On Fri, Jun 6, 2014 at 5:36 AM, Mark Brown <broonie@xxxxxxxxxx> wrote: > From: Mark Brown <broonie@xxxxxxxxxx> > > Since the OPP layer is a kernel library which has been converted to be > directly selectable by its callers rather than user selectable and > requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol > has become redundant and can be removed. Do so. > > Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- > Documentation/power/opp.txt | 3 --- > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-highbank/Kconfig | 1 - > arch/arm/mach-imx/Kconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm/mach-shmobile/Kconfig | 2 -- > arch/arm/mach-vexpress/Kconfig | 1 - > arch/arm/mach-zynq/Kconfig | 1 - > drivers/devfreq/Kconfig | 1 - > kernel/power/Kconfig | 3 --- > 10 files changed, 15 deletions(-) > > diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt > index a9adad8..c6279c2 100644 > --- a/Documentation/power/opp.txt > +++ b/Documentation/power/opp.txt > @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows: > SoC framework -> modifies on required cases certain OPPs -> OPP layer > -> queries to search/retrieve information -> > > -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP > -to make the OPP layer available. > - > OPP layer expects each domain to be represented by a unique device pointer. SoC > framework registers a set of initial OPPs per device with the OPP layer. This > list is expected to be an optimally small number typically around 5 per device. > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index d58995c9..3f78c45 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -103,7 +103,6 @@ config SOC_EXYNOS5440 > default y > depends on ARCH_EXYNOS5 > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > - select ARCH_HAS_OPP > select HAVE_ARM_ARCH_TIMER > select AUTO_ZRELADDR > select MIGHT_HAVE_PCI > diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig > index 830b76e..bef970f 100644 > --- a/arch/arm/mach-highbank/Kconfig > +++ b/arch/arm/mach-highbank/Kconfig > @@ -3,7 +3,6 @@ config ARCH_HIGHBANK > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select ARCH_HAS_CPUFREQ > select ARCH_HAS_HOLES_MEMORYMODEL > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_ERRATA_764369 if SMP > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 4cce93d..95690e4 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_MXC > bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select ARM_CPU_SUSPEND if PM > select CLKSRC_MMIO > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 0ba4826..524b027 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -12,7 +12,6 @@ config ARCH_OMAP3 > bool "TI OMAP3" > depends on ARCH_MULTI_V7 > select ARCH_OMAP2PLUS > - select ARCH_HAS_OPP > select ARM_CPU_SUSPEND if PM > select OMAP_INTERCONNECT > select PM_OPP if PM > diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig > index dbd954e..b51d142 100644 > --- a/arch/arm/mach-shmobile/Kconfig > +++ b/arch/arm/mach-shmobile/Kconfig > @@ -86,7 +86,6 @@ config ARCH_R8A73A4 > select SH_CLK_CPG > select RENESAS_IRQC > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select SYS_SUPPORTS_SH_CMT > select SYS_SUPPORTS_SH_TMU > > @@ -265,7 +264,6 @@ config MACH_KZM9G > bool "KZM-A9-GT board" > depends on ARCH_SH73A0 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_REQUIRE_GPIOLIB > select REGULATOR_FIXED_VOLTAGE if REGULATOR > select SND_SOC_AK4642 if SND_SIMPLE_CARD > diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig > index 90249cf..71629fe 100644 > --- a/arch/arm/mach-vexpress/Kconfig > +++ b/arch/arm/mach-vexpress/Kconfig > @@ -66,7 +66,6 @@ config ARCH_VEXPRESS_DCSCB > config ARCH_VEXPRESS_SPC > bool "Versatile Express Serial Power Controller (SPC)" > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select PM_OPP > help > The TC2 (A15x2 A7x3) versatile express core tile integrates a logic > diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig > index 573e0db..bc485f2 100644 > --- a/arch/arm/mach-zynq/Kconfig > +++ b/arch/arm/mach-zynq/Kconfig > @@ -1,7 +1,6 @@ > config ARCH_ZYNQ > bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 > select ARCH_HAS_CPUFREQ > - select ARCH_HAS_OPP > select ARCH_SUPPORTS_BIG_ENDIAN > select ARM_AMBA > select ARM_GIC > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig > index 49e74c1..3dced0a 100644 > --- a/drivers/devfreq/Kconfig > +++ b/drivers/devfreq/Kconfig > @@ -68,7 +68,6 @@ comment "DEVFREQ Drivers" > config ARM_EXYNOS4_BUS_DEVFREQ > bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver" > depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM > - select ARCH_HAS_OPP > select DEVFREQ_GOV_SIMPLE_ONDEMAND > select PM_OPP > help > diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig > index 9a83d78..e4e4121 100644 > --- a/kernel/power/Kconfig > +++ b/kernel/power/Kconfig > @@ -253,9 +253,6 @@ config APM_EMULATION > anything, try disabling/enabling this option (or disabling/enabling > APM in your BIOS). > > -config ARCH_HAS_OPP > - bool > - > config PM_OPP > bool > ---help--- > -- > 2.0.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |