Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@xxxxxxxxxxx> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@xxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5410-smdk5410.dts | 82 ++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 206 +++++++++++++++++++++++++++++ 3 files changed, 289 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts create mode 100644 arch/arm/boot/dts/exynos5410.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cd399a2..709f862 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts new file mode 100644 index 0000000..7275bbd --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -0,0 +1,82 @@ +/* + * SAMSUNG SMDK5410 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "Samsung SMDK5410 board based on EXYNOS5410"; + compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02037000 { + compatible = "samsung,secure-firmware"; + reg = <0x02037000 0x1000>; + }; + +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi new file mode 100644 index 0000000..3839c26 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -0,0 +1,206 @@ +/* + * SAMSUNG EXYNOS5410 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. + * EXYNOS5410 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos5410.h> + +/ { + compatible = "samsung,exynos5410", "samsung,exynos5"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0xB00>; + interrupt-parent = <&interrupt_map>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + interrupt_map: interrupt-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; +}; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |