Re: [PATCH V3 5/8] drm/panel: Add driver for lvds/edp based panels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 6, 2014 at 12:47 AM, Ajay kumar <ajaynumb@xxxxxxxxx> wrote:
> +Device tree list
>
> On Fri, Jun 6, 2014 at 12:40 AM, Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> wrote:
>> This patch adds a simple driver to handle all the LCD and LED
>> powerup/down routines needed to support eDP/LVDS panels.
>>
>> The LCD and LED units are usually powered up via regulators,
>> and almost on all boards, we will have a BACKLIGHT_EN pin to
>> enable/ disable the backlight.
>> Sometimes, we can have LCD_EN switches as well.
>>
>> The routines in this driver can be used to control
>> panel power sequence on such boards.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> Signed-off-by: Rahul Sharma <Rahul.Sharma@xxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/panel/panel-lvds.txt       |   50 ++++
>>  drivers/gpu/drm/panel/Kconfig                      |   18 ++
>>  drivers/gpu/drm/panel/Makefile                     |    2 +
>>  drivers/gpu/drm/panel/panel-lvds.c                 |  262 ++++++++++++++++++++
>>  4 files changed, 332 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/panel/panel-lvds.txt
>>  create mode 100644 drivers/gpu/drm/panel/panel-lvds.c
>>
>> diff --git a/Documentation/devicetree/bindings/panel/panel-lvds.txt b/Documentation/devicetree/bindings/panel/panel-lvds.txt
>> new file mode 100644
>> index 0000000..465016d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/panel-lvds.txt
>> @@ -0,0 +1,50 @@
>> +panel interface for eDP/lvds panels
>> +
>> +Required properties:
>> +  - compatible: "panel-lvds"
>> +
>> +Optional properties:
>> +       -lcd-en-gpio:
>> +               panel LCD poweron GPIO.
>> +                       Indicates which GPIO needs to be powered up as output
>> +                       to powerup/enable the switch to the LCD panel.
>> +       -led-en-gpio:
>> +               panel LED enable GPIO.
>> +                       Indicates which GPIO needs to be powered up as output
>> +                       to enable the backlight.
>> +       -panel-prepare-delay:
>> +               delay value in ms required for panel_prepare process
>> +                       Delay in ms needed for the panel LCD unit to
>> +                       powerup completely.
>> +                       ex: delay needed till eDP panel throws HPD.
>> +                           delay needed so that we cans tart reading edid.
>> +       -panel-enable-delay:
>> +               delay value in ms required for panel_enable process
>> +                       Delay in ms needed for the panel backlight/LED unit
>> +                       to powerup, and delay needed between video_enable and
>> +                       backlight_enable.
>> +       -panel-disable-delay:
>> +               delay value in ms required for panel_disable process
>> +                       Delay in ms needed for the panel backlight/LED unit
>> +                       powerdown, and delay needed between backlight_disable
>> +                       and video_disable.
>> +       -panel-unprepare-delay:
>> +               delay value in ms required for panel_post_disable process
>> +                       Delay in ms needed for the panel LCD unit to
>> +                       to powerdown completely, and the minimum delay needed
>> +                       before powering it on again.
>> +       -panel-width-mm: physical panel width [mm]
>> +       -panel-height-mm: physical panel height [mm]
>> +
>> +Example:
>> +
>> +       panel-lvds {
>> +               compatible = "panel-lvds";
>> +               led-en-gpio = <&gpx3 0 1>;
>> +               panel-pre-enable-delay = <40>;
>> +               panel-enable-delay = <20>;
>> +               panel-disable-delay = <20>;
>> +               panel-post-disable-delay = <30>;
>> +               panel-width-mm = <256>;
>> +               panel-height-mm = <144>;
>> +       };
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 4ec874d..3743947 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -30,4 +30,22 @@ config DRM_PANEL_S6E8AA0
>>         select DRM_MIPI_DSI
>>         select VIDEOMODE_HELPERS
>>
>> +config DRM_PANEL_LVDS
>> +       tristate "support for LVDS panels"
>> +       depends on OF && DRM_PANEL
>> +       help
>> +         DRM panel driver for LVDS connected via DP bridges that need at most
>> +         a regulator for LCD unit, a regulator for LED unit and/or enable
>> +         GPIOs for LCD or LED units. Delay values can also be
>> +         specified to support powerup and powerdown process.
>> +
>> +config DRM_PANEL_EDP
>> +       tristate "support for eDP panels"
>> +       depends on OF && DRM_PANEL
>> +       help
>> +         DRM panel driver for eDP panels that need at most a
>> +         regulator for LCD unit, a regulator for LED unit and/or enable
>> +         GPIOs for LCD or LED units. Delay values can also be
>> +         specified to support powerup and powerdown process.
>> +
>>  endmenu
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 8b92921..9c4f120 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -1,3 +1,5 @@
>>  obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
>>  obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
>>  obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
>> +obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
>> +obj-$(CONFIG_DRM_PANEL_EDP) += panel-lvds.o
>> diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
>> new file mode 100644
>> index 0000000..4dfb322
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-lvds.c
>> @@ -0,0 +1,262 @@
>> +/*
>> + * panel driver for lvds and eDP panels
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
>> + *
>> + * Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/gpio.h>
>> +#include <linux/module.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_panel.h>
>> +
>> +struct panel_lvds {
>> +       struct drm_panel        base;
>> +       struct regulator        *backlight_fet;
>> +       struct regulator        *lcd_fet;
>> +       struct videomode        vm;
>> +       int                     width_mm;
>> +       int                     height_mm;
>> +       bool                    backlight_fet_enabled;
>> +       bool                    lcd_fet_enabled;
>> +       int                     led_en_gpio;
>> +       int                     lcd_en_gpio;
>> +       int                     panel_prepare_delay;
>> +       int                     panel_enable_delay;
>> +       int                     panel_disable_delay;
>> +       int                     panel_unprepare_delay;
>> +};
>> +
>> +static inline struct panel_lvds *to_panel(struct drm_panel *panel)
>> +{
>> +       return container_of(panel, struct panel_lvds, base);
>> +}
>> +
>> +static int panel_lvds_prepare(struct drm_panel *panel)
>> +{
>> +       struct panel_lvds *lvds_panel = to_panel(panel);
>> +
>> +       if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet))
>> +               if (!lvds_panel->lcd_fet_enabled) {
>> +                       if (regulator_enable(lvds_panel->lcd_fet))
>> +                               DRM_ERROR("failed to enable LCD fet\n");
>> +                       lvds_panel->lcd_fet_enabled = true;
>> +               }
>> +
>> +       if (gpio_is_valid(lvds_panel->lcd_en_gpio))
>> +               gpio_set_value(lvds_panel->lcd_en_gpio, 1);
>> +
>> +       msleep(lvds_panel->panel_prepare_delay);
>> +
>> +       return 0;
>> +}
>> +
>> +static int panel_lvds_enable(struct drm_panel *panel)
>> +{
>> +       struct panel_lvds *lvds_panel = to_panel(panel);
>> +
>> +       if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet))
>> +               if (!lvds_panel->backlight_fet_enabled) {
>> +                       if (regulator_enable(lvds_panel->backlight_fet))
>> +                               DRM_ERROR("failed to enable LED fet\n");
>> +                       lvds_panel->backlight_fet_enabled = true;
>> +               }
>> +
>> +       msleep(lvds_panel->panel_enable_delay);
>> +
>> +       if (gpio_is_valid(lvds_panel->led_en_gpio))
>> +               gpio_set_value(lvds_panel->led_en_gpio, 1);
>> +
>> +       return 0;
>> +}
>> +
>> +static int panel_lvds_disable(struct drm_panel *panel)
>> +{
>> +       struct panel_lvds *lvds_panel = to_panel(panel);
>> +
>> +       if (gpio_is_valid(lvds_panel->led_en_gpio))
>> +               gpio_set_value(lvds_panel->led_en_gpio, 0);
>> +
>> +       if (!IS_ERR_OR_NULL(lvds_panel->backlight_fet))
>> +               if (lvds_panel->backlight_fet_enabled) {
>> +                       regulator_disable(lvds_panel->backlight_fet);
>> +                       lvds_panel->backlight_fet_enabled = false;
>> +               }
>> +
>> +       msleep(lvds_panel->panel_disable_delay);
>> +
>> +       return 0;
>> +}
>> +
>> +static int panel_lvds_unprepare(struct drm_panel *panel)
>> +{
>> +       struct panel_lvds *lvds_panel = to_panel(panel);
>> +
>> +       if (gpio_is_valid(lvds_panel->lcd_en_gpio))
>> +               gpio_set_value(lvds_panel->lcd_en_gpio, 0);
>> +
>> +       if (!IS_ERR_OR_NULL(lvds_panel->lcd_fet))
>> +               if (lvds_panel->lcd_fet_enabled) {
>> +                       regulator_disable(lvds_panel->lcd_fet);
>> +                       lvds_panel->lcd_fet_enabled = false;
>> +               }
>> +
>> +       msleep(lvds_panel->panel_unprepare_delay);
>> +
>> +       return 0;
>> +}
>> +
>> +static int panel_lvds_get_modes(struct drm_panel *panel)
>> +{
>> +       struct drm_connector *connector = panel->connector;
>> +       struct panel_lvds *lvds_panel = to_panel(panel);
>> +       struct drm_display_mode *mode;
>> +
>> +       mode = drm_mode_create(connector->dev);
>> +       if (!mode) {
>> +               DRM_ERROR("failed to create a new display mode.\n");
>> +               return 0;
>> +       }
>> +
>> +       drm_display_mode_from_videomode(&lvds_panel->vm, mode);
>> +       mode->width_mm = lvds_panel->width_mm;
>> +       mode->height_mm = lvds_panel->height_mm;
>> +       connector->display_info.width_mm = mode->width_mm;
>> +       connector->display_info.height_mm = mode->height_mm;
>> +
>> +       mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>> +       drm_mode_set_name(mode);
>> +       drm_mode_probed_add(connector, mode);
>> +
>> +       return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs panel_lvds_funcs = {
>> +       .unprepare = panel_lvds_unprepare,
>> +       .disable = panel_lvds_disable,
>> +       .prepare = panel_lvds_prepare,
>> +       .enable = panel_lvds_enable,
>> +       .get_modes = panel_lvds_get_modes,
>> +};
>> +
>> +static int panel_lvds_probe(struct platform_device *pdev)
>> +{
>> +       struct panel_lvds *panel;
>> +       struct device *dev = &pdev->dev;
>> +       struct device_node *node = dev->of_node;
>> +       int ret;
>> +
>> +       panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
>> +       if (!panel)
>> +               return -ENOMEM;
>> +
>> +       ret = of_get_videomode(node, &panel->vm, 0);
>> +       if (ret) {
>> +               DRM_ERROR("failed: of_get_videomode() : %d\n", ret);
>> +               return ret;
>> +       }
>> +
>> +       panel->lcd_fet = devm_regulator_get_optional(dev, "lcd_vdd");
>> +       if (IS_ERR(panel->lcd_fet))
>> +               return -EPROBE_DEFER;
>> +
>> +       panel->backlight_fet = devm_regulator_get_optional(dev, "vcd_led");
>> +       if (IS_ERR(panel->backlight_fet))
>> +               return -EPROBE_DEFER;
>> +
>> +       panel->lcd_en_gpio = of_get_named_gpio(node, "lcd-en-gpio", 0);
>> +       panel->led_en_gpio = of_get_named_gpio(node, "led-en-gpio", 0);
>> +
>> +       of_property_read_u32(node, "panel-width-mm", &panel->width_mm);
>> +       of_property_read_u32(node, "panel-height-mm", &panel->height_mm);
>> +
>> +       of_property_read_u32(node, "panel-pre-enable-delay",
>> +                                       &panel->panel_prepare_delay);
>> +       of_property_read_u32(node, "panel-enable-delay",
>> +                                       &panel->panel_enable_delay);
>> +       of_property_read_u32(node, "panel-disable-delay",
>> +                                       &panel->panel_disable_delay);
>> +       of_property_read_u32(node, "panel-post-disable-delay",
>> +                                       &panel->panel_unprepare_delay);
>> +
>> +       if (gpio_is_valid(panel->lcd_en_gpio)) {
>> +               ret = devm_gpio_request_one(dev, panel->lcd_en_gpio,
>> +                                       GPIOF_OUT_INIT_LOW, "lcd_en_gpio");
>> +               if (ret) {
>> +                       DRM_ERROR("failed to get lcd-en gpio [%d]\n", ret);
>> +                       return 0;
>> +               }
>> +       } else {
>> +               panel->lcd_en_gpio = -ENODEV;
>> +       }
>> +
>> +       if (gpio_is_valid(panel->led_en_gpio)) {
>> +               ret = devm_gpio_request_one(dev, panel->led_en_gpio,
>> +                                       GPIOF_OUT_INIT_LOW, "led_en_gpio");
>> +               if (ret) {
>> +                       DRM_ERROR("failed to get led-en gpio [%d]\n", ret);
>> +                       return 0;
>> +               }
>> +       } else {
>> +               panel->led_en_gpio = -ENODEV;
>> +       }
>> +
>> +       drm_panel_init(&panel->base);
>> +       panel->base.dev = dev;
>> +       panel->base.funcs = &panel_lvds_funcs;
>> +
>> +       ret = drm_panel_add(&panel->base);
>> +       if (ret < 0)
>> +               return ret;
>> +
>> +       dev_set_drvdata(dev, panel);
>> +
>> +       return 0;
>> +}
>> +
>> +static int panel_lvds_remove(struct platform_device *pdev)
>> +{
>> +       struct panel_lvds *panel = dev_get_drvdata(&pdev->dev);
>> +
>> +       panel_lvds_disable(&panel->base);
>> +       panel_lvds_unprepare(&panel->base);
>> +
>> +       drm_panel_remove(&panel->base);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct of_device_id lvds_panel_dt_match[] = {
>> +       { .compatible = "panel-lvds" },
>> +       {},
>> +};
>> +MODULE_DEVICE_TABLE(of, lvds_panel_dt_match);
>> +
>> +struct platform_driver lvds_panel_driver = {
>> +       .driver = {
>> +               .name = "panel_lvds",
>> +               .owner = THIS_MODULE,
>> +               .of_match_table = lvds_panel_dt_match,
>> +       },
>> +       .probe = panel_lvds_probe,
>> +       .remove = panel_lvds_remove,
>> +};
>> +module_platform_driver(lvds_panel_driver);
>> +
>> +MODULE_AUTHOR("Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("lvds/eDP panel driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 1.7.9.5
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux