From: Bill Richardson <wfrichar@xxxxxxxxxxxx>
When communicating with the EC, the cmd_xfer() function should return the
number of bytes it received from the EC, or negative on error.
Signed-off-by: Bill Richardson <wfrichar@xxxxxxxxxxxx>
Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-cros-ec-tunnel.c | 2 +-
drivers/mfd/cros_ec_i2c.c | 2 +-
drivers/mfd/cros_ec_spi.c | 2 +-
include/linux/mfd/cros_ec.h | 8 ++++----
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index dd07818..05e033c 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -228,7 +228,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
msg.insize = response_len;
result = bus->ec->cmd_xfer(bus->ec, &msg);
- if (result)
+ if (result < 0)
goto exit;
result = ec_i2c_parse_response(response, i2c_msgs, &num);
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
index 2276096..dc0ba29 100644
--- a/drivers/mfd/cros_ec_i2c.c
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -120,7 +120,7 @@ static int cros_ec_cmd_xfer_i2c(struct cros_ec_device *ec_dev,
goto done;
}
- ret = 0;
+ ret = i2c_msg[1].buf[1];
done:
kfree(in_buf);
kfree(out_buf);
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 4d34f1c..beba1bc 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -333,7 +333,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
goto exit;
}
- ret = 0;
+ ret = len;
exit:
mutex_unlock(&ec_spi->lock);
return ret;
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 60c0880..7b65a75 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -41,7 +41,7 @@ enum {
* @outdata: Outgoing data to EC
* @outsize: Outgoing length in bytes
* @indata: Where to put the incoming data from EC
- * @insize: Incoming length in bytes (filled in by EC)
+ * @insize: Max number of bytes to accept from EC
* @result: EC's response to the command (separate from communication failure)
*/
struct cros_ec_command {
@@ -64,9 +64,9 @@ struct cros_ec_command {
* sleep at the last suspend
* @event_notifier: interrupt event notifier for transport devices
* @cmd_xfer: send command to EC and get response
- * Returns 0 if the communication succeeded, but that doesn't mean the EC
- * was happy with the command it got. Caller should check msg.result for
- * the EC's result code.
+ * Returns the number of bytes received if the communication succeeded, but
+ * that doesn't mean the EC was happy with the command. The caller
+ * should check msg.result for the EC's result code.
*
* @priv: Private data
* @irq: Interrupt to use
--
2.0.0.526.g5318336
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
