already
> logic which creates pipeline: fimd --> DPI|DSI|DP, this logic can be
> reused to determine display type. It can be done even without any
> additional callbacks, just by checking if there is connector of
> DRM_MODE_CONNECTOR_eDP type connected to fimd.
The mapping between crtc(struct exynos_drm_manager) and encoder(struct
exynos_drm_display)
in exynos drm happens by matching the exynos_drm_output_type variable in each
structure.
exynos_drm_output_type supports 3 types: LCD, HDMI and VIDI.
FIMD statically chooses EXYNOS_DISPLAY_TYPE_LCD as the output type,
and both DP and MIPI statically choose the same enum EXYNOS_DISPLAY_TYPE_LCD,
as output type.
So, we cannot use that logic to differentiate between DP/MIPI DSI.
Also, checking based on connector type doesn't hold good.
The connector type will be DRM_MODE_CONNECTOR_LVDS in case of
DP->LVDS or MIPI->LVDS panels!
Thanks and regards,
Ajay Kumar
>
> Regards
> Andrzej
>
>> - display-timings: timing settings for FIMD, as described in document [1].
>> Can be used in case timings cannot be provided otherwise
>> or to override timings provided by the panel.
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> index 33161ad..aa74e90 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> @@ -72,6 +72,7 @@ struct fimd_driver_data {
>> unsigned int has_shadowcon:1;
>> unsigned int has_clksel:1;
>> unsigned int has_limited_fmt:1;
>> + unsigned int has_dp_clkcon:1;
>> };
>>
>> static struct fimd_driver_data s3c64xx_fimd_driver_data = {
>> @@ -88,6 +89,13 @@ static struct fimd_driver_data exynos4_fimd_driver_data = {
>> static struct fimd_driver_data exynos5_fimd_driver_data = {
>> .timing_base = 0x20000,
>> .has_shadowcon = 1,
>> + .has_dp_clkcon = 1,
>> +};
>> +
>> +enum exynos_fimd_output_type {
>> + EXYNOS_FIMD_OUTPUT_DPI,
>> + EXYNOS_FIMD_OUTPUT_DSI,
>> + EXYNOS_FIMD_OUTPUT_DP,
>> };
>>
>> struct fimd_win_data {
>> @@ -125,6 +133,8 @@ struct fimd_context {
>> struct exynos_drm_panel_info panel;
>> struct fimd_driver_data *driver_data;
>> struct exynos_drm_display *display;
>> +
>> + enum exynos_fimd_output_type exynos_fimd_output_type;
>> };
>>
>> static const struct of_device_id fimd_driver_dt_match[] = {
>> @@ -331,6 +341,10 @@ static void fimd_commit(struct exynos_drm_manager *mgr)
>> if (clkdiv > 1)
>> val |= VIDCON0_CLKVAL_F(clkdiv - 1) | VIDCON0_CLKDIR;
>>
>> + if (ctx->driver_data->has_dp_clkcon &&
>> + ctx->exynos_fimd_output_type == EXYNOS_FIMD_OUTPUT_DP)
>> + writel(DP_CLK_ENABLE, ctx->regs + DP_CLKCON);
>> +
>> writel(val, ctx->regs + VIDCON0);
>> }
>>
>> @@ -924,6 +938,7 @@ static int fimd_probe(struct platform_device *pdev)
>> struct device *dev = &pdev->dev;
>> struct fimd_context *ctx;
>> struct resource *res;
>> + u32 fimd_output_type;
>> int ret = -EINVAL;
>>
>> ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC,
>> @@ -949,6 +964,14 @@ static int fimd_probe(struct platform_device *pdev)
>> ctx->vidcon1 |= VIDCON1_INV_VDEN;
>> if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
>> ctx->vidcon1 |= VIDCON1_INV_VCLK;
>> + if (!of_property_read_u32(dev->of_node, "samsung,output-type",
>> + &fimd_output_type)) {
>> + if ((fimd_output_type < EXYNOS_FIMD_OUTPUT_DPI) ||
>> + (fimd_output_type > EXYNOS_FIMD_OUTPUT_DP))
>> + dev_err(dev, "invalid output type for FIMD\n");
>> + else
>> + ctx->exynos_fimd_output_type = fimd_output_type;
>> + }
>>
>> ctx->bus_clk = devm_clk_get(dev, "fimd");
>> if (IS_ERR(ctx->bus_clk)) {
>> diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h
>> index b039320..d8f4b0b 100644
>> --- a/include/video/samsung_fimd.h
>> +++ b/include/video/samsung_fimd.h
>> @@ -435,6 +435,10 @@
>> #define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0)
>> #define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0)
>>
>> +/* Video clock enable for DP */
>> +#define DP_CLKCON 0x27C
>> +#define DP_CLK_ENABLE 0x2
>> +
>> /* Notes on per-window bpp settings
>> *
>> * Value Win0 Win1 Win2 Win3 Win 4
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
