Re: [PATCH v2 07/10] regulator: Add driver for Maxim 77802 PMIC regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Mark,

On 06/17/2014 04:12 PM, Mark Brown wrote:
> On Tue, Jun 17, 2014 at 12:49:56PM +0200, Javier Martinez Canillas wrote:
>> On 06/16/2014 09:25 PM, Mark Brown wrote:
> 
>> >> +	config.dev = &pdev->dev;
> 
>> > Are you sure this shouldn't be the MFD?
> 
>> I just looked at regulator_register() and saw that it does rdev->dev.parent =
>> dev, so yes this has to be the MFD.
>

I noticed that many drivers set config.dev = &pdev->dev. The original Chrome OS
max77xxx driver and max77686 are two examples but others drivers do the same:

$ git grep "config.dev = &pdev->dev" drivers/regulator/ | wc -l
35
$ git grep "config.dev = pdev->dev.parent" drivers/regulator/ | wc -l
11

And also I see that mfd_add_device() calls
devm_regulator_bulk_register_supply_alias(&pdev->dev,...) so I'm confused now
about what the correct device should be...

> Do the regulators manage to get their supplies?
> 

There are no current support in mainline for the devices that use the regulators
in this PMIC so I can't tell you if consumers manage to get their supplies
correctly (e.g: if regulator_dev_lookup succeeds).

But I see in the kernel log that the regulators are registered and configured as
expected [0] and also the driver in the Chrome OS 3.8 kernel is working for sure
and sets config.dev to &pdev->dev instead of the MFD.

>> So, for now I thought it made sense to set the operating mode to normal on
>> probe() but I'll change it to read from the hardware if that is better.
> 
> Yes, otherwise if the device is configured otherwise then when we change
> the configuration we may break something.
> 
>> I guess I should check in the datasheet if a sane default operating mode for
>> LDOs is expected when the chip is reseted or if this is left undefined and also
>> if the bootloader already set this.
> 
> You can't do anything based on the particular bootloader you're using in
> your current system, this has to work in other systems.
> 

Yes, that's why I thought it was a good idea to set to a default operational
mode but I'll change it to read from the hardware instead.

Thanks a lot and best regards,
Javier

[0]: http://pastebin.com/raw.php?i=8yyMXcGD
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux