On Wed, Jun 25, 2014 at 03:37:25PM +0200, Tomasz Figa wrote: > This series intends to add support for L2 cache on Exynos4 SoCs on boards > running under secure firmware, which requires certain initialization steps > to be done with help of firmware, as selected registers are writable only > from secure mode. What I said in my message on June 12th applies to this series. I'm not having the virtual address exposed via the write_sec call. Yes, you need to read other registers in order to use your secure firmware implementation. Let's fix that by providing a better write_sec interface so you don't have to read back these registers, rather than working around this short-coming. That's exactly what I meant when I talked on June 12th about turning cache-l2x0.c back into a pile of crap. You're working around problems rather than fixing the underlying issue, as seems to be standard platform maintainer behaviour when things like core ARM code is concerned. This is why things devolve over time into piles of crap, because platforms just hack around problems rather than fixing the root cause of the problem. So... I'm NAKing the entire series. -- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |