The RFC version of this series was posted long time back, around December last year [1]. This series is based on Heikki's patches for simpliefied phy lookup table: [PATCHv2 0/6] phy: simplified phy lookup [2], applied against 'usb-next' branch of Greg's usb tree. Tested on peach-pit boards with SuperSpeed devices and confirmed that now the devices are detected as SupedSpeed, not as HighSpeed. Explanation for the need of this patch-series: "The DWC3-exynos eXtensible host controller present on Exynos5420 SoC is quirky. The PHY serving this controller operates at High-Speed by default, so it detects even Super-speed devices as high-speed ones. Certain PHY parameters like Tx LOS levels and Boost levels need to be calibrated further post initialization of xHCI controller, to get SuperSpeed operations working." [1] https://lkml.org/lkml/2013/12/10/365 [2] https://lkml.org/lkml/2014/6/5/358 Vivek Gautam (4): phy: Add provision for calibrating phy. usb: host: xhci-plat: Add support to get PHYs usb: host: xhci-plat: Caibrate PHY post host reset phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800 drivers/phy/phy-core.c | 36 ++++++++ drivers/phy/phy-exynos5-usbdrd.c | 168 ++++++++++++++++++++++++++++++++++++++ drivers/usb/host/xhci-plat.c | 74 ++++++++++++++++- drivers/usb/host/xhci.h | 3 + include/linux/phy/phy.h | 7 ++ 5 files changed, 286 insertions(+), 2 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |