Hi Doug,
On Thu, June 26, 2014, Doug Anderson wrote:
> Seungwon,
>
> On Wed, Jun 25, 2014 at 4:18 AM, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
> >> >> + case MMC_POWER_ON:
> >> >> + if (!IS_ERR(mmc->supply.vqmmc) &&
> >> >> + !test_bit(DW_MMC_IO_POWERED, &slot->flags)) {
> > You can use regulator_is_enabled() instead of flag bit, DW_MMC_IO_POWERED.
>
> I'd be a little worried about regulator_is_enabled() since regulators
> are reference counted. What if someone else is sharing this
> regulator? The regulator might happen to be enabled when you check it
> but unless you add your own dw_mmc reference count they might turn it
> off.
Cool, that's a possibility. Some assumption may need.
If mmc's core can guarantee its balance, I think we don't need to consider some flag.
Thanks,
Seungwon Jeon
>
> > Important thing is that if powering vmmc failed at MMC_POWER_UP, vqmmc should not be powered.
>
> Good point.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
